Skip to main content

Gamepad Tester

AnsweredVerified By Gamepad TesterVerified By Gamepad Tester

Can A TV Channel Logo Burn Into My OLED TV?

Asked by Alistair P.0 views

My dad watches news channels for hours every day on our OLED TV. I'm worried about the channel logo and ticker burning in. Our burn-in test on grey shows nothing yet. How do we prevent it?

Brand
Not stated
Model
OLED TV
Connection
HDMI
System
Smart TV
Browser
Chrome 152
Short Answer

Yes, static logos and tickers watched for many hours a day are a classic OLED burn-in risk. Modern OLED TVs have protections, such as logo luminance reduction and pixel refresh, so leave those on, avoid very high brightness for news, vary content, and let the TV complete its refresh cycles in standby.

Verified By Gamepad TesterVerified By Gamepad Tester
Simon Fletcher
Simon FletcherVerified Gamepad Tester team memberGamepad Tester Team
Browser Compatibility Tester · 24+ years experience · Answered Sep 11, 2026

Your worry is reasonable. Hours of the same channel logo and news ticker every day is the classic OLED burn-in scenario. The good news is that modern OLED TVs include several protections, and a few habits help a lot.

Leave the protections on. Most OLED TVs have a logo luminance or static area dimming feature that detects static logos and lowers their brightness. Keep it enabled. They also run pixel refresh or compensation routines, usually automatically in standby after use, so let the TV go into standby normally rather than switching it off at the wall.

Adjust settings for news. Use a standard or eco picture mode with moderate brightness rather than vivid mode for long news sessions. Lower OLED light or brightness reduces wear.

Vary content. Mixing in other channels, films and full-screen content spreads wear more evenly.

Check now and then. Our burn-in test's grey screen is a good monthly check. If you see a faint logo, run the TV's manual pixel refresh if it has one, which can help with early retention.

Also check the warranty: some TV makers include burn-in in specific warranty terms.

Step By Step Fix
  1. Keep logo luminance or static area dimming enabled.
  2. Let the TV enter standby normally so its pixel refresh can run.
  3. Use moderate brightness and a standard picture mode for long news sessions.
  4. Vary channels and content through the day.
  5. Check the grey burn-in test monthly and review warranty terms.

Tested on: Applies to OLED TVs from major manufacturers. Protection features vary by model; check the TV's manual.

Checked by Isabela Costa on . How we verify answers

Did this fix your controller?
Was this answer helpful?
Share this guide

Community Replies 3

  • Accepted Solution
    Gwendolyn ReesCommunity Member

    Our OLED has survived years of news with logo dimming on and moderate brightness.

  • Alistair PemberleyCommunity Member

    Logo luminance was off! Turned it on, switched to standard mode, and Dad's happy. Will check monthly.

  • Hemant JoshiCommunity Member

    Never unplug at the wall, let it do its refresh in standby.

Add Your Reply

Add screenshots, a short recording or filesDrag here, paste a screenshot, or tap to choose. Up to 2 files, 8 MB each. JPG, JPEG, PNG, WEBP, GIF, TXT, LOG, PDF, JSON, MP4, WEBM
Simon Fletcher
Written and tested by

Simon FletcherVerified Gamepad Tester team member

Browser Compatibility Tester at Gamepad Tester

Simon audits browser compatibility. The Gamepad API is implemented unevenly: a DualSense exposes adaptive triggers and haptics in one browser and not another, button indexes shift between engines, and Safari and Chrome disagree on when a controller becomes visible to a page. He tests each release of the tools here across Chromium and WebKit builds and documents the differences instead of hiding them. On Gamepad Tester he handles the questions where a controller works in one browser but not another, and reviews the rumble and haptics answers.

Browser engine differencesChromium and WebKit testingGamepad API supporthaptics and adaptive triggers
  • 19 answers on Gamepad Tester
  • 24+ years experience
  • Tests each release of these tools across Chromium and WebKit browsers and documents the differences.
  • Reviewed by Isabela Costa

The Team Behind These Answers

All 40 specialists

Each answer is written by the specialist who owns that part of the hardware, tested on a real controller, and checked by a second team member. How we verify answers

Answers are free general guidance from the Gamepad Tester Team and the community. Opening a controller or replacing a thumbstick module can void your warranty, so check the maker's support or warranty first. Battery and soldering work carries a real risk of damage or injury.

Free Controller Tests

Every test runs in your own browser with the Gamepad API. No sign up, no download, and your controller data never leaves your device.

All tools

Read Next On The Gamepad Tester Blog

All articles

Latest From The Community

The newest replies from players and the Gamepad Tester Team.

All guides