Skip to main content

Gamepad Tester

AnsweredVerified By Gamepad TesterVerified By Gamepad Tester

My Cheap 60 Hz Monitor Ghosts Badly, Can I Reduce It?

Asked by Harriet M.0 views

My budget 60 Hz monitor leaves trails behind moving objects, especially in fast games. Your ghosting test shows a clear trail. Is there anything I can change, or is it just a cheap panel?

Brand
Not stated
Model
Monitor
Connection
HDMI
System
Windows 11
Browser
Chrome 148
Short Answer

Look for an overdrive or response time setting in the monitor's menu; even budget monitors often have one. Set it to a medium level and check the ghosting test for shorter trails without halos. Beyond that, slow panels and 60 Hz motion blur are hardware limits.

Verified By Gamepad TesterVerified By Gamepad Tester
Venom’s Tech (Abhishek)
Venom’s Tech (Abhishek)Verified Gamepad Tester team memberGamepad Tester Team
Peripheral Reviewer And Tech Journalist · 8+ years experience · Answered May 29, 2026

There is usually one setting worth trying, and then you hit the panel's limits.

Overdrive. Many budget monitors have an overdrive setting, often called response time, trace free or something similar, sometimes buried in a picture or game menu. Overdrive pushes pixels to change faster. Try each level while watching our ghosting test: the trail behind the object should shorten. If you see a bright halo or coloured edge appear, that level is too strong; step back one.

Picture modes. Some monitors only allow overdrive in certain modes, or disable it in eco modes. Try the standard or game mode.

Cable and refresh. Make sure the monitor is actually at its native refresh rate; some budget monitors reach their best response only at their maximum rate.

The limits. Budget panels, especially some VA panels, have slow pixel transitions that overdrive can only partly fix. And at 60 Hz, motion blur from each frame being held for 16.7 milliseconds remains, even with fast pixels.

If ghosting bothers you in fast games, a 144 Hz or faster IPS monitor is one of the most noticeable upgrades you can make for the money.

Step By Step Fix
  1. Find the overdrive or response time setting in the monitor's menu.
  2. Try each level while watching the ghosting test.
  3. Stop at the strongest level without bright halos.
  4. Use standard or game mode if eco modes disable overdrive.
  5. Consider a 144 Hz or faster monitor if trails still bother you.

Tested on: Applies to budget LCD monitors. Behaviour reflects how overdrive affects pixel transitions.

Checked by Calder Wright on . How we verify answers

Did this fix your controller?
Was this answer helpful?
Share this guide

Community Replies 3

  • Accepted Solution
    Quintus BellamyCommunity Member

    My cheap monitor had overdrive hidden in the game menu. Medium setting halved the trail.

  • Harriet MoorcroftCommunity Member

    Found it under response time. Medium helped a lot, high made halos. Good enough until I upgrade.

  • Arnav MittalCommunity Member

    Went to a 144 Hz IPS later, trails basically gone.

Add Your Reply

Add screenshots, a short recording or filesDrag here, paste a screenshot, or tap to choose. Up to 2 files, 8 MB each. JPG, JPEG, PNG, WEBP, GIF, TXT, LOG, PDF, JSON, MP4, WEBM
Venom’s Tech (Abhishek)
Written and tested by

Venom’s Tech (Abhishek)Verified Gamepad Tester team member

Peripheral Reviewer And Tech Journalist at Gamepad Tester

Abhishek, known to his audience as Venom's Tech, is a tech journalist and peripheral reviewer who works at the budget end of the market, where quality control varies the most. He specialises in granular teardowns and comparisons of mobile clip-on controllers, cheap third-party pads and the stick modules inside them, which is where drift tends to appear first and earliest. On Gamepad Tester he covers the reviews and buying topic for mobile and budget hardware, and checks answers about third-party pads that behave differently from a first-party controller.

Mobile controllersbudget and third-party padsstick drift in clone hardwareperipheral teardowns
  • 15 answers on Gamepad Tester
  • 8+ years experience
  • Tests and reviews mobile and budget controllers hands-on, including teardowns of their stick modules.
  • Reviewed by Calder Wright

The Team Behind These Answers

All 40 specialists

Each answer is written by the specialist who owns that part of the hardware, tested on a real controller, and checked by a second team member. How we verify answers

Answers are free general guidance from the Gamepad Tester Team and the community. Opening a controller or replacing a thumbstick module can void your warranty, so check the maker's support or warranty first. Battery and soldering work carries a real risk of damage or injury.

Free Controller Tests

Every test runs in your own browser with the Gamepad API. No sign up, no download, and your controller data never leaves your device.

All tools

Read Next On The Gamepad Tester Blog

All articles

Latest From The Community

The newest replies from players and the Gamepad Tester Team.

All guides