Skip to main content

Gamepad Tester

AnsweredVerified By Gamepad TesterVerified By Gamepad Tester

Should I Run The Manual Pixel Refresh On My OLED Monitor Often?

Asked by Sabine M.0 views

My OLED monitor has a manual pixel refresh option that takes about an hour, plus it does short refreshes automatically. Should I run the long one regularly to prevent burn-in? Your burn-in test shows nothing yet.

Brand
Not stated
Model
Monitor
Connection
DisplayPort
System
Windows 11
Browser
Chrome 153
Short Answer

Let the automatic short refreshes run, which handle routine compensation. Run the long manual refresh only when you see image retention that does not clear, or when the monitor asks, following the manufacturer's guidance. Running it constantly does not add protection and some makers advise against it.

Verified By Gamepad TesterVerified By Gamepad Tester
Simon Fletcher
Simon FletcherVerified Gamepad Tester team memberGamepad Tester Team
Browser Compatibility Tester · 24+ years experience · Answered Oct 14, 2026

Most OLED monitors handle this in two levels, and they are designed to be used differently.

The short refresh runs automatically, usually when the monitor goes into standby after a few hours of use. It compensates for small differences between pixels and keeps the panel even. Let it run by allowing the monitor to go into standby normally rather than switching off at the wall.

The long manual refresh is a deeper compensation cycle. Manufacturers generally intend it for when you notice image retention that does not fade, or when the monitor prompts you after a long period of use. It is not a preventive routine to run every week.

Some manufacturers advise against running the long refresh too often, because it is a stronger adjustment of the panel's compensation. Check your monitor's manual for its specific guidance, since behaviour differs between brands.

So the routine is simple: let automatic refreshes happen, use our burn-in test's grey screen as a monthly check, and run the manual refresh only if you see a ghost that does not clear after the monitor has rested.

Step By Step Fix
  1. Let the monitor enter standby so automatic short refreshes can run.
  2. Avoid switching off at the wall right after use.
  3. Check the burn-in test's grey screen monthly.
  4. Run the manual long refresh only for retention that does not clear, or when prompted.
  5. Follow your monitor manual's guidance on refresh frequency.

Tested on: Applies to OLED monitors and TVs with pixel refresh features. Behaviour varies by manufacturer; follow the model's manual.

Checked by Calder Wright on . How we verify answers

Did this fix your controller?
Was this answer helpful?
Share this guide

Community Replies 3

  • Accepted Solution
    Theodora PryceCommunity Member

    My manual says run it only when prompted. Automatic refresh in standby is the main thing.

  • Sabine MorrellCommunity Member

    Good to know. Letting it do the automatic ones and saving the long one for if I ever see retention.

  • Rohan KamathCommunity Member

    Switching off at the plug was stopping my monitor's refresh. Changed that habit.

Add Your Reply

Add screenshots, a short recording or filesDrag here, paste a screenshot, or tap to choose. Up to 2 files, 8 MB each. JPG, JPEG, PNG, WEBP, GIF, TXT, LOG, PDF, JSON, MP4, WEBM
Simon Fletcher
Written and tested by

Simon FletcherVerified Gamepad Tester team member

Browser Compatibility Tester at Gamepad Tester

Simon audits browser compatibility. The Gamepad API is implemented unevenly: a DualSense exposes adaptive triggers and haptics in one browser and not another, button indexes shift between engines, and Safari and Chrome disagree on when a controller becomes visible to a page. He tests each release of the tools here across Chromium and WebKit builds and documents the differences instead of hiding them. On Gamepad Tester he handles the questions where a controller works in one browser but not another, and reviews the rumble and haptics answers.

Browser engine differencesChromium and WebKit testingGamepad API supporthaptics and adaptive triggers
  • 19 answers on Gamepad Tester
  • 24+ years experience
  • Tests each release of these tools across Chromium and WebKit browsers and documents the differences.
  • Reviewed by Calder Wright

The Team Behind These Answers

All 40 specialists

Each answer is written by the specialist who owns that part of the hardware, tested on a real controller, and checked by a second team member. How we verify answers

Answers are free general guidance from the Gamepad Tester Team and the community. Opening a controller or replacing a thumbstick module can void your warranty, so check the maker's support or warranty first. Battery and soldering work carries a real risk of damage or injury.

Free Controller Tests

Every test runs in your own browser with the Gamepad API. No sign up, no download, and your controller data never leaves your device.

All tools

Read Next On The Gamepad Tester Blog

All articles

Latest From The Community

The newest replies from players and the Gamepad Tester Team.

All guides