Skip to main content

Gamepad Tester

AnsweredVerified By Gamepad TesterVerified By Gamepad Tester

How Do I Adjust The Stick Tension On My Xbox Elite Series 2?

Asked by Elliot B.0 views

The sticks on my Elite Series 2 feel too loose for precise aiming. I heard you can change the tension. How, and does it affect the readings on your drift test?

Brand
Microsoft
Model
Xbox Elite Wireless Controller Series 2 (Model 1797)
Connection
USB-C Cable
System
Windows 11
Browser
Chrome 149
Detected Controller
Xbox Wireless Controller
Buttons And Axes
17 buttons, 6 axes
Test used in this questionStick Drift TestDetect unwanted stick movement while you keep your hands off
Open Free Test
Short Answer

The Elite Series 2 has adjustable stick tension using the small tool included in the box. Remove the stick tops, insert the tool and turn it to tighten or loosen. Tension changes feel, not the sensor, so drift readings should not change; check centring afterwards.

Verified By Gamepad TesterVerified By Gamepad Tester
Thiago Alves
Thiago AlvesVerified Gamepad Tester team memberGamepad Tester Team
Hardware Repair Educator · 11+ years experience · Answered Jun 4, 2026

The Elite Series 2 has this built in. Its box includes a small adjustment tool for stick tension.

Remove the stick tops first; on the Elite they are magnetic and pull straight off. Insert the tension tool into the stick shaft, then turn it to adjust: one direction tightens, the other loosens. The controller has a few tension levels, so turn until it clicks into the next level. Adjust each stick separately; many players like a tighter right stick for aiming and a lighter left stick for movement.

Tension changes how hard you have to push, not what the sensor reads, so your resting values in the drift test should stay the same. It is still worth running the test afterwards and checking the range view, because a stiffer spring returns the stick to centre more firmly.

Tighter tension can help precise, small aiming movements and reduce overshooting. Too tight can tire your thumbs in long sessions, so try each level for a while.

If the tool is lost, replacement tools are available, and a similar small screwdriver bit can work, but avoid forcing it.

Step By Step Fix
  1. Pull off the magnetic stick tops.
  2. Insert the included tension tool into the stick shaft.
  3. Turn it to tighten or loosen until it clicks into the next level.
  4. Adjust each stick separately to suit aiming and movement.
  5. Run the stick drift test and range view afterwards.

Tested on: Applies to Xbox Elite Wireless Controller Series 2. Adjustment per Xbox support's Elite Series 2 configuration guide.

Checked by Garrett Lindsay on . How we verify answers

Did this fix your controller?
Was this answer helpful?
Share this guide

Community Replies 3

  • Accepted Solution
    Fraser McAlpineCommunity Member

    Tightest setting on the right stick made a big difference to my aim.

  • Elliot BrabazonCommunity Member

    Set the right stick to the tightest and left to medium. Drift test still reads 0.00. Feels much better.

  • Yuvraj SethiCommunity Member

    Too tight tired my thumbs, medium is my sweet spot.

Add Your Reply

Add screenshots, a short recording or filesDrag here, paste a screenshot, or tap to choose. Up to 2 files, 8 MB each. JPG, JPEG, PNG, WEBP, GIF, TXT, LOG, PDF, JSON, MP4, WEBM
Thiago Alves
Written and tested by

Thiago AlvesVerified Gamepad Tester team member

Hardware Repair Educator at Gamepad Tester

Thiago teaches controller repair. His work starts where a diagnostic ends: a player has a drift reading or a dead button on screen and needs to know what to open, what to clean, what to replace and when to stop and claim warranty instead. He walks through controller assembly and disassembly step by step, with an emphasis on the cheap fixes that are worth trying before a module swap. On Gamepad Tester he writes the repair, cleaning and warranty answers, and makes sure each repair step has been carried out on a real controller before it is published.

Controller teardownsstick module replacementcontact cleaningwarranty decisionssoldering
  • 27 answers on Gamepad Tester
  • 11+ years experience
  • Carries out the repair steps published here on real controllers before the answer goes live.
  • Reviewed by Garrett Lindsay

The Team Behind These Answers

All 40 specialists

Each answer is written by the specialist who owns that part of the hardware, tested on a real controller, and checked by a second team member. How we verify answers

Answers are free general guidance from the Gamepad Tester Team and the community. Opening a controller or replacing a thumbstick module can void your warranty, so check the maker's support or warranty first. Battery and soldering work carries a real risk of damage or injury.

Free Controller Tests

Every test runs in your own browser with the Gamepad API. No sign up, no download, and your controller data never leaves your device.

All tools

Read Next On The Gamepad Tester Blog

All articles

Latest From The Community

The newest replies from players and the Gamepad Tester Team.

All guides