Skip to main content

Gamepad Tester

AnsweredVerified By Gamepad TesterVerified By Gamepad Tester

My Laptop Screen Has Light Leaking Along The Bottom Near The Hinge

Asked by Esme G.0 views

On a black screen in your backlight bleed test, my new laptop has a bright glowing strip along the bottom edge near the hinge. In dark films I notice it. Is that normal for laptops?

Brand
Not stated
Model
Laptop
Connection
Built-in
System
Windows 11
Browser
Edge 149
Short Answer

Some bleed along the bottom edge is common on laptops, because thin lids and the hinge put pressure on the panel edge. Check it at normal brightness from your normal position; if it is distracting in everyday dark content, use the return window, since replacement units vary.

Verified By Gamepad TesterVerified By Gamepad Tester
Venom’s Tech (Abhishek)
Venom’s Tech (Abhishek)Verified Gamepad Tester team memberGamepad Tester Team
Peripheral Reviewer And Tech Journalist · 8+ years experience · Answered Jun 10, 2026

It is a common place for laptop bleed. Laptop lids are thin, and the bottom edge of the panel sits close to the hinge and the bezel clips, where pressure on the panel is highest. That often lets a little backlight leak through along the bottom, especially on IPS screens.

Judge it fairly. Run the backlight bleed test at the brightness you normally use, in a dim but not completely dark room, from your normal viewing position. Very high brightness in total darkness, and phone photos with long exposure, make bleed look far worse than it is.

Also move your head. If the glow changes with your viewing angle, part of it is IPS glow rather than bleed, which every IPS panel has.

If you only see it on the test screen, it is within the normal range. If it is distracting in dark films and games at normal settings, that is a reasonable reason to return or exchange the laptop within the window. Replacement units vary, so another one may be better.

Avoid pressing on the bezel to fix it; that can make it worse or damage the panel.

Step By Step Fix
  1. Run the backlight bleed test at your normal brightness in a dim room.
  2. View from your normal position and move your head to separate glow from bleed.
  3. Watch some dark content to judge real-world impact.
  4. If distracting, exchange the laptop within the return window.
  5. Do not press on the bezel to try to fix it.

Tested on: Applies to laptop LCD screens. Test conditions follow common display review practice.

Checked by Isabela Costa on . How we verify answers

Did this fix your controller?
Was this answer helpful?
Share this guide

Community Replies 3

  • Accepted Solution
    Vaughan ListerCommunity Member

    Every laptop I've owned has some bottom edge bleed. Only one was bad enough to return.

  • Esme GartsideCommunity Member

    At my normal brightness it's very faint. Only obvious in the test. Keeping it.

  • Nisha KapoorCommunity Member

    My exchange unit had much less bleed, worth trying if it bothers you.

Add Your Reply

Add screenshots, a short recording or filesDrag here, paste a screenshot, or tap to choose. Up to 2 files, 8 MB each. JPG, JPEG, PNG, WEBP, GIF, TXT, LOG, PDF, JSON, MP4, WEBM
Venom’s Tech (Abhishek)
Written and tested by

Venom’s Tech (Abhishek)Verified Gamepad Tester team member

Peripheral Reviewer And Tech Journalist at Gamepad Tester

Abhishek, known to his audience as Venom's Tech, is a tech journalist and peripheral reviewer who works at the budget end of the market, where quality control varies the most. He specialises in granular teardowns and comparisons of mobile clip-on controllers, cheap third-party pads and the stick modules inside them, which is where drift tends to appear first and earliest. On Gamepad Tester he covers the reviews and buying topic for mobile and budget hardware, and checks answers about third-party pads that behave differently from a first-party controller.

Mobile controllersbudget and third-party padsstick drift in clone hardwareperipheral teardowns
  • 15 answers on Gamepad Tester
  • 8+ years experience
  • Tests and reviews mobile and budget controllers hands-on, including teardowns of their stick modules.
  • Reviewed by Isabela Costa

The Team Behind These Answers

All 40 specialists

Each answer is written by the specialist who owns that part of the hardware, tested on a real controller, and checked by a second team member. How we verify answers

Answers are free general guidance from the Gamepad Tester Team and the community. Opening a controller or replacing a thumbstick module can void your warranty, so check the maker's support or warranty first. Battery and soldering work carries a real risk of damage or injury.

Free Controller Tests

Every test runs in your own browser with the Gamepad API. No sign up, no download, and your controller data never leaves your device.

All tools

Read Next On The Gamepad Tester Blog

All articles

Latest From The Community

The newest replies from players and the Gamepad Tester Team.

All guides