Skip to main content

Gamepad Tester

AnsweredVerified By Gamepad TesterVerified By Gamepad Tester

Does It Matter Where The Dead Pixel Is For A Warranty Claim?

Asked by Gideon A.0 views

Found one dead pixel on my new monitor using your dead pixel test. It's near the middle of the screen. The manufacturer's policy talks about pixel counts and zones. Does a dead pixel in the centre count differently from one at the edge?

Brand
Not stated
Model
Monitor
Connection
DisplayPort
System
Windows 11
Browser
Chrome 144
Short Answer

It can. Manufacturer pixel policies set limits by defect type, and some treat the central area of the screen more strictly than the edges. Bright pixels are often treated more strictly than dark ones. Read your model's policy, and use the retailer's return window if the policy does not cover a single pixel.

Verified By Gamepad TesterVerified By Gamepad Tester
Sneha Reddy
Sneha ReddyVerified Gamepad Tester team memberGamepad Tester Team
Hardware QA Lead · 7+ years experience · Answered Jan 13, 2026

Location can matter, and so can the type of defect. Pixel policies from manufacturers are usually based on the ISO 9241-307 classes, with their own rules on top. Common patterns are: separate limits for bright pixels, which stay lit, and dark pixels, which stay off; separate limits for full pixels and single sub-pixels; and sometimes a stricter central zone, because a defect in the middle is more distracting than one in a corner. Some premium ranges promise replacement for even one bright pixel.

So the answer is in your model's specific policy. Look up the pixel policy on the manufacturer's support site and check four things: whether your defect is bright or dark, whether it is a whole pixel or a sub-pixel, whether the centre is treated differently, and how many defects are allowed.

If the policy does not cover a single dark pixel, the retailer's return window is often the simpler route, since retailer returns do not depend on pixel counts.

Document it either way: show the colour that makes it most visible in our test, photograph it with something for scale, and note its position.

Step By Step Fix
  1. Use the dead pixel test to find the colour where the pixel is most visible.
  2. Note whether it is bright or dark, and its position on the screen.
  3. Photograph it with a coin or ruler for scale.
  4. Read the manufacturer's pixel policy for your model.
  5. If the policy does not cover it, check the retailer's return window.

Tested on: Applies to LCD and OLED monitors. Policy structure per published ISO 9241-307 based policies such as Lenovo's.

Checked by Isabela Costa on . How we verify answers

Did this fix your controller?
Was this answer helpful?
Share this guide

Community Replies 3

  • Accepted Solution
    Cecily HargraveCommunity Member

    My manufacturer counted bright pixels in the centre zone strictly. One was enough for a swap.

  • Gideon AshcombeCommunity Member

    Policy needs three dark pixels, so the manufacturer won't help. The retailer swapped it within the return window.

  • Prakash NambiarCommunity Member

    Always read the policy for your exact model, they differ even within one brand.

Add Your Reply

Add screenshots, a short recording or filesDrag here, paste a screenshot, or tap to choose. Up to 2 files, 8 MB each. JPG, JPEG, PNG, WEBP, GIF, TXT, LOG, PDF, JSON, MP4, WEBM
Sneha Reddy
Written and tested by

Sneha ReddyVerified Gamepad Tester team member

Hardware QA Lead at Gamepad Tester

Sneha leads manual hardware QA. Her lab takes controllers that arrive with no published specifications, mostly budget and mobile pads, and puts each one through the same fixed set of checks: every button and axis registers, deadzones are inside tolerance, rumble motors both run, the battery holds its claimed runtime, and the pad still passes after a charge cycle or two. Pads that fail are documented rather than quietly dropped. On Gamepad Tester she reviews the answers about cheap controllers behaving unpredictably and about battery and charging faults.

Manual hardware QAbenchmark criteriabudget controller testingbattery runtimerumble verification
  • 35 answers on Gamepad Tester
  • 7+ years experience
  • Runs the manual QA checks behind this site's answers on budget controller faults and battery behaviour.
  • Reviewed by Isabela Costa

The Team Behind These Answers

All 40 specialists

Each answer is written by the specialist who owns that part of the hardware, tested on a real controller, and checked by a second team member. How we verify answers

Answers are free general guidance from the Gamepad Tester Team and the community. Opening a controller or replacing a thumbstick module can void your warranty, so check the maker's support or warranty first. Battery and soldering work carries a real risk of damage or injury.

Free Controller Tests

Every test runs in your own browser with the Gamepad API. No sign up, no download, and your controller data never leaves your device.

All tools

Read Next On The Gamepad Tester Blog

All articles

Latest From The Community

The newest replies from players and the Gamepad Tester Team.

All guides