Skip to main content

Gamepad Tester

AnsweredVerified By Gamepad TesterVerified By Gamepad Tester

Does Backlight Bleed Get Better Over Time?

Asked by Alaric W.0 views

My new monitor has some bleed in one corner. Forums say it settles and improves after a few weeks of use. Should I wait, or return it now while I can? Your backlight bleed test shows it clearly.

Brand
Not stated
Model
Monitor
Connection
DisplayPort
System
Windows 11
Browser
Edge 150
Short Answer

Bleed can change slightly as a panel warms up and settles, and some people report small improvements, but there is no guarantee and it can also get worse. Do not wait past the return window hoping it improves. Judge it in normal use now and decide.

Verified By Gamepad TesterVerified By Gamepad Tester
Isabela Costa
Isabela CostaVerified Gamepad Tester team memberGamepad Tester Team
Front-End Performance Engineer · Answered Jul 16, 2026

There is some truth in the forum advice, but it is not something to bet on.

Bleed comes from uneven pressure on the panel in its frame. As a new monitor goes through heating and cooling cycles, the parts can settle slightly, and some people do see bleed reduce a little in the first weeks. Bleed can also look different warm versus cold, so a monitor checked just after unboxing may look worse than after an hour of use.

But it can just as easily stay the same, or get worse, and the return window will not wait.

A sensible approach. Use the monitor for an hour or two so it is warm, then check our backlight bleed test at your normal brightness, from your seat, in a dim room. Then use it normally for a few days within the window, especially in the dark content you care about.

If the bleed is only visible on the test screen, it is within normal range and you can keep it without worry. If it bothers you in films or games, decide before the window closes. Replacement units vary, so an exchange is often worth it.

Step By Step Fix
  1. Use the monitor for an hour or two so it is warm before judging.
  2. Check the backlight bleed test at normal brightness from your seat in a dim room.
  3. Use it for a few days with the dark content you care about.
  4. Decide before the return window closes; do not count on improvement.
  5. Exchange it if the bleed bothers you in normal use.

Tested on: Applies to LCD monitors. Behaviour reflects how panel pressure and heat affect edge light leakage.

Checked by Venom’s Tech (Abhishek) on . How we verify answers

Did this fix your controller?
Was this answer helpful?
Share this guide

Community Replies 3

  • Accepted Solution
    Rosalind GreyCommunity Member

    Mine improved slightly after a month, but I wouldn't have waited past the return window for it.

  • Alaric WentworthCommunity Member

    Checked after warming up, it's mild and only on the test. Keeping it.

  • Aakash PillaiCommunity Member

    Mine got worse, not better. Glad I exchanged early.

Add Your Reply

Add screenshots, a short recording or filesDrag here, paste a screenshot, or tap to choose. Up to 2 files, 8 MB each. JPG, JPEG, PNG, WEBP, GIF, TXT, LOG, PDF, JSON, MP4, WEBM
Isabela Costa
Written and tested by

Isabela CostaVerified Gamepad Tester team member

Front-End Performance Engineer at Gamepad Tester

Isabela works on graphics performance. A test that polls a controller continuously and repaints an SVG on every frame can saturate a budget phone's CPU, and once the frame rate drops the readings stop being trustworthy. Her work is keeping the overlays and animations cheap: minimal repaints, fewer live nodes, and a render path that degrades gracefully instead of stuttering. On Gamepad Tester she is responsible for the performance of the tools on mobile and low-end devices.

Rendering performanceSVG optimisationlow-end device supportCPU and frame budget
  • 15 answers on Gamepad Tester
  • Owns the render and CPU budget for the test tools on mobile and low-end hardware.
  • Reviewed by Venom’s Tech (Abhishek)

The Team Behind These Answers

All 40 specialists

Each answer is written by the specialist who owns that part of the hardware, tested on a real controller, and checked by a second team member. How we verify answers

Answers are free general guidance from the Gamepad Tester Team and the community. Opening a controller or replacing a thumbstick module can void your warranty, so check the maker's support or warranty first. Battery and soldering work carries a real risk of damage or injury.

Free Controller Tests

Every test runs in your own browser with the Gamepad API. No sign up, no download, and your controller data never leaves your device.

All tools

Read Next On The Gamepad Tester Blog

All articles

Latest From The Community

The newest replies from players and the Gamepad Tester Team.

All guides