Skip to main content

Gamepad Tester

AnsweredVerified By Gamepad TesterVerified By Gamepad Tester

What Does FreeSync Range Mean, And What Happens Below It?

Asked by Jago P.0 views

My monitor's spec says FreeSync range 48 to 144 Hz. In your G-Sync and FreeSync test, when I drag the frame rate below about 48, I see stutter or tearing again. What does the range mean and what's LFC?

Brand
Not stated
Model
Monitor
Connection
DisplayPort
System
Windows 11
Browser
Chrome 153
Short Answer

The range is the span of refresh rates the monitor can match. Inside it, refresh follows frame rate smoothly. Below the minimum, the monitor cannot go slower, so stutter or tearing returns, unless low framerate compensation, LFC, doubles frames to stay in range. LFC typically works when the maximum is at least about twice the minimum.

Verified By Gamepad TesterVerified By Gamepad Tester
Calder Wright
Calder WrightVerified Gamepad Tester team memberGamepad Tester Team
Front-End Web Architect And Gamepad API Lead · 13+ years experience · Answered Oct 31, 2026

Variable refresh works within a range of refresh rates the monitor's panel can handle. For your monitor, 48 to 144 Hz.

Inside the range. If the game runs at 90 frames per second, the monitor refreshes at 90 Hz, in step with each frame. Motion stays smooth without tearing.

Above the range. At more than 144 frames per second, the monitor cannot refresh faster, so tearing or V-Sync behaviour returns. A frame cap a few frames below 144 keeps you inside the range.

Below the range. Under 48 frames per second, the panel cannot refresh slowly enough to match. Without help, stutter or tearing returns, which is what you saw in our test.

Low framerate compensation, LFC, is the help. When the frame rate drops below the minimum, the graphics driver shows each frame two or more times, so the refresh rate stays in range. At 30 frames per second, for example, it can refresh at 60 Hz, showing each frame twice. LFC generally works when the maximum refresh is at least about twice the minimum; 144 is three times 48, so your monitor should support it.

Browsers may not trigger LFC the way games do, so check in a game with a frame counter and the monitor's refresh display.

Step By Step Fix
  1. Check your monitor's variable refresh range in its specs.
  2. Cap frame rates a few frames below the maximum to stay in range.
  3. Expect LFC to handle frame rates below the minimum on wide-range monitors.
  4. Check in a game with the monitor's refresh counter to confirm LFC.
  5. Lower game settings if frame rates often fall well below the range.

Tested on: Applies to FreeSync and G-Sync Compatible monitors. Behaviour reflects how variable refresh range and LFC work; browser behaviour can differ from games.

Checked by Devon Miller on . How we verify answers

Did this fix your controller?
Was this answer helpful?
Share this guide

Community Replies 3

  • Accepted Solution
    Clemency HarrowCommunity Member

    My monitor's refresh counter showed 70 Hz when the game was at 35 FPS. LFC in action.

  • Jago PenhallowCommunity Member

    So below 48 the driver doubles frames in games. The browser test just doesn't trigger it the same way. Got it.

  • Rishabh TandonCommunity Member

    Narrow range monitors without LFC stutter badly at low frame rates, check before buying.

Add Your Reply

Add screenshots, a short recording or filesDrag here, paste a screenshot, or tap to choose. Up to 2 files, 8 MB each. JPG, JPEG, PNG, WEBP, GIF, TXT, LOG, PDF, JSON, MP4, WEBM
Calder Wright
Written and tested by

Calder WrightVerified Gamepad Tester team member

Front-End Web Architect And Gamepad API Lead at Gamepad Tester

Calder is a front-end web architect working with the HTML5 Gamepad API. His focus is the part most browser testers get wrong: reading a controller often enough, and timing it well enough, that the numbers on screen match what the hardware is actually sending. He writes the polling loops that capture analog trigger tension and stick travel without dropping samples, and renders them on 2D vector layouts that hold a steady 60+ FPS on ordinary laptops. On Gamepad Tester he maintains the main tester tool, the button test and the trigger pressure test, and reviews any answer that explains how a reading on this site should be interpreted.

Gamepad APIbrowser polling rateanalog trigger captureSVG and canvas renderingfront-end performance
  • 23 answers on Gamepad Tester
  • 13+ years experience
  • Maintains the browser-side test code on Gamepad Tester, including the polling loop used by the trigger pressure and stick drift tests.
  • Reviewed by Devon Miller

The Team Behind These Answers

All 40 specialists

Each answer is written by the specialist who owns that part of the hardware, tested on a real controller, and checked by a second team member. How we verify answers

Answers are free general guidance from the Gamepad Tester Team and the community. Opening a controller or replacing a thumbstick module can void your warranty, so check the maker's support or warranty first. Battery and soldering work carries a real risk of damage or injury.

Free Controller Tests

Every test runs in your own browser with the Gamepad API. No sign up, no download, and your controller data never leaves your device.

All tools

Read Next On The Gamepad Tester Blog

All articles

Latest From The Community

The newest replies from players and the Gamepad Tester Team.

All guides