Skip to main content

Gamepad Tester

AnsweredVerified By Gamepad TesterVerified By Gamepad Tester

I See Glowing Halos Around Bright Objects On My Mini-LED Monitor

Asked by Annabelle S.0 views

My new mini-LED monitor has amazing contrast, but white text and the mouse cursor on a dark background have a glowing halo around them. Your blooming test shows it clearly. Is that a fault?

Brand
Not stated
Model
Mini-LED monitor
Connection
DisplayPort
System
Windows 11
Browser
Chrome 150
Short Answer

That is blooming, a normal side effect of local dimming. The backlight is divided into zones; when one zone lights up for a small bright object, the light spreads into surrounding dark areas. Try a lower or medium local dimming setting, use a dark grey rather than pure black background, or turn local dimming off for desktop work.

Verified By Gamepad TesterVerified By Gamepad Tester
Sneha Reddy
Sneha ReddyVerified Gamepad Tester team memberGamepad Tester Team
Hardware QA Lead · 7+ years experience · Answered Jul 4, 2026

What you see is blooming, and it comes with mini-LED technology.

A mini-LED monitor uses many small backlight zones behind the LCD. Each zone can dim or brighten independently, which gives deep blacks and bright highlights. But each zone is still much larger than a pixel. When a small bright object, like white text or the cursor, appears on a dark background, the zone behind it lights up, and some of that light leaks into the dark area around it. That glow is blooming.

It is most visible exactly where our blooming test puts it: small bright objects on black.

You can reduce it. Most mini-LED monitors offer local dimming levels, such as low, medium and high. Higher settings give deeper blacks but more blooming; lower settings reduce halos at some cost to contrast. Medium is often a good balance. For desktop work, many people turn local dimming down or off and enable it for films and HDR games. A dark grey desktop background instead of pure black also makes halos less obvious.

If blooming is uneven, such as one zone flickering or staying lit, that is worth a support contact.

Step By Step Fix
  1. Run the blooming test to see the halos around bright objects.
  2. Try low and medium local dimming settings.
  3. Use a dark grey background rather than pure black on the desktop.
  4. Turn local dimming up for films and HDR games, down for desktop work.
  5. Contact support if a zone flickers or stays stuck.

Tested on: Applies to mini-LED monitors and TVs with local dimming. Behaviour reflects how zone-based backlights work.

Checked by Isabela Costa on . How we verify answers

Did this fix your controller?
Was this answer helpful?
Share this guide

Community Replies 3

  • Accepted Solution
    Cyprian WolfeCommunity Member

    Medium local dimming is the sweet spot on mine. High looks great in films, halos everywhere on the desktop.

  • Annabelle SorrellCommunity Member

    Normal then. Medium dimming for desktop, high for HDR films. Much happier.

  • Siddhant KapurCommunity Member

    Dark grey wallpaper made the cursor halo far less noticeable.

Add Your Reply

Add screenshots, a short recording or filesDrag here, paste a screenshot, or tap to choose. Up to 2 files, 8 MB each. JPG, JPEG, PNG, WEBP, GIF, TXT, LOG, PDF, JSON, MP4, WEBM
Sneha Reddy
Written and tested by

Sneha ReddyVerified Gamepad Tester team member

Hardware QA Lead at Gamepad Tester

Sneha leads manual hardware QA. Her lab takes controllers that arrive with no published specifications, mostly budget and mobile pads, and puts each one through the same fixed set of checks: every button and axis registers, deadzones are inside tolerance, rumble motors both run, the battery holds its claimed runtime, and the pad still passes after a charge cycle or two. Pads that fail are documented rather than quietly dropped. On Gamepad Tester she reviews the answers about cheap controllers behaving unpredictably and about battery and charging faults.

Manual hardware QAbenchmark criteriabudget controller testingbattery runtimerumble verification
  • 35 answers on Gamepad Tester
  • 7+ years experience
  • Runs the manual QA checks behind this site's answers on budget controller faults and battery behaviour.
  • Reviewed by Isabela Costa

The Team Behind These Answers

All 40 specialists

Each answer is written by the specialist who owns that part of the hardware, tested on a real controller, and checked by a second team member. How we verify answers

Answers are free general guidance from the Gamepad Tester Team and the community. Opening a controller or replacing a thumbstick module can void your warranty, so check the maker's support or warranty first. Battery and soldering work carries a real risk of damage or injury.

Free Controller Tests

Every test runs in your own browser with the Gamepad API. No sign up, no download, and your controller data never leaves your device.

All tools

Read Next On The Gamepad Tester Blog

All articles

Latest From The Community

The newest replies from players and the Gamepad Tester Team.

All guides