Playing Mobile Games With A Controller: What Works, What Doesn’t, And What To Test Before You Spend
You paired the controller, the light went solid, your phone said "Connected," and then the game did absolutely…
I want to try gyro aiming on PC with my PS5 controller like on Switch. Some games don't seem to do anything when I tilt the controller. And your gyro test asks for permission to access the device, why does it need that when the normal tester doesn't?
Very few PC games read controller gyro directly. Steam Input adds gyro to almost any game by turning motion into mouse or stick movement. A gyro test asks for device permission because motion data is not part of the standard browser gamepad data.
Two separate questions, both good ones.
Why games ignore the gyro: most PC games use XInput, the Xbox controller standard, and XInput has no motion sensors. So unless a game was built with PlayStation motion support, it never sees the tilt. The universal fix is Steam Input. It reads the DualSense's gyro directly and converts motion into mouse movement or right stick movement, which every game understands. You choose when gyro is active, for example only while aiming down sights or while touching the right stick.
Why the gyro test asks for permission: the standard browser gamepad data covers buttons, sticks, triggers and rumble only. Motion sensors are not included. To read the gyro, a page has to use the browser's device access feature, which requires you to choose the controller in a permission prompt. That is a safety design, not a warning sign, and it works in Chrome and Edge.
Start with modest gyro sensitivity and an activation button; most people find always-on gyro tiring at first.
Tested on: Applies to DualSense on Windows 11 with Steam, Chrome and Edge. Steam Input behaviour per Valve's documentation; browser data scope per the W3C Gamepad specification.
Checked by Lucas Rocha on . How we verify answers
Low Level Systems Programmer at Gamepad Tester
Gabriel is a low-level C programmer working on desktop input architecture. He builds native tooling that samples stick and trigger telemetry at sub-millisecond intervals, below the rate a browser can reach, which gives a reference measurement to compare a web test against. When a browser reading looks wrong, his capture is how the team confirms whether the controller, the operating system or the page is at fault. On Gamepad Tester he provides the reference measurements behind the latency and drift answers.
Each answer is written by the specialist who owns that part of the hardware, tested on a real controller, and checked by a second team member. How we verify answers
Answers are free general guidance from the Gamepad Tester Team and the community. Opening a controller or replacing a thumbstick module can void your warranty, so check the maker's support or warranty first. Battery and soldering work carries a real risk of damage or injury.
Every test runs in your own browser with the Gamepad API. No sign up, no download, and your controller data never leaves your device.
You paired the controller, the light went solid, your phone said "Connected," and then the game did absolutely…
Gaming and trading look like separate worlds until you sit down and do both. One rewards reaction speed, pattern…
The Xbox Elite Series 2 seemed amazing for the first two weeks. Interchangeable thumbsticks, adjustable trigger locks…
The newest replies from players and the Gamepad Tester Team.