Skip to main content

Gamepad Tester

AnsweredVerified By Gamepad TesterVerified By Gamepad Tester

Moving Objects Have Bright Halos Or Coloured Trails On My Monitor

Asked by Isaac W.0 views

In fast games, moving objects have a bright outline or a coloured trail in front of them. On your motion test I see a bright halo around the moving ball. The monitor has an overdrive setting. Is that the cause?

Brand
Not stated
Model
Monitor
Connection
DisplayPort
System
Windows 11
Browser
Chrome 153
Short Answer

Bright halos are usually inverse ghosting from overdrive set too high. Overdrive speeds up pixel changes, but too much makes pixels overshoot. Lower the overdrive one step at a time until the halo disappears with the shortest dark trail.

Verified By Gamepad TesterVerified By Gamepad Tester
Calder Wright
Calder WrightVerified Gamepad Tester team memberGamepad Tester Team
Front-End Web Architect And Gamepad API Lead · 13+ years experience · Answered Oct 15, 2026

Yes, overdrive is almost certainly the cause. LCD pixels take a little time to change colour, which shows as a dark trail behind moving objects. Overdrive pushes pixels harder so they change faster. Set too high, they overshoot the target colour, producing a bright halo or coloured edge around moving objects. That is called inverse ghosting or overshoot.

The goal is the setting with the shortest trail and no visible halo. On most monitors that is the middle setting, not the strongest.

Use our motion test with the moving object. Set overdrive to its lowest level and watch the trail, then step it up one level at a time. At each step, look for a dark trail behind the object and a bright halo around it. Stop at the highest level that shows no halo.

Refresh rate matters too. Overdrive often behaves differently at different refresh rates, and with variable refresh, the best setting at 165Hz may overshoot at 60Hz. If you play at a range of frame rates, choose the setting that looks clean across them, or a variable overdrive mode if your monitor has one.

Step By Step Fix
  1. Open the motion test and watch the moving object.
  2. Set overdrive to its lowest level and note the trail.
  3. Increase overdrive one level at a time.
  4. Stop at the highest level with no bright halo.
  5. Check again at the refresh rates and frame rates you usually play at.

Tested on: Applies to LCD monitors with overdrive settings on Windows 11. Motion test frame timing per MDN's requestAnimationFrame documentation.

Checked by Devon Miller on . How we verify answers

Did this fix your controller?
Was this answer helpful?
Share this guide

Community Replies 3

  • Accepted Solution
    Theo WakefieldCommunity Member

    Extreme overdrive was the culprit. Normal setting and the halos are gone.

  • Isaac WetherbyCommunity Member

    Middle setting is the sweet spot on mine. No halo and the trail is short. Thanks!

  • Rahul VenkataramanCommunity Member

    Variable overdrive mode on my monitor handles different frame rates well.

Add Your Reply

Add screenshots, a short recording or filesDrag here, paste a screenshot, or tap to choose. Up to 2 files, 8 MB each. JPG, JPEG, PNG, WEBP, GIF, TXT, LOG, PDF, JSON, MP4, WEBM
Calder Wright
Written and tested by

Calder WrightVerified Gamepad Tester team member

Front-End Web Architect And Gamepad API Lead at Gamepad Tester

Calder is a front-end web architect working with the HTML5 Gamepad API. His focus is the part most browser testers get wrong: reading a controller often enough, and timing it well enough, that the numbers on screen match what the hardware is actually sending. He writes the polling loops that capture analog trigger tension and stick travel without dropping samples, and renders them on 2D vector layouts that hold a steady 60+ FPS on ordinary laptops. On Gamepad Tester he maintains the main tester tool, the button test and the trigger pressure test, and reviews any answer that explains how a reading on this site should be interpreted.

Gamepad APIbrowser polling rateanalog trigger captureSVG and canvas renderingfront-end performance
  • 23 answers on Gamepad Tester
  • 13+ years experience
  • Maintains the browser-side test code on Gamepad Tester, including the polling loop used by the trigger pressure and stick drift tests.
  • Reviewed by Devon Miller

The Team Behind These Answers

All 40 specialists

Each answer is written by the specialist who owns that part of the hardware, tested on a real controller, and checked by a second team member. How we verify answers

Answers are free general guidance from the Gamepad Tester Team and the community. Opening a controller or replacing a thumbstick module can void your warranty, so check the maker's support or warranty first. Battery and soldering work carries a real risk of damage or injury.

Free Controller Tests

Every test runs in your own browser with the Gamepad API. No sign up, no download, and your controller data never leaves your device.

All tools

Read Next On The Gamepad Tester Blog

All articles

Latest From The Community

The newest replies from players and the Gamepad Tester Team.

All guides