Skip to main content

Gamepad Tester

AnsweredVerified By Gamepad TesterVerified By Gamepad Tester

How Do I Know If G-Sync Or FreeSync Is Actually Working?

Asked by Tristram H.0 views

I enabled G-Sync in the NVIDIA control panel for my FreeSync monitor, but I'm not sure it's actually doing anything. Your G-Sync and FreeSync test has a moving scene with a frame rate slider. What should I look for?

Brand
Not stated
Model
Monitor
Connection
DisplayPort
System
Windows 11
Browser
Chrome 152
Short Answer

When variable refresh works, motion stays smooth without tearing as the frame rate changes. The clearest check is the monitor's on-screen refresh rate display, which should change with the frame rate. NVIDIA can also show a G-Sync indicator overlay.

Verified By Gamepad TesterVerified By Gamepad Tester
Lucas Rocha
Lucas RochaVerified Gamepad Tester team memberGamepad Tester Team
Linux And Input Subsystem Engineer · 12+ years experience · Answered Sep 7, 2026

There are three good ways to confirm it.

The monitor's refresh counter. Many monitors have an on-screen display option that shows the current refresh rate. With variable refresh working, that number follows the game's or test's frame rate, for example dropping to 90 when the frame rate is 90. If it stays fixed at 144 while the frame rate changes, variable refresh is not active.

The driver indicator. In the NVIDIA control panel, the Display menu includes an option to show a G-Sync compatible indicator on screen. AMD's software also shows FreeSync status for the display.

The visual check. In our G-Sync and FreeSync test, move the frame rate slider below your refresh rate. With variable refresh working, motion stays smooth and there is no tearing line. With it off, you see tearing or judder as the frame rate changes. Browsers may not always trigger variable refresh, though, so a game is the most reliable check.

Common reasons it does not activate: the monitor's own adaptive sync or FreeSync option is off in its menu, the connection is HDMI where DisplayPort is needed on some setups, or the game runs in a mode that does not support it.

Step By Step Fix
  1. Turn on the monitor's FreeSync or adaptive sync option in its own menu.
  2. Enable the monitor's on-screen refresh rate display if available.
  3. Turn on the G-Sync indicator in the NVIDIA control panel's Display menu.
  4. Move the frame rate slider in the test and watch for smooth, tear-free motion.
  5. Check in a game that the refresh counter follows the frame rate.

Tested on: Applies to G-Sync and FreeSync monitors with NVIDIA and AMD graphics on Windows 11. Browser behaviour can differ from games.

Checked by Calder Wright on . How we verify answers

Did this fix your controller?
Was this answer helpful?
Share this guide

Community Replies 3

  • Accepted Solution
    Ingrid BjornssonCommunity Member

    Monitor's FreeSync option was off in its menu, so G-Sync never activated. Turned it on, counter moves now.

  • Tristram HowarthCommunity Member

    Indicator overlay shows G-Sync active in games, and the monitor's counter follows the frame rate. Working.

  • Yatin AroraCommunity Member

    DisplayPort was required on my monitor, HDMI didn't support it.

Add Your Reply

Add screenshots, a short recording or filesDrag here, paste a screenshot, or tap to choose. Up to 2 files, 8 MB each. JPG, JPEG, PNG, WEBP, GIF, TXT, LOG, PDF, JSON, MP4, WEBM
Lucas Rocha
Written and tested by

Lucas RochaVerified Gamepad Tester team member

Linux And Input Subsystem Engineer at Gamepad Tester

Lucas works on the Linux input subsystem. He follows how evdev registers a controller, how Steam Input sits on top of it and where the two disagree with the browser's view of the same device, which is the usual reason a pad behaves differently on a Steam Deck or a Linux desktop than on Windows. His testing targets parity: the same controller should produce the same reading on every operating system, and where it does not, the difference should be documented. On Gamepad Tester he handles the Linux and Steam Deck questions.

Linux evdev inputSteam InputSteam Deck controller handlingcross-platform input parity
  • 21 answers on Gamepad Tester
  • 12+ years experience
  • Compares controller readings across Linux, Steam Deck and Windows to confirm cross-platform parity.
  • Reviewed by Calder Wright

The Team Behind These Answers

All 40 specialists

Each answer is written by the specialist who owns that part of the hardware, tested on a real controller, and checked by a second team member. How we verify answers

Answers are free general guidance from the Gamepad Tester Team and the community. Opening a controller or replacing a thumbstick module can void your warranty, so check the maker's support or warranty first. Battery and soldering work carries a real risk of damage or injury.

Free Controller Tests

Every test runs in your own browser with the Gamepad API. No sign up, no download, and your controller data never leaves your device.

All tools

Read Next On The Gamepad Tester Blog

All articles

Latest From The Community

The newest replies from players and the Gamepad Tester Team.

All guides