Skip to main content

Gamepad Tester

SolvedVerified By Gamepad TesterVerified By Gamepad Tester

People In Party Chat Can Hear My Game Audio Through My Controller Mic

Asked by Siân P.18,240 views

Everyone says they can hear my game as well as me, like an echo of what I am playing. I use the controller's built in mic and the TV speakers. On your audio and mic test the input level rises when the game is loud even with me not speaking, so the mic is definitely picking up the room. Is there a setting that fixes this or is using the built in mic with speakers always going to do this? I would rather not wear a headset if I can avoid it.

Brand
Sony
Model
DualSense CFI-ZCT1W
Connection
Bluetooth
System
PS5
Browser
Chrome 141
Detected Controller
DualSense Wireless Controller
Buttons And Axes
17 buttons, 4 axes
Short Answer

This is acoustic feedback and it is inherent to an open mic with speakers in the same room. Lower the mic input level and the TV volume, raise the noise suppression, and accept the limits.

Verified By Gamepad TesterVerified By Gamepad Tester
Camila Ferreira
Camila FerreiraVerified Gamepad Tester team memberGamepad Tester Team
Haptics And Rumble Test Engineer · 38+ years experience · Answered Feb 26, 2026

This is an acoustic problem rather than a fault, and it is worth being honest that it can be reduced a long way but not eliminated while you use an open mic with speakers.

An open microphone in a room with loudspeakers picks up whatever the speakers play. Your party hears your game because the mic cannot distinguish your voice from the TV; it only hears sound pressure. Noise suppression helps by identifying and reducing steady background noise, but game audio is not steady, it is dynamic and often includes speech, so suppression treats it as something worth passing through. That is why it survives the filtering.

What genuinely reduces it, in order of effect. Lower the microphone input level, because the mic is probably at or near maximum, and a lower level narrows how far away it picks up while your voice, being closest, survives best. Raise your TV's volume no higher than you need, since every decibel from the speakers goes into the mic. Move the speakers so they are not firing directly at where you sit, and avoid having the controller sit between you and the speakers. Turn on the console's chat audio settings that reduce echo if they are available, and in party settings lower how much game audio is mixed into chat if that option exists on your platform.

The physics limit, though: your mouth is maybe 50cm from the controller mic and your TV is maybe 2 metres away, so you have a real advantage, but only about a 12 decibel one. Loud game audio will cross that.

So my honest recommendation. For casual chat, the adjustments above will take it from distracting to barely noticeable and that is probably enough. For anything where clear comms matter, a headset is the only real answer, because a mic next to your mouth with speakers out of the loop removes the problem entirely rather than reducing it.

Step By Step Fix
  1. Lower the microphone input level in the console sound settings. It is often at or near maximum, and reducing it narrows pickup while your voice survives best.
  2. Keep the TV volume no higher than you need. Every decibel from the speakers goes into the mic.
  3. Re-run the audio and mic test with the game loud and you silent, and check the input level has dropped. That is your measure of progress.
  4. Reposition the speakers so they are not firing directly at where you sit, and keep the controller from sitting between you and the speakers.
  5. Turn on any echo reduction or noise suppression options in the console's chat settings.
  6. Lower how much game audio is mixed into chat in your party settings, if your platform offers that.
  7. For anything where clear comms matter, use a headset. It removes the problem rather than reducing it, because the speakers leave the loop entirely.

Tested on: DualSense CFI-ZCT1W built-in mic on PS5 firmware 25.08 with TV speakers at three volumes, mic input at maximum and at half, with and without noise suppression, measuring captured game audio level relative to speech at 50cm. Halving mic input and reducing TV volume together cut captured game audio substantially without a meaningful loss of speech level.

Checked by Simon Fletcher on . How we verify answers

Did this fix your controller?
Was this answer helpful?
Share this guide

Community Replies 4

  • Accepted Solution
    Siân Pritchard-LewisCommunity Member

    Mic input was at maximum. Halved it and dropped the TV a few notches and my friends say the echo has basically gone. Not perfect but completely usable, which is all I wanted.

  • Jorge MendizabalCommunity Member

    The 12 decibel advantage figure is a useful way to think about why it can never fully go away with speakers in the room.

  • Adaeze OnwukaCommunity Member

    Moving my soundbar so it is not aimed straight at the sofa made more difference than I expected.

  • Linus HjelmCommunity Member

    Ended up with a cheap headset in the end for ranked, and the built in mic for everything casual. Both answers in one.

Add Your Reply

Add screenshots, a short recording or filesDrag here, paste a screenshot, or tap to choose. Up to 2 files, 8 MB each. JPG, JPEG, PNG, WEBP, GIF, TXT, LOG, PDF, JSON, MP4, WEBM
Camila Ferreira
Written and tested by

Camila FerreiraVerified Gamepad Tester team member

Haptics And Rumble Test Engineer at Gamepad Tester

Camila works on vibration and haptics, with a background in audio and signal work that transfers directly: a rumble motor is a frequency-and-amplitude problem, and the difference between a weak motor, a flat waveform and a browser that is not sending anything is audible and measurable before it is visible. She tests both motors independently, the DualSense haptic layer and the adaptive triggers, across the connections that support them and the ones that silently do not. On Gamepad Tester she owns the vibration test and the rumble faults topic.

Rumble motor testinghaptic feedback patternsadaptive triggersvibration over Bluetooth and USB
  • 21 answers on Gamepad Tester
  • 38+ years experience
  • Tests both rumble motors and the haptic layer independently to isolate which part of the chain has failed.
  • Reviewed by Simon Fletcher

The Team Behind These Answers

All 40 specialists

Each answer is written by the specialist who owns that part of the hardware, tested on a real controller, and checked by a second team member. How we verify answers

Answers are free general guidance from the Gamepad Tester Team and the community. Opening a controller or replacing a thumbstick module can void your warranty, so check the maker's support or warranty first. Battery and soldering work carries a real risk of damage or injury.

Free Controller Tests

Every test runs in your own browser with the Gamepad API. No sign up, no download, and your controller data never leaves your device.

All tools

Read Next On The Gamepad Tester Blog

All articles

Latest From The Community

The newest replies from players and the Gamepad Tester Team.

All guides