Skip to main content

Gamepad Tester

AnsweredVerified By Gamepad TesterVerified By Gamepad Tester

I See A Faint Ghost Of A Window On My LCD Monitor, Is That Burn-In?

Asked by Montgomery P.0 views

I left a spreadsheet open all day and now I see a faint outline of it on my IPS monitor, especially on grey. Your burn-in test shows it on the grey screen. I thought only OLEDs got burn-in?

Brand
Not stated
Model
Monitor
Connection
DisplayPort
System
Windows 11
Browser
Chrome 150
Short Answer

On LCDs this is usually temporary image retention, not permanent burn-in. It fades on its own, usually within minutes to hours. Show changing content or a full white screen for a while, or turn the monitor off for a few hours, then recheck on grey.

Verified By Gamepad TesterVerified By Gamepad Tester
Isabela Costa
Isabela CostaVerified Gamepad Tester team memberGamepad Tester Team
Front-End Performance Engineer · Answered Jul 5, 2026

You are right that permanent burn-in is mainly an OLED issue. What you are seeing on an LCD is almost always image retention, a temporary ghost.

When an LCD shows the same image for many hours, the liquid crystals in those areas can hold a slight charge or alignment, leaving a faint outline when the image changes. It shows best on mid grey, exactly as in our burn-in test. Unlike OLED burn-in, it is not permanent wear.

It usually fades on its own. To speed it up, show changing content, such as a video, or display our full white screen for 30 minutes to an hour. Turning the monitor off for a few hours also works. Then check the grey screen again.

If it does not fade after a day of normal use, contact the manufacturer, since persistent retention on an LCD is unusual.

To avoid it, use a screen saver or let the monitor sleep when you step away, and avoid leaving static high-contrast windows on screen for very long periods. Some panels, especially certain IPS types, are more prone to it than others.

Step By Step Fix
  1. Display mid grey in the burn-in test to see the ghost image.
  2. Play changing content or show a full white screen for 30 to 60 minutes.
  3. Or turn the monitor off for a few hours.
  4. Recheck on grey.
  5. Use a screen saver or sleep timer to prevent it, and contact support if it lasts more than a day.

Tested on: Applies to IPS and VA LCD monitors. Behaviour reflects known LCD image retention characteristics.

Checked by Calder Wright on . How we verify answers

Did this fix your controller?
Was this answer helpful?
Share this guide

Community Replies 3

  • Accepted Solution
    Philippa GauntCommunity Member

    White screen for an hour cleared my retention completely.

  • Montgomery PryceCommunity Member

    Turned it off overnight and the ghost is gone in the morning. Setting a sleep timer now.

  • Ankit SharmaCommunity Member

    My IPS monitor does this with the taskbar, always fades though.

Add Your Reply

Add screenshots, a short recording or filesDrag here, paste a screenshot, or tap to choose. Up to 2 files, 8 MB each. JPG, JPEG, PNG, WEBP, GIF, TXT, LOG, PDF, JSON, MP4, WEBM
Isabela Costa
Written and tested by

Isabela CostaVerified Gamepad Tester team member

Front-End Performance Engineer at Gamepad Tester

Isabela works on graphics performance. A test that polls a controller continuously and repaints an SVG on every frame can saturate a budget phone's CPU, and once the frame rate drops the readings stop being trustworthy. Her work is keeping the overlays and animations cheap: minimal repaints, fewer live nodes, and a render path that degrades gracefully instead of stuttering. On Gamepad Tester she is responsible for the performance of the tools on mobile and low-end devices.

Rendering performanceSVG optimisationlow-end device supportCPU and frame budget
  • 15 answers on Gamepad Tester
  • Owns the render and CPU budget for the test tools on mobile and low-end hardware.
  • Reviewed by Calder Wright

The Team Behind These Answers

All 40 specialists

Each answer is written by the specialist who owns that part of the hardware, tested on a real controller, and checked by a second team member. How we verify answers

Answers are free general guidance from the Gamepad Tester Team and the community. Opening a controller or replacing a thumbstick module can void your warranty, so check the maker's support or warranty first. Battery and soldering work carries a real risk of damage or injury.

Free Controller Tests

Every test runs in your own browser with the Gamepad API. No sign up, no download, and your controller data never leaves your device.

All tools

Read Next On The Gamepad Tester Blog

All articles

Latest From The Community

The newest replies from players and the Gamepad Tester Team.

All guides