Skip to main content

Gamepad Tester

AnsweredVerified By Gamepad TesterVerified By Gamepad Tester

My Monitor Says 1ms Response Time But Motion Still Looks Blurry

Asked by Bethany W.0 views

The box says 1ms response time but on your response time test moving objects still look blurry with trails. Is the 1ms claim false?

Brand
Not stated
Model
Monitor
Connection
DisplayPort
System
Windows 11
Browser
Chrome 151
Short Answer

Response time claims are usually best-case grey to grey or MPRT figures, measured at the most aggressive overdrive setting. Real average transitions are often slower. And even with fast pixels, sample and hold motion blur remains unless refresh rate is high or strobing is used.

Verified By Gamepad TesterVerified By Gamepad Tester
Arjun Mehta
Arjun MehtaVerified Gamepad Tester team memberGamepad Tester Team
Calibration And Signal Processing Programmer · Answered Aug 26, 2026

The claim is not exactly false, but it is a best case that rarely matches what you see.

There are two common figures. Grey to grey, GtG, measures how long pixels take to change between shades. Advertised GtG figures are often the fastest single transition, measured at the most aggressive overdrive setting, which may cause halos in real use. Average transitions across all shades are usually several times slower, especially dark ones.

MPRT, moving picture response time, measures perceived blur, and is often quoted with backlight strobing turned on. Without strobing, the real figure is much higher.

And there is sample and hold blur. Even with instant pixels, each frame stays on screen for the whole refresh period, so motion looks soft as your eyes track it. At 144 Hz, each frame lasts about 7 milliseconds, far longer than 1ms. That is why OLED panels, with near-instant pixels, still show some motion blur.

So to reduce what you see: use a sensible overdrive setting, run at the highest refresh rate, keep frame rates high in games, and try strobing if available. Reviews that measure average response times are far more useful than box figures.

Step By Step Fix
  1. Treat box response times as best-case figures.
  2. Set overdrive to the level with short trails and no halos.
  3. Run the monitor at its highest refresh rate and keep frame rates high.
  4. Try backlight strobing for less blur if available.
  5. Check reviews that measure average response times.

Tested on: General explanation of display response time measurements. Test animations rely on browser frame timing per MDN's requestAnimationFrame documentation.

Checked by Devon Miller on . How we verify answers

Did this fix your controller?
Was this answer helpful?
Share this guide

Community Replies 3

  • Accepted Solution
    Cosmo HarringtonCommunity Member

    The 1ms figure on mine only applied at extreme overdrive, which looked awful.

  • Bethany WolstencroftCommunity Member

    Makes sense. Normal overdrive and 165 Hz look best on mine. Reviews are going to be my guide next time.

  • Vivaan MalhotraCommunity Member

    Average response times in reviews told me far more than the box did.

Add Your Reply

Add screenshots, a short recording or filesDrag here, paste a screenshot, or tap to choose. Up to 2 files, 8 MB each. JPG, JPEG, PNG, WEBP, GIF, TXT, LOG, PDF, JSON, MP4, WEBM
Arjun Mehta
Written and tested by

Arjun MehtaVerified Gamepad Tester team member

Calibration And Signal Processing Programmer at Gamepad Tester

Arjun writes the maths between a controller and the screen. A raw axis value is noisy, unscaled and centred imperfectly, so his filters handle the parts that decide whether a test is useful: removing sensor noise without hiding a genuine fault, normalising ranges across controllers that report differently, and plotting the result as a clean graph where real drift is visible and jitter is not mistaken for it. On Gamepad Tester he maintains the calibration maths in the deadzone and drift tests, and explains in answers what a given reading does and does not prove.

Signal filteringaxis normalisationcalibration mathsdrift versus noisedata visualisation
  • 22 answers on Gamepad Tester
  • Maintains the calibration and filtering maths behind the deadzone, drift and trigger readings shown on this site.
  • Reviewed by Devon Miller

The Team Behind These Answers

All 40 specialists

Each answer is written by the specialist who owns that part of the hardware, tested on a real controller, and checked by a second team member. How we verify answers

Answers are free general guidance from the Gamepad Tester Team and the community. Opening a controller or replacing a thumbstick module can void your warranty, so check the maker's support or warranty first. Battery and soldering work carries a real risk of damage or injury.

Free Controller Tests

Every test runs in your own browser with the Gamepad API. No sign up, no download, and your controller data never leaves your device.

All tools

Read Next On The Gamepad Tester Blog

All articles

Latest From The Community

The newest replies from players and the Gamepad Tester Team.

All guides