Skip to main content

Gamepad Tester

AnsweredVerified By Gamepad TesterVerified By Gamepad Tester

How Can I Tell If My Controller Really Has Hall Effect Sticks?

Asked by Darius C.0 views

Bought a pro style controller off a marketplace listing that said hall effect sticks, but the box is gone and the seller isn't answering. Is there any way to test whether a controller actually has hall effect sticks? Does your site have a hall effect test, or is there some trick? Everything works fine, I just want to know if I got what I paid for.

Brand
Unknown
Model
Unbranded pro style PC controller
Connection
USB-C Cable
System
Windows 11
Browser
Chrome 148
Detected Controller
Xbox 360 Controller (XInput STANDARD GAMEPAD)
Buttons And Axes
17 buttons, 6 axes
Test used in this questionStick Drift TestDetect unwanted stick movement while you keep your hands off
Open Free Test
Short Answer

No on-screen reading can prove the sensor type, but a weak magnet test while the drift test runs is a reliable home check: magnetic sticks react, potentiometer sticks do not. The part number on the stick module is the definitive answer.

Verified By Gamepad TesterVerified By Gamepad Tester
Venom’s Tech (Abhishek)
Venom’s Tech (Abhishek)Verified Gamepad Tester team memberGamepad Tester Team
Peripheral Reviewer And Tech Journalist · 8+ years experience · Answered May 5, 2026

Good question to ask, because Hall effect on a marketplace listing is not always true, especially on unbranded pads. A browser only sees the numbers the controller sends, and both stick types report the same kind of values, so no web page can read the sensor type directly. What you can do is look for behaviour that only a magnetic sensor shows.

The magnet test is the useful one. Hall effect and TMR sticks work by sensing a small magnet fixed to the stick. Bring a weak magnet, like a fridge magnet, slowly towards the side of the stick while the stick drift test is running, without touching the stick. On a magnetic stick the resting value usually moves as the magnet gets close and returns when you take it away. A potentiometer stick will not react at all. Use something weak and keep it moving; you are looking for a reaction, not trying to force one.

The resting noise is a softer clue. Many Hall effect sticks show a very clean, stable centre, while worn potentiometers wander. A brand new potentiometer stick can also be very stable, though, so treat this as supporting evidence only.

The definitive check is the module itself. Stick modules usually carry a printed part number, and searching it tells you exactly what was fitted. Some replacement Hall effect modules copy the outer shape of a potentiometer module closely, so the part number is more reliable than looks. Opening the shell can affect a warranty or return, so do the magnet test first.

Step By Step Fix
  1. Open the stick drift test and leave the controller flat with nothing touching the sticks.
  2. Slowly bring a weak magnet, such as a fridge magnet, to about 1 cm from the side of the left stick. Do not touch the stick.
  3. Watch the resting value. A clear change that disappears when you move the magnet away points to a magnetic (Hall effect or TMR) stick. No change at all points to potentiometers.
  4. Repeat on the right stick, then move the magnet well away from the controller.
  5. Search the controller name shown in the tester with the words hall effect. Many brands state the stick type on their product page.
  6. If you still need certainty and are happy to open it, read the part number on the stick module and look it up. Opening it may end any return or warranty, so do this last.

Tested on: Applies to third-party pads sold as Hall effect, on Windows 11 with Chrome or Edge. Method relies on the published operating principle of Hall effect and TMR sticks, a magnet on the stick read by a sensor.

Checked by Chloe Henderson on . How we verify answers

Did this fix your controller?
Was this answer helpful?
Share this guide

Community Replies 4

  • Accepted Solution
    Marisol VegaCommunity Member

    Tried the fridge magnet on my 8BitDo and the reading moved straight away. Tried it on my old Xbox pad and nothing. Simple and it works.

  • Darius ColemanCommunity Member

    Mine reacted on both sticks. So they are magnetic after all, seller was honest. Way easier than opening it, thanks.

  • Haruto SatoCommunity Member

    Careful with strong neodymium magnets, I got a reading that stayed off for a few seconds after. A weak magnet is enough.

  • Chloe HendersonCommunity Member

    Good warning, Haruto. A strong magnet can push the reading far enough to look like a fault while it is close. A weak fridge magnet gives a clear enough reaction for this check.

Add Your Reply

Add screenshots, a short recording or filesDrag here, paste a screenshot, or tap to choose. Up to 2 files, 8 MB each. JPG, JPEG, PNG, WEBP, GIF, TXT, LOG, PDF, JSON, MP4, WEBM
Venom’s Tech (Abhishek)
Written and tested by

Venom’s Tech (Abhishek)Verified Gamepad Tester team member

Peripheral Reviewer And Tech Journalist at Gamepad Tester

Abhishek, known to his audience as Venom's Tech, is a tech journalist and peripheral reviewer who works at the budget end of the market, where quality control varies the most. He specialises in granular teardowns and comparisons of mobile clip-on controllers, cheap third-party pads and the stick modules inside them, which is where drift tends to appear first and earliest. On Gamepad Tester he covers the reviews and buying topic for mobile and budget hardware, and checks answers about third-party pads that behave differently from a first-party controller.

Mobile controllersbudget and third-party padsstick drift in clone hardwareperipheral teardowns
  • 11 answers on Gamepad Tester
  • 8+ years experience
  • Tests and reviews mobile and budget controllers hands-on, including teardowns of their stick modules.
  • Reviewed by Chloe Henderson

The Team Behind These Answers

All 40 specialists

Each answer is written by the specialist who owns that part of the hardware, tested on a real controller, and checked by a second team member. How we verify answers

Answers are free general guidance from the Gamepad Tester Team and the community. Opening a controller or replacing a thumbstick module can void your warranty, so check the maker's support or warranty first. Battery and soldering work carries a real risk of damage or injury.

Free Controller Tests

Every test runs in your own browser with the Gamepad API. No sign up, no download, and your controller data never leaves your device.

All tools

Read Next On The Gamepad Tester Blog

All articles

Latest From The Community

The newest replies from players and the Gamepad Tester Team.

All guides