Skip to main content

Gamepad Tester

AnsweredVerified By Gamepad TesterVerified By Gamepad Tester

Games Look Too Dark Or Washed Out, Which Monitor Gamma Mode Is Right?

Asked by Leopold V.0 views

My monitor has gamma modes labelled 1 to 5 with no explanation. Some games look too dark, others washed out. Your gamma test shows my current mode is quite dark. How do I pick the right one?

Brand
Not stated
Model
Monitor
Connection
DisplayPort
System
Windows 11
Browser
Edge 153
Short Answer

Numbered gamma modes usually map to different gamma values. Use the gamma test to find the mode that gives about 2.2, then leave it there and adjust brightness in each game's settings instead. Games are made for standard gamma, so a correct monitor setting fixes most problems.

Verified By Gamepad TesterVerified By Gamepad Tester
Devon Miller
Devon MillerVerified Gamepad Tester team memberGamepad Tester Team
Low Latency And Input Timing Engineer · 9+ years experience · Answered Oct 23, 2026

Numbered gamma modes are frustrating because the manual often does not say what they mean. Usually each number is a different gamma value, with lower numbers lighter and higher numbers darker, or the reverse on some brands.

Use our gamma test to decode them. Set mode 1, view the test from your normal distance, and note which gamma patch blends with the stripes. Repeat for each mode. One will land close to 2.2, the standard for PC games and the web.

Pick that mode and leave it. Then, instead of changing monitor gamma per game, use each game's own brightness or gamma calibration screen, usually shown on first launch or in display settings. Those screens are designed for the game's look.

If a game still looks washed out, check whether HDR is on in Windows while the game is SDR, which can make it look flat, and check the colour range setting. If it looks too dark, check for a black equaliser or dark boost setting on the monitor, but use it lightly.

With the monitor at standard gamma and games calibrated individually, most games should look as intended.

Step By Step Fix
  1. Cycle through the monitor's gamma modes and note the result in the gamma test for each.
  2. Choose the mode that gives about 2.2.
  3. Use each game's own brightness calibration screen.
  4. Check HDR is not making SDR games look flat.
  5. Use dark boost settings lightly if a specific game is too dark.

Tested on: Applies to monitors with numbered gamma modes. Gamma target per common PC standards.

Checked by Arjun Mehta on . How we verify answers

Did this fix your controller?
Was this answer helpful?
Share this guide

Community Replies 3

  • Accepted Solution
    Agnes WhitlockCommunity Member

    Mode 3 was 2.2 on mine, mode 1 was way too bright. The test decoded it in minutes.

  • Leopold Vance-AshbyCommunity Member

    Mode 2 matched 2.2 in the test. Using game brightness screens now and everything looks right.

  • Raghav ChandraCommunity Member

    HDR on with SDR games was my washed out problem.

Add Your Reply

Add screenshots, a short recording or filesDrag here, paste a screenshot, or tap to choose. Up to 2 files, 8 MB each. JPG, JPEG, PNG, WEBP, GIF, TXT, LOG, PDF, JSON, MP4, WEBM
Devon Miller
Written and tested by

Devon MillerVerified Gamepad Tester team member

Low Latency And Input Timing Engineer at Gamepad Tester

Devon is a low latency engineer. On a browser-based latency test the easiest mistake is measuring the wrong thing: network round trips, render queues and browser throttling can all add milliseconds that have nothing to do with the controller. His work is isolating the input path so that what the test reports is the hardware delay, and documenting the conditions under which the reading is trustworthy. On Gamepad Tester he owns the latency test and the input lag topic, and checks any answer that quotes a millisecond figure.

Input latency measurementdata path isolationwired versus wireless delaybrowser timing accuracy
  • 27 answers on Gamepad Tester
  • 9+ years experience
  • Owns the input timing path behind this site's latency test and verifies the millisecond figures quoted in answers.
  • Reviewed by Arjun Mehta

The Team Behind These Answers

All 40 specialists

Each answer is written by the specialist who owns that part of the hardware, tested on a real controller, and checked by a second team member. How we verify answers

Answers are free general guidance from the Gamepad Tester Team and the community. Opening a controller or replacing a thumbstick module can void your warranty, so check the maker's support or warranty first. Battery and soldering work carries a real risk of damage or injury.

Free Controller Tests

Every test runs in your own browser with the Gamepad API. No sign up, no download, and your controller data never leaves your device.

All tools

Read Next On The Gamepad Tester Blog

All articles

Latest From The Community

The newest replies from players and the Gamepad Tester Team.

All guides