Skip to main content

Gamepad Tester

AnsweredVerified By Gamepad TesterVerified By Gamepad Tester

What Does Uniformity Compensation Do, And Should I Turn It On?

Asked by Peregrine H.0 views

My monitor menu has a Uniformity Compensation option. When I turn it on, the uniformity test looks more even but the screen gets dimmer and contrast seems lower. What is it doing?

Brand
Not stated
Model
Monitor
Connection
DisplayPort
System
Windows 11
Browser
Edge 146
Short Answer

It evens out brightness and colour across the screen by dimming the brighter areas to match the darker ones, using factory measurements. The cost is lower maximum brightness and some contrast. Turn it on for colour-critical work, and leave it off for gaming and general use if you prefer brightness.

Verified By Gamepad TesterVerified By Gamepad Tester
Fiona Gallagher
Fiona GallagherVerified Gamepad Tester team memberGamepad Tester Team
Technical Content Strategist · Answered Mar 26, 2026

You have described exactly what it does. During manufacture, the monitor's brightness and colour are measured across the screen. Uniformity compensation uses that data to adjust different areas, mostly by turning down the brighter zones so they match the dimmer edges and corners. The whole screen becomes more even, as our uniformity test shows.

The trade-offs follow from how it works. Because it reduces the bright areas, maximum brightness drops. Contrast can also drop slightly. On some monitors it also locks other settings, such as brightness or picture modes.

When to use it: for photo editing, design and other colour-critical work, where a colour in the corner must look the same as in the centre. Many professional monitors are designed with this in mind.

When to leave it off: for gaming, films and general use, most people prefer the extra brightness and contrast, and normal uniformity variations are rarely noticeable in real content.

You can switch based on what you are doing. Compare a grey screen in our uniformity test both ways and decide whether the difference matters for your work.

Step By Step Fix
  1. Compare the uniformity test with compensation on and off.
  2. Turn it on for photo editing and colour-critical work.
  3. Leave it off for gaming and general use if you prefer brightness.
  4. Check which other settings it locks on your model.

Tested on: Applies to monitors with uniformity compensation features. Behaviour varies by manufacturer.

Checked by Sneha Reddy on . How we verify answers

Did this fix your controller?
Was this answer helpful?
Share this guide

Community Replies 3

  • Accepted Solution
    Clarabel FennimoreCommunity Member

    On for photo editing, off for games. Easy switch in the menu.

  • Peregrine HollowayCommunity Member

    Makes sense. Off for daily use, on when I edit. The brightness drop explained.

  • Tanmay KulkarniCommunity Member

    On my monitor it locks brightness, so I only use it for editing.

Add Your Reply

Add screenshots, a short recording or filesDrag here, paste a screenshot, or tap to choose. Up to 2 files, 8 MB each. JPG, JPEG, PNG, WEBP, GIF, TXT, LOG, PDF, JSON, MP4, WEBM
Fiona Gallagher
Written and tested by

Fiona GallagherVerified Gamepad Tester team member

Technical Content Strategist at Gamepad Tester

Fiona writes the technical guides. Controller diagnostics carry a lot of vocabulary that means nothing to the person holding the pad, from circularity error and polling rate to deadzone tolerance, and a reading nobody can interpret is not a diagnosis. Her work is explaining those concepts in plain language, in the order a player actually needs them, without softening the numbers into vagueness. On Gamepad Tester she edits the guides and the Q&A answers for clarity before they are published.

Technical writingexplaining measurement conceptsguide structureeditorial clarity
  • 15 answers on Gamepad Tester
  • Edits the guides and Q&A answers on this site for accuracy and plain language before publication.
  • Reviewed by Sneha Reddy

The Team Behind These Answers

All 40 specialists

Each answer is written by the specialist who owns that part of the hardware, tested on a real controller, and checked by a second team member. How we verify answers

Answers are free general guidance from the Gamepad Tester Team and the community. Opening a controller or replacing a thumbstick module can void your warranty, so check the maker's support or warranty first. Battery and soldering work carries a real risk of damage or injury.

Free Controller Tests

Every test runs in your own browser with the Gamepad API. No sign up, no download, and your controller data never leaves your device.

All tools

Read Next On The Gamepad Tester Blog

All articles

Latest From The Community

The newest replies from players and the Gamepad Tester Team.

All guides