Skip to main content

Gamepad Tester

AnsweredVerified By Gamepad TesterVerified By Gamepad Tester

My 240Hz Monitor Does Not Feel Any Smoother Than My Old 144Hz One

Asked by Zachary H.0 views

Upgraded from 144Hz to 240Hz and honestly I can't tell the difference in games. Your refresh rate test shows 240 and the FPS test is smooth. Did I waste my money or is something set wrong?

Brand
Not stated
Model
240Hz monitor
Connection
DisplayPort
System
Windows 11
Browser
Chrome 149
Short Answer

A 240Hz monitor only looks smoother when the game runs near 240 frames per second. If your games run at 120 to 150, you will see little difference from 144Hz. Check your in-game frame rate, frame cap and V-Sync settings.

Verified By Gamepad TesterVerified By Gamepad Tester
Calder Wright
Calder WrightVerified Gamepad Tester team memberGamepad Tester Team
Front-End Web Architect And Gamepad API Lead · 13+ years experience · Answered Jun 21, 2026

Your test results show the monitor is working at 240Hz, so the question is what your games are sending it.

A high refresh monitor can only show as many new frames as the game produces. If a game runs at 130 frames per second, a 240Hz monitor and a 144Hz monitor both show about 130 new frames, so they look nearly the same. To see the benefit, the game needs to run well above 144, ideally close to 240.

So check the frame rate in your games with an on-screen counter. Look for anything capping it: a frame cap set to 144 from your old monitor, V-Sync tied to a lower rate, or a power saving mode on a laptop.

The benefit is also smaller than going from 60 to 144. Going from 60 to 144 is very noticeable for most people; 144 to 240 is subtler and shows most in fast competitive shooters, where motion clarity and slightly lower latency matter. In slower games many players genuinely cannot tell.

If your games run near 240 and you still notice nothing, that is normal for many people. The monitor is not faulty, and the gain is there in fast motion even when it is hard to feel.

Step By Step Fix
  1. Confirm the refresh rate test shows 240Hz.
  2. Turn on an in-game frame rate counter and check what your games actually reach.
  3. Remove old frame caps set to 144 and check V-Sync settings.
  4. Lower settings in competitive games to get closer to 240 frames per second.
  5. Compare in a fast shooter, where the difference is most visible.

Tested on: Applies to high refresh monitors on Windows 11. Browser frame timing per MDN's requestAnimationFrame documentation.

Checked by Devon Miller on . How we verify answers

Did this fix your controller?
Was this answer helpful?
Share this guide

Community Replies 3

  • Accepted Solution
    Jordan PikeCommunity Member

    I had a 144 cap left in my GPU settings. Removed it and the difference became obvious in shooters.

  • Zachary HollowayCommunity Member

    My games were only hitting about 140. Lowered settings in my main shooter and it's noticeably smoother now.

  • Siddharth RaoCommunity Member

    Honestly in single-player games I can't tell either. Shooters yes.

Add Your Reply

Add screenshots, a short recording or filesDrag here, paste a screenshot, or tap to choose. Up to 2 files, 8 MB each. JPG, JPEG, PNG, WEBP, GIF, TXT, LOG, PDF, JSON, MP4, WEBM
Calder Wright
Written and tested by

Calder WrightVerified Gamepad Tester team member

Front-End Web Architect And Gamepad API Lead at Gamepad Tester

Calder is a front-end web architect working with the HTML5 Gamepad API. His focus is the part most browser testers get wrong: reading a controller often enough, and timing it well enough, that the numbers on screen match what the hardware is actually sending. He writes the polling loops that capture analog trigger tension and stick travel without dropping samples, and renders them on 2D vector layouts that hold a steady 60+ FPS on ordinary laptops. On Gamepad Tester he maintains the main tester tool, the button test and the trigger pressure test, and reviews any answer that explains how a reading on this site should be interpreted.

Gamepad APIbrowser polling rateanalog trigger captureSVG and canvas renderingfront-end performance
  • 23 answers on Gamepad Tester
  • 13+ years experience
  • Maintains the browser-side test code on Gamepad Tester, including the polling loop used by the trigger pressure and stick drift tests.
  • Reviewed by Devon Miller

The Team Behind These Answers

All 40 specialists

Each answer is written by the specialist who owns that part of the hardware, tested on a real controller, and checked by a second team member. How we verify answers

Answers are free general guidance from the Gamepad Tester Team and the community. Opening a controller or replacing a thumbstick module can void your warranty, so check the maker's support or warranty first. Battery and soldering work carries a real risk of damage or injury.

Free Controller Tests

Every test runs in your own browser with the Gamepad API. No sign up, no download, and your controller data never leaves your device.

All tools

Read Next On The Gamepad Tester Blog

All articles

Latest From The Community

The newest replies from players and the Gamepad Tester Team.

All guides