Skip to main content

Gamepad Tester

AnsweredVerified By Gamepad TesterVerified By Gamepad Tester

Can I Fix A Stuck Pixel By Pressing On The Screen?

Asked by Harriet L.0 views

Videos online say you can fix a stuck pixel by pressing on it with a cloth while the screen is on. The stuck pixel fixer hasn't worked yet on my green pixel. Is the pressure method safe?

Brand
Not stated
Model
Monitor
Connection
DisplayPort
System
Windows 11
Browser
Chrome 147
Short Answer

We do not recommend it. Pressing on an LCD can create new dead or stuck pixels, cause pressure marks, damage the panel layers and may affect your warranty. Keep using the stuck pixel fixer for a few more sessions, then use the return window or warranty.

Verified By Gamepad TesterVerified By Gamepad Tester
Isabela Costa
Isabela CostaVerified Gamepad Tester team memberGamepad Tester Team
Front-End Performance Engineer · Answered Apr 16, 2026

It is tempting, but the risk is real and the reward uncertain.

An LCD panel is a stack of thin glass and film layers with liquid crystal in between. Pressing on it, even through a cloth, pushes those layers together. Sometimes it nudges a stuck sub-pixel back into working order, which is why the videos exist. But the same pressure can damage neighbouring pixels, leave permanent pressure marks or cloudy patches, crack internal layers on thin panels, or disturb the backlight diffuser. On a laptop the panel is even thinner and more fragile.

There is also the warranty. Physical damage from pressing is usually not covered, so a monitor that could have been exchanged for a single stuck pixel may become a damaged one.

The safer path: run the stuck pixel fixer over the pixel for several sessions, 10 to 20 minutes each, spread over a few days, without watching the flashing. Some pixels respond only after repeated sessions.

If it still does not change and you are in the return window, return or exchange it. Otherwise check the manufacturer's pixel policy for your model, since many treat bright or stuck pixels more strictly than dark ones.

Step By Step Fix
  1. Avoid pressing on the screen.
  2. Run the stuck pixel fixer over the pixel for 10 to 20 minutes per session.
  3. Repeat over several days without watching the flashing.
  4. Check the pixel on black in the dead pixel test after each session.
  5. Use the return window or the manufacturer's pixel policy if it does not change.

Tested on: Applies to LCD monitors and laptop screens. Defect handling per published pixel policies such as Lenovo's.

Checked by Thiago Alves on . How we verify answers

Did this fix your controller?
Was this answer helpful?
Share this guide

Community Replies 3

  • Accepted Solution
    Montague ElleryCommunity Member

    Tried pressing once, made a faint pressure mark that's still there. Don't do it.

  • Harriet LockyerCommunity Member

    Skipping the pressure method. Fixer cleared it on the fourth session, so patience paid off.

  • Neelam JoshiCommunity Member

    Laptop screens especially, they're so thin.

Add Your Reply

Add screenshots, a short recording or filesDrag here, paste a screenshot, or tap to choose. Up to 2 files, 8 MB each. JPG, JPEG, PNG, WEBP, GIF, TXT, LOG, PDF, JSON, MP4, WEBM
Isabela Costa
Written and tested by

Isabela CostaVerified Gamepad Tester team member

Front-End Performance Engineer at Gamepad Tester

Isabela works on graphics performance. A test that polls a controller continuously and repaints an SVG on every frame can saturate a budget phone's CPU, and once the frame rate drops the readings stop being trustworthy. Her work is keeping the overlays and animations cheap: minimal repaints, fewer live nodes, and a render path that degrades gracefully instead of stuttering. On Gamepad Tester she is responsible for the performance of the tools on mobile and low-end devices.

Rendering performanceSVG optimisationlow-end device supportCPU and frame budget
  • 15 answers on Gamepad Tester
  • Owns the render and CPU budget for the test tools on mobile and low-end hardware.
  • Reviewed by Thiago Alves

The Team Behind These Answers

All 40 specialists

Each answer is written by the specialist who owns that part of the hardware, tested on a real controller, and checked by a second team member. How we verify answers

Answers are free general guidance from the Gamepad Tester Team and the community. Opening a controller or replacing a thumbstick module can void your warranty, so check the maker's support or warranty first. Battery and soldering work carries a real risk of damage or injury.

Free Controller Tests

Every test runs in your own browser with the Gamepad API. No sign up, no download, and your controller data never leaves your device.

All tools

Read Next On The Gamepad Tester Blog

All articles

Latest From The Community

The newest replies from players and the Gamepad Tester Team.

All guides