Skip to main content

Gamepad Tester

AnsweredVerified By Gamepad TesterVerified By Gamepad Tester

How Do I Use My FreeSync Monitor With An NVIDIA Graphics Card?

Asked by Delilah M.0 views

I have a FreeSync monitor and just upgraded to an NVIDIA graphics card. Can I still use variable refresh? Your G-Sync and FreeSync test shows tearing when I move the frame rate slider.

Brand
Not stated
Model
Monitor
Connection
DisplayPort
System
Windows 11
Browser
Edge 153
Short Answer

Yes, most FreeSync monitors work with NVIDIA cards as G-Sync Compatible. Turn on FreeSync in the monitor's menu, connect with DisplayPort where possible, then in the NVIDIA control panel enable G-Sync for the monitor and apply.

Verified By Gamepad TesterVerified By Gamepad Tester
Lucas Rocha
Lucas RochaVerified Gamepad Tester team memberGamepad Tester Team
Linux And Input Subsystem Engineer · 12+ years experience · Answered Oct 11, 2026

Most FreeSync monitors work with NVIDIA cards using the VESA Adaptive-Sync standard that both brands support. NVIDIA calls this G-Sync Compatible.

Setup steps:

Monitor first. In the monitor's own menu, turn on FreeSync or adaptive sync. This is easy to miss, and nothing works without it.

Connection. Use DisplayPort if you can. Variable refresh over HDMI works on some newer setups, but DisplayPort is the most reliable route with NVIDIA.

NVIDIA control panel. Open it, go to the display section for setting up G-Sync, tick the option to enable G-Sync or G-Sync Compatible, choose whether it applies to full screen only or windowed and full screen, select your monitor, and apply. If the monitor is not officially certified, you may need to tick the option to enable settings for the selected display model.

Then test. In our test, move the frame rate slider below your refresh rate. Motion should stay smooth without a tearing line. In games, turn on the G-Sync indicator or the monitor's refresh counter to confirm.

If you see flicker at low frame rates or in loading screens, that is a common VRR side effect on some monitors; a frame cap helps.

Step By Step Fix
  1. Turn on FreeSync or adaptive sync in the monitor's menu.
  2. Connect with DisplayPort where possible.
  3. Enable G-Sync Compatible for the monitor in the NVIDIA control panel and apply.
  4. Move the frame rate slider in the test and check for smooth, tear-free motion.
  5. Set a frame cap a few frames below the refresh rate if you see flicker.

Tested on: Applies to FreeSync monitors with NVIDIA graphics on Windows 11. Settings per the NVIDIA control panel; options vary by driver version.

Checked by Devon Miller on . How we verify answers

Did this fix your controller?
Was this answer helpful?
Share this guide

Community Replies 3

  • Accepted Solution
    Ignatia MorrowCommunity Member

    Works great on my FreeSync monitor with NVIDIA. Had to tick the uncertified display option.

  • Delilah MarchbanksCommunity Member

    FreeSync was off in the monitor menu! Turned it on, enabled G-Sync in NVIDIA, no more tearing in the test.

  • Varun ChoudharyCommunity Member

    Frame cap at 158 on my 165 Hz screen stopped the loading screen flicker.

Add Your Reply

Add screenshots, a short recording or filesDrag here, paste a screenshot, or tap to choose. Up to 2 files, 8 MB each. JPG, JPEG, PNG, WEBP, GIF, TXT, LOG, PDF, JSON, MP4, WEBM
Lucas Rocha
Written and tested by

Lucas RochaVerified Gamepad Tester team member

Linux And Input Subsystem Engineer at Gamepad Tester

Lucas works on the Linux input subsystem. He follows how evdev registers a controller, how Steam Input sits on top of it and where the two disagree with the browser's view of the same device, which is the usual reason a pad behaves differently on a Steam Deck or a Linux desktop than on Windows. His testing targets parity: the same controller should produce the same reading on every operating system, and where it does not, the difference should be documented. On Gamepad Tester he handles the Linux and Steam Deck questions.

Linux evdev inputSteam InputSteam Deck controller handlingcross-platform input parity
  • 21 answers on Gamepad Tester
  • 12+ years experience
  • Compares controller readings across Linux, Steam Deck and Windows to confirm cross-platform parity.
  • Reviewed by Devon Miller

The Team Behind These Answers

All 40 specialists

Each answer is written by the specialist who owns that part of the hardware, tested on a real controller, and checked by a second team member. How we verify answers

Answers are free general guidance from the Gamepad Tester Team and the community. Opening a controller or replacing a thumbstick module can void your warranty, so check the maker's support or warranty first. Battery and soldering work carries a real risk of damage or injury.

Free Controller Tests

Every test runs in your own browser with the Gamepad API. No sign up, no download, and your controller data never leaves your device.

All tools

Read Next On The Gamepad Tester Blog

All articles

Latest From The Community

The newest replies from players and the Gamepad Tester Team.

All guides