Skip to main content

Gamepad Tester

AnsweredVerified By Gamepad TesterVerified By Gamepad Tester

Should I Set My Monitor Gamma To 2.2 Or 2.4?

Asked by Thaddeus B.0 views

My monitor has gamma options and your gamma test shows a pattern where I'm supposed to match the stripes. What's the difference between 2.2 and 2.4 and which should I use? I game and watch films.

Brand
Not stated
Model
Monitor
Connection
DisplayPort
System
Windows 11
Browser
Chrome 152
Short Answer

Gamma controls how bright the mid tones look. 2.2 is the standard for PCs, the web and most games, and suits normal room lighting. 2.4 is darker in the mid tones and is used for films viewed in a dark room. Use 2.2 for general use and gaming, and 2.4 only for film watching in the dark if you like the look.

Verified By Gamepad TesterVerified By Gamepad Tester
Arjun Mehta
Arjun MehtaVerified Gamepad Tester team memberGamepad Tester Team
Calibration And Signal Processing Programmer · Answered Sep 26, 2026

Gamma decides how bright the in-between tones look, between black and white. A higher gamma makes mid tones darker and gives a more contrasty look; a lower gamma makes them lighter.

2.2 is the standard target for PCs, the web, Windows and most games. Content is generally made to look right at around 2.2, so it is the best default, especially in a normally lit room.

2.4 is darker in the mid tones. It is used as a reference for films and TV mastered for viewing in dark rooms. In a dark room it can look richer; in a bright room it can make shadows look too dark.

So for gaming and general use, choose 2.2. For watching films in a dark room, try 2.4 and keep it if you prefer it.

Our gamma test pattern helps check what you actually get. Stand at your normal distance and look at the striped area beside each grey patch: the patch whose brightness blends with the stripes shows the gamma your screen is producing. If the monitor's 2.2 setting looks closer to another value, adjust its gamma options or calibrate.

Avoid extreme gamma or black boost settings, which can crush or wash out shadows.

Step By Step Fix
  1. Set the monitor to gamma 2.2 for general use and gaming.
  2. Try 2.4 for films in a dark room if you prefer the look.
  3. View the gamma test from your normal distance.
  4. Find the patch that blends with the stripes to see your actual gamma.
  5. Adjust gamma options or calibrate if it differs from your target.

Tested on: Applies to monitors with gamma options. Gamma targets per common PC and film viewing standards.

Checked by Calder Wright on . How we verify answers

Did this fix your controller?
Was this answer helpful?
Share this guide

Community Replies 3

  • Accepted Solution
    Odette FernsbyCommunity Member

    2.2 for games, 2.4 for films at night. Switching modes is easy on my monitor.

  • Thaddeus BrightmanCommunity Member

    Gamma test showed my monitor's 2.2 setting was closer to 2.0, so I picked the next mode up. Looks right now.

  • Manish GroverCommunity Member

    Viewing distance matters for that stripe pattern, step back a bit.

Add Your Reply

Add screenshots, a short recording or filesDrag here, paste a screenshot, or tap to choose. Up to 2 files, 8 MB each. JPG, JPEG, PNG, WEBP, GIF, TXT, LOG, PDF, JSON, MP4, WEBM
Arjun Mehta
Written and tested by

Arjun MehtaVerified Gamepad Tester team member

Calibration And Signal Processing Programmer at Gamepad Tester

Arjun writes the maths between a controller and the screen. A raw axis value is noisy, unscaled and centred imperfectly, so his filters handle the parts that decide whether a test is useful: removing sensor noise without hiding a genuine fault, normalising ranges across controllers that report differently, and plotting the result as a clean graph where real drift is visible and jitter is not mistaken for it. On Gamepad Tester he maintains the calibration maths in the deadzone and drift tests, and explains in answers what a given reading does and does not prove.

Signal filteringaxis normalisationcalibration mathsdrift versus noisedata visualisation
  • 22 answers on Gamepad Tester
  • Maintains the calibration and filtering maths behind the deadzone, drift and trigger readings shown on this site.
  • Reviewed by Calder Wright

The Team Behind These Answers

All 40 specialists

Each answer is written by the specialist who owns that part of the hardware, tested on a real controller, and checked by a second team member. How we verify answers

Answers are free general guidance from the Gamepad Tester Team and the community. Opening a controller or replacing a thumbstick module can void your warranty, so check the maker's support or warranty first. Battery and soldering work carries a real risk of damage or injury.

Free Controller Tests

Every test runs in your own browser with the Gamepad API. No sign up, no download, and your controller data never leaves your device.

All tools

Read Next On The Gamepad Tester Blog

All articles

Latest From The Community

The newest replies from players and the Gamepad Tester Team.

All guides