Skip to main content

Gamepad Tester

AnsweredVerified By Gamepad TesterVerified By Gamepad Tester

How Long Should I Run The Stuck Pixel Fixer, And Is It Safe?

Asked by Lorcan M.0 views

I have a stuck red sub-pixel. Your stuck pixel fixer flashes colours over it. How long should I leave it running? Can it damage the screen? My little brother is sometimes in the room.

Brand
Not stated
Model
Monitor
Connection
DisplayPort
System
Windows 11
Browser
Chrome 146
Short Answer

Run it over the stuck pixel for 10 to 20 minutes, check, and repeat a few times if needed. It is safe for LCD and OLED screens. The rapid flashing can be a seizure risk for people with photosensitive epilepsy, so do not watch it and keep others from looking at it.

Verified By Gamepad TesterVerified By Gamepad Tester
Isabela Costa
Isabela CostaVerified Gamepad Tester team memberGamepad Tester Team
Front-End Performance Engineer · Answered Mar 15, 2026

Running the fixer is safe for the screen, but the flashing needs care around people.

For the screen: the fixer rapidly cycles colours in a small area to exercise the stuck sub-pixel, trying to get it switching again. That is just normal pixel operation sped up, and it does not harm LCD or OLED panels. A typical approach is 10 to 20 minutes over the spot, then check it on black in the dead pixel test. If it is unchanged, repeat a few sessions, perhaps on different days. Some stuck pixels respond in minutes, some after hours, and some never.

For people: rapid flashing colours can trigger seizures in people with photosensitive epilepsy, and can be unpleasant for anyone. Do not watch the fixer while it runs, cover or turn away from the screen, and keep your brother and anyone else from looking at it. Running it when the room is empty is the safest approach.

It works best on stuck sub-pixels, which show a colour on black. Dead pixels that stay dark on white usually cannot be revived this way. If nothing changes after several sessions and you are in a return window, that is the next option.

Step By Step Fix
  1. Move the fixer window over the stuck pixel.
  2. Run it for 10 to 20 minutes without watching it, in an empty room if possible.
  3. Check the pixel on black in the dead pixel test.
  4. Repeat a few sessions if unchanged.
  5. If it never changes, use the return window or warranty.

Tested on: Applies to LCD and OLED screens. Photosensitivity guidance reflects general safety advice about flashing content.

Checked by Xavier Cruz on . How we verify answers

Did this fix your controller?
Was this answer helpful?
Share this guide

Community Replies 3

  • Accepted Solution
    Daisy PenhallowCommunity Member

    Mine cleared after the second 20 minute run. Ran it while I was out of the room.

  • Lorcan MulvihillCommunity Member

    Three sessions over two days and the red sub-pixel is gone. Ran it with a towel over the screen edge while my brother was around.

  • Karthik IyengarCommunity Member

    Never worked on mine, it was a dead pixel not stuck. Returned it.

Add Your Reply

Add screenshots, a short recording or filesDrag here, paste a screenshot, or tap to choose. Up to 2 files, 8 MB each. JPG, JPEG, PNG, WEBP, GIF, TXT, LOG, PDF, JSON, MP4, WEBM
Isabela Costa
Written and tested by

Isabela CostaVerified Gamepad Tester team member

Front-End Performance Engineer at Gamepad Tester

Isabela works on graphics performance. A test that polls a controller continuously and repaints an SVG on every frame can saturate a budget phone's CPU, and once the frame rate drops the readings stop being trustworthy. Her work is keeping the overlays and animations cheap: minimal repaints, fewer live nodes, and a render path that degrades gracefully instead of stuttering. On Gamepad Tester she is responsible for the performance of the tools on mobile and low-end devices.

Rendering performanceSVG optimisationlow-end device supportCPU and frame budget
  • 15 answers on Gamepad Tester
  • Owns the render and CPU budget for the test tools on mobile and low-end hardware.
  • Reviewed by Xavier Cruz

The Team Behind These Answers

All 40 specialists

Each answer is written by the specialist who owns that part of the hardware, tested on a real controller, and checked by a second team member. How we verify answers

Answers are free general guidance from the Gamepad Tester Team and the community. Opening a controller or replacing a thumbstick module can void your warranty, so check the maker's support or warranty first. Battery and soldering work carries a real risk of damage or injury.

Free Controller Tests

Every test runs in your own browser with the Gamepad API. No sign up, no download, and your controller data never leaves your device.

All tools

Read Next On The Gamepad Tester Blog

All articles

Latest From The Community

The newest replies from players and the Gamepad Tester Team.

All guides