Skip to main content

Gamepad Tester

AnsweredVerified By Gamepad TesterVerified By Gamepad Tester

Dark Gradients On My OLED Show Steps Even Though Bright Ones Are Smooth

Asked by Cecilia H.0 views

On your gradient banding test, bright gradients look perfectly smooth on my OLED monitor, but the dark end shows obvious steps and a few blotches. Is that the panel or a setting?

Brand
Not stated
Model
Monitor
Connection
DisplayPort
System
Windows 11
Browser
Edge 152
Short Answer

Steps near black are a known OLED trait: the panel has to control very small light levels, where each step is harder to reproduce smoothly. Settings can make it worse, such as a dark gamma, limited range or 8-bit output. Check those, then judge it in real dark content.

Verified By Gamepad TesterVerified By Gamepad Tester
Calder Wright
Calder WrightVerified Gamepad Tester team memberGamepad Tester Team
Front-End Web Architect And Gamepad API Lead · 13+ years experience · Answered Sep 28, 2026

It is likely a combination of the panel and how the near-black shades are handled.

OLED pixels can switch fully off, which gives perfect blacks. But driving them at very low levels, just above off, is tricky. The steps between the darkest shades are small, and the panel's electronics have to reproduce them precisely. Some panels show visible steps or slightly blotchy transitions in that range, sometimes called near-black posterisation. Bright gradients do not have this problem.

Settings can make it worse:

Bit depth. Use 10-bit output if the monitor supports it, in the graphics control panel, which gives more steps.

Colour range. A mismatch crushes or stretches dark shades, making steps more visible.

Gamma and black boost. Dark gamma modes or shadow boost settings exaggerate near-black steps.

After checking those, view our gradient test from your normal distance and some room light, then watch dark content. Mild near-black steps on a test pattern are common on OLEDs and rarely bother people in films or games. If they are obvious in dark scenes, compare with a firmware update or an exchange.

Step By Step Fix
  1. Set 10-bit output in the graphics control panel if supported.
  2. Make sure colour range matches between the PC and monitor.
  3. Use standard gamma and turn off shadow boost.
  4. Check for a monitor firmware update.
  5. View dark content to judge real-world impact.

Tested on: Applies to OLED monitors. Behaviour reflects known OLED near-black reproduction characteristics.

Checked by Rebecca Wright on . How we verify answers

Did this fix your controller?
Was this answer helpful?
Share this guide

Community Replies 3

  • Accepted Solution
    Montgomery AshCommunity Member

    Firmware update improved near-black handling on my OLED quite a bit.

  • Cecilia Holt-BramwellCommunity Member

    10-bit output smoothed it a little. Still faint steps right at the bottom, but I don't see them in films.

  • Ankur BhattCommunity Member

    Shadow boost was making mine much worse. Off and it's better.

Add Your Reply

Add screenshots, a short recording or filesDrag here, paste a screenshot, or tap to choose. Up to 2 files, 8 MB each. JPG, JPEG, PNG, WEBP, GIF, TXT, LOG, PDF, JSON, MP4, WEBM
Calder Wright
Written and tested by

Calder WrightVerified Gamepad Tester team member

Front-End Web Architect And Gamepad API Lead at Gamepad Tester

Calder is a front-end web architect working with the HTML5 Gamepad API. His focus is the part most browser testers get wrong: reading a controller often enough, and timing it well enough, that the numbers on screen match what the hardware is actually sending. He writes the polling loops that capture analog trigger tension and stick travel without dropping samples, and renders them on 2D vector layouts that hold a steady 60+ FPS on ordinary laptops. On Gamepad Tester he maintains the main tester tool, the button test and the trigger pressure test, and reviews any answer that explains how a reading on this site should be interpreted.

Gamepad APIbrowser polling rateanalog trigger captureSVG and canvas renderingfront-end performance
  • 23 answers on Gamepad Tester
  • 13+ years experience
  • Maintains the browser-side test code on Gamepad Tester, including the polling loop used by the trigger pressure and stick drift tests.
  • Reviewed by Rebecca Wright

The Team Behind These Answers

All 40 specialists

Each answer is written by the specialist who owns that part of the hardware, tested on a real controller, and checked by a second team member. How we verify answers

Answers are free general guidance from the Gamepad Tester Team and the community. Opening a controller or replacing a thumbstick module can void your warranty, so check the maker's support or warranty first. Battery and soldering work carries a real risk of damage or injury.

Free Controller Tests

Every test runs in your own browser with the Gamepad API. No sign up, no download, and your controller data never leaves your device.

All tools

Read Next On The Gamepad Tester Blog

All articles

Latest From The Community

The newest replies from players and the Gamepad Tester Team.

All guides