Skip to main content

Gamepad Tester

AnsweredVerified By Gamepad TesterVerified By Gamepad Tester

I Have A Bright White Dot That Never Turns Off, Can The Fixer Help?

Asked by Clement A.0 views

On black, my monitor has a bright white dot. On other colours it's still white. The stuck pixel fixer didn't change it after a couple of runs. Is this a stuck pixel or something else?

Brand
Not stated
Model
Monitor
Connection
HDMI
System
Windows 11
Browser
Edge 148
Short Answer

A dot that is white on every colour is a fully lit pixel, often called a hot or bright pixel: all three sub-pixels stuck on. Fixers succeed less often with these than with a single stuck colour. The good news is that bright pixels are usually treated strictly in manufacturer pixel policies.

Verified By Gamepad TesterVerified By Gamepad Tester
Sneha Reddy
Sneha ReddyVerified Gamepad Tester team memberGamepad Tester Team
Hardware QA Lead · 7+ years experience · Answered May 14, 2026

What you describe is a bright pixel, sometimes called a hot pixel. Each pixel has red, green and blue sub-pixels. A stuck pixel usually has one sub-pixel stuck on, so it shows as a coloured dot. A white dot that stays white on every colour means all three sub-pixels are stuck on.

The fixer works by rapidly switching sub-pixels to free them. It can help with bright pixels, but they respond less often than a single stuck colour, because the fault is more likely in the pixel's driving transistor than in the liquid crystal. A few more sessions are worth trying.

The silver lining is policy. Manufacturers' pixel policies usually allow fewer bright defects than dark ones, because a bright dot is far more noticeable. Some premium ranges replace for a single bright pixel. So check your model's policy: your case may well qualify, especially near the centre of the screen.

If you are still inside the retailer's return window, that remains the simplest route.

Document it on our black screen, with a photo showing the dot clearly, before contacting support.

Step By Step Fix
  1. Confirm the dot is white on black and on every other colour in the dead pixel test.
  2. Try a few more stuck pixel fixer sessions.
  3. Read your model's pixel policy for bright pixel limits.
  4. Photograph the dot on the black screen.
  5. Contact the retailer or manufacturer with the photo.

Tested on: Applies to LCD monitors. Defect definitions per published pixel policies such as Lenovo's.

Checked by Isabela Costa on . How we verify answers

Did this fix your controller?
Was this answer helpful?
Share this guide

Community Replies 3

  • Accepted Solution
    Juniper HarcourtCommunity Member

    Bright pixel policy on my monitor was zero tolerance. Replacement sent within a week.

  • Clement ArundelCommunity Member

    Policy allows zero bright pixels in the centre zone. Claim submitted with a photo on black.

  • Pankaj SinhaCommunity Member

    Fixer never worked on my white dot either, warranty did.

Add Your Reply

Add screenshots, a short recording or filesDrag here, paste a screenshot, or tap to choose. Up to 2 files, 8 MB each. JPG, JPEG, PNG, WEBP, GIF, TXT, LOG, PDF, JSON, MP4, WEBM
Sneha Reddy
Written and tested by

Sneha ReddyVerified Gamepad Tester team member

Hardware QA Lead at Gamepad Tester

Sneha leads manual hardware QA. Her lab takes controllers that arrive with no published specifications, mostly budget and mobile pads, and puts each one through the same fixed set of checks: every button and axis registers, deadzones are inside tolerance, rumble motors both run, the battery holds its claimed runtime, and the pad still passes after a charge cycle or two. Pads that fail are documented rather than quietly dropped. On Gamepad Tester she reviews the answers about cheap controllers behaving unpredictably and about battery and charging faults.

Manual hardware QAbenchmark criteriabudget controller testingbattery runtimerumble verification
  • 35 answers on Gamepad Tester
  • 7+ years experience
  • Runs the manual QA checks behind this site's answers on budget controller faults and battery behaviour.
  • Reviewed by Isabela Costa

The Team Behind These Answers

All 40 specialists

Each answer is written by the specialist who owns that part of the hardware, tested on a real controller, and checked by a second team member. How we verify answers

Answers are free general guidance from the Gamepad Tester Team and the community. Opening a controller or replacing a thumbstick module can void your warranty, so check the maker's support or warranty first. Battery and soldering work carries a real risk of damage or injury.

Free Controller Tests

Every test runs in your own browser with the Gamepad API. No sign up, no download, and your controller data never leaves your device.

All tools

Read Next On The Gamepad Tester Blog

All articles

Latest From The Community

The newest replies from players and the Gamepad Tester Team.

All guides