Skip to main content

Gamepad Tester

AnsweredVerified By Gamepad TesterVerified By Gamepad Tester

How Do I Photograph Backlight Bleed Properly For A Return?

Asked by Isolde F.0 views

I want to return my monitor for backlight bleed, but my phone photos either look perfect or ridiculously bright compared with what I see. How do I take a fair photo with your backlight bleed test?

Brand
Not stated
Model
Monitor
Connection
DisplayPort
System
Windows 11
Browser
Chrome 149
Short Answer

Phone cameras auto-brighten dark scenes, which exaggerates bleed. Use your normal brightness, a dim room with a little light, and lock or lower the camera's exposure until the photo matches what your eyes see. Shoot straight on from your seating position.

Verified By Gamepad TesterVerified By Gamepad Tester
Venom’s Tech (Abhishek)
Venom’s Tech (Abhishek)Verified Gamepad Tester team memberGamepad Tester Team
Peripheral Reviewer And Tech Journalist · 8+ years experience · Answered Jun 11, 2026

Phones make this hard because they try to make dark scenes visible. On a black screen, auto exposure brightens everything, and modest bleed looks like a floodlight. Night modes make it worse. A fair photo matches what you see.

Set the scene. Use the monitor's normal brightness, not maximum. Dim the room but leave a little light on, which also stops the camera from going to extreme exposure. Open our backlight bleed test full screen.

Set the camera. Turn off night mode. Tap the screen to focus, then lower exposure with the slider or use a pro or manual mode with a shorter exposure. Adjust until the photo looks like what your eyes see from your seat, no brighter.

Shoot straight on, from where you normally sit. Shooting from an angle mixes in IPS glow.

Take two photos: one matching your eye, and one of the same scene with something familiar visible, such as the monitor's edge or a lamp, so the support team can judge the exposure.

In your return message, describe it plainly, for example visible bleed along the top edge in dark scenes at normal brightness. Clear, honest photos get faster results than exaggerated ones.

Step By Step Fix
  1. Set normal brightness and open the backlight bleed test full screen in a dim room.
  2. Turn off night mode and lower the camera exposure until the photo matches your eyes.
  3. Shoot straight on from your seating position.
  4. Take a second photo with surroundings visible for reference.
  5. Describe the bleed plainly in the return request.

Tested on: Applies to LCD monitors photographed with phone cameras. Test conditions follow common display review practice.

Checked by Sneha Reddy on . How we verify answers

Did this fix your controller?
Was this answer helpful?
Share this guide

Community Replies 3

  • Accepted Solution
    Archibald PenroseCommunity Member

    Lowering exposure until it matched my eyes made the photo honest and the return easy.

  • Isolde FeatherstoneCommunity Member

    Night mode was making it look terrible. Manual exposure photo shows exactly what I see. Return accepted.

  • Ritu BhargavaCommunity Member

    Including the lamp in the second photo helped support understand the lighting.

Add Your Reply

Add screenshots, a short recording or filesDrag here, paste a screenshot, or tap to choose. Up to 2 files, 8 MB each. JPG, JPEG, PNG, WEBP, GIF, TXT, LOG, PDF, JSON, MP4, WEBM
Venom’s Tech (Abhishek)
Written and tested by

Venom’s Tech (Abhishek)Verified Gamepad Tester team member

Peripheral Reviewer And Tech Journalist at Gamepad Tester

Abhishek, known to his audience as Venom's Tech, is a tech journalist and peripheral reviewer who works at the budget end of the market, where quality control varies the most. He specialises in granular teardowns and comparisons of mobile clip-on controllers, cheap third-party pads and the stick modules inside them, which is where drift tends to appear first and earliest. On Gamepad Tester he covers the reviews and buying topic for mobile and budget hardware, and checks answers about third-party pads that behave differently from a first-party controller.

Mobile controllersbudget and third-party padsstick drift in clone hardwareperipheral teardowns
  • 15 answers on Gamepad Tester
  • 8+ years experience
  • Tests and reviews mobile and budget controllers hands-on, including teardowns of their stick modules.
  • Reviewed by Sneha Reddy

The Team Behind These Answers

All 40 specialists

Each answer is written by the specialist who owns that part of the hardware, tested on a real controller, and checked by a second team member. How we verify answers

Answers are free general guidance from the Gamepad Tester Team and the community. Opening a controller or replacing a thumbstick module can void your warranty, so check the maker's support or warranty first. Battery and soldering work carries a real risk of damage or injury.

Free Controller Tests

Every test runs in your own browser with the Gamepad API. No sign up, no download, and your controller data never leaves your device.

All tools

Read Next On The Gamepad Tester Blog

All articles

Latest From The Community

The newest replies from players and the Gamepad Tester Team.

All guides