Skip to main content

Gamepad Tester

AnsweredVerified By Gamepad TesterVerified By Gamepad Tester

Does A 144 Hz Monitor Have Less Input Lag Than 60 Hz?

Asked by Corin H.0 views

Switching my monitor from 60 to 144 Hz, games feel more responsive, and your input lag test average dropped a bit. Is that real, or just smoother motion fooling me?

Brand
Not stated
Model
Monitor
Connection
DisplayPort
System
Windows 11
Browser
Chrome 144
Short Answer

It is real. At 60 Hz a new frame appears every 16.7 ms; at 144 Hz every 6.9 ms, so new information reaches the screen sooner on average. Higher frame rates in games also cut processing delay. The improvement is a few milliseconds, but it is measurable and noticeable.

Verified By Gamepad TesterVerified By Gamepad Tester
Nadia Brooks
Nadia BrooksVerified Gamepad Tester team memberGamepad Tester Team
Esports Performance Consultant · 12+ years experience · Answered Jan 27, 2026

Both effects are real, and they add up.

Refresh timing. At 60 Hz, the monitor shows a new image every 16.7 milliseconds. At 144 Hz, every 6.9 milliseconds. When something happens in a game, it has to wait for the next refresh to appear. On average, that wait is about half a refresh period, so going from 60 to 144 Hz cuts several milliseconds of display delay.

Frame rate. To benefit, the game also needs to run at higher frame rates. A game running at 144 frames per second also processes and draws each frame sooner than one at 60, which reduces lag before the image even reaches the monitor.

Perception. Smoother motion also makes aiming feel more connected, which adds to the impression of responsiveness. So it is a mix of real lag reduction and clearer motion.

Your input lag test result fits this: a lower average after switching. To see it clearly, run the test several times at each refresh rate and compare averages, since single results vary with reaction time.

The biggest lag savings usually come from game mode on TVs, wired controllers and mice, and sensible V-Sync settings, but refresh rate is a genuine piece.

Step By Step Fix
  1. Set the monitor to its highest refresh rate in Windows.
  2. Make sure games run at frame rates near that refresh rate.
  3. Run the input lag test several times at 60 Hz and at 144 Hz.
  4. Compare the averages rather than single results.
  5. Combine with wired input devices and sensible sync settings for the lowest lag.

Tested on: Applies to high refresh monitors on Windows 11. Timing per MDN's requestAnimationFrame documentation.

Checked by Devon Miller on . How we verify answers

Did this fix your controller?
Was this answer helpful?
Share this guide

Community Replies 3

  • Accepted Solution
    Linnea StrandCommunity Member

    My averages dropped by a few ms at 144 Hz. Felt much bigger in game than the number suggests.

  • Corin HalsteadCommunity Member

    Ran it ten times at each setting. 144 Hz is consistently lower. Not imagining it then.

  • Akshay RaoCommunity Member

    Frame rate matters too, 144 Hz with 60 FPS doesn't help much.

Add Your Reply

Add screenshots, a short recording or filesDrag here, paste a screenshot, or tap to choose. Up to 2 files, 8 MB each. JPG, JPEG, PNG, WEBP, GIF, TXT, LOG, PDF, JSON, MP4, WEBM
Nadia Brooks
Written and tested by

Nadia BrooksVerified Gamepad Tester team member

Esports Performance Consultant at Gamepad Tester

Nadia works with competitive players on the hardware side of performance. Before a tournament a pad needs more than a working-not-working check: she profiles input latency across the exact connection the player will use, confirms both sticks read consistently through their full range, and checks that nothing drifts once the controller is warm. A pad that passes is cleared for play; one that does not is replaced rather than argued about. On Gamepad Tester she answers the competitive and performance questions, and reviews answers that tell a player their controller is good enough.

Competitive controller validationlatency profilingstick consistencytournament hardware checks
  • 20 answers on Gamepad Tester
  • 12+ years experience
  • Profiles tournament controllers for latency and stick consistency as part of competitive hardware checks.
  • Reviewed by Devon Miller

The Team Behind These Answers

All 40 specialists

Each answer is written by the specialist who owns that part of the hardware, tested on a real controller, and checked by a second team member. How we verify answers

Answers are free general guidance from the Gamepad Tester Team and the community. Opening a controller or replacing a thumbstick module can void your warranty, so check the maker's support or warranty first. Battery and soldering work carries a real risk of damage or injury.

Free Controller Tests

Every test runs in your own browser with the Gamepad API. No sign up, no download, and your controller data never leaves your device.

All tools

Read Next On The Gamepad Tester Blog

All articles

Latest From The Community

The newest replies from players and the Gamepad Tester Team.

All guides