Skip to main content

Gamepad Tester

AnsweredVerified By Gamepad TesterVerified By Gamepad Tester

One Of My DualSense Adaptive Triggers Has No Resistance Anymore

Asked by Daniel K.0 views

In games with adaptive triggers, my left trigger still stiffens but the right one feels completely normal now, no resistance at all. It used to work. Trigger test shows R2 works fine as a normal trigger. Is the motor dead?

Brand
Sony
Model
DualSense CFI-ZCT1W
Connection
USB-C Cable
System
PS5
Browser
Chrome 147
Detected Controller
DualSense Wireless Controller
Buttons And Axes
17 buttons, 4 axes
Test used in this questionTrigger Pressure TestAnalog trigger travel, pressure levels and sensitivity
Open Free Test
Short Answer

If R2 still reads normally but never stiffens, the adaptive trigger mechanism on that side has likely failed. Check the trigger effect setting on the PS5 first and test in a game that uses triggers. If only one side stays flat, it is a hardware repair.

Verified By Gamepad TesterVerified By Gamepad Tester
Camila Ferreira
Camila FerreiraVerified Gamepad Tester team memberGamepad Tester Team
Haptics And Rumble Test Engineer · 38+ years experience · Answered Apr 11, 2026

The adaptive trigger is a separate mechanism from the trigger sensor. The sensor measures how far you pull; a small motor and gear train push back against your finger. Your trigger test shows the sensor works, so the question is the motor side.

Rule out settings first. On the PS5, check the controller settings for trigger effect intensity. If it is off or set very low, both triggers would feel flat, so that is less likely when only one side has lost it, but worth a check. Also test in a game you know uses resistance on R2 specifically, since some games only use it on one trigger.

If L2 stiffens and R2 never does in the same game, the R2 mechanism has most likely failed. Common causes are a worn or slipped gear, a broken plastic part in the mechanism, or the motor itself.

A browser cannot test this, because browsers cannot drive the DualSense's adaptive trigger motors, so the PS5 is the right place to confirm it.

If the controller is under warranty, use it. Otherwise repair shops replace the adaptive trigger assembly, and the controller still works fully as a normal controller in the meantime.

Step By Step Fix
  1. On the PS5, check that Trigger Effect Intensity is turned on in the controller settings.
  2. Play a game known to use resistance on R2 and compare R2 with L2.
  3. Confirm in the trigger pressure test that R2 still reads smoothly from 0 to 1.
  4. If R2 never stiffens while L2 does, contact Sony support or a repair shop.
  5. Keep using it as a normal controller until it is repaired.

Tested on: Applies to DualSense CFI-ZCT1W on PS5 with current system software. Browser limits per MDN browser compatibility data for trigger effects.

Checked by Simon Fletcher on . How we verify answers

Did this fix your controller?
Was this answer helpful?
Share this guide

Community Replies 3

  • Accepted Solution
    Theo BarringtonCommunity Member

    Same failure on mine, gear inside had slipped. Repair shop fixed it in a day.

  • Daniel KovacCommunity Member

    Trigger effects are on and L2 stiffens fine, R2 never does. Booked a warranty repair.

  • Rhea MalhotraCommunity Member

    Good to know it still works normally meanwhile. I kept playing until mine was fixed.

Add Your Reply

Add screenshots, a short recording or filesDrag here, paste a screenshot, or tap to choose. Up to 2 files, 8 MB each. JPG, JPEG, PNG, WEBP, GIF, TXT, LOG, PDF, JSON, MP4, WEBM
Camila Ferreira
Written and tested by

Camila FerreiraVerified Gamepad Tester team member

Haptics And Rumble Test Engineer at Gamepad Tester

Camila works on vibration and haptics, with a background in audio and signal work that transfers directly: a rumble motor is a frequency-and-amplitude problem, and the difference between a weak motor, a flat waveform and a browser that is not sending anything is audible and measurable before it is visible. She tests both motors independently, the DualSense haptic layer and the adaptive triggers, across the connections that support them and the ones that silently do not. On Gamepad Tester she owns the vibration test and the rumble faults topic.

Rumble motor testinghaptic feedback patternsadaptive triggersvibration over Bluetooth and USB
  • 21 answers on Gamepad Tester
  • 38+ years experience
  • Tests both rumble motors and the haptic layer independently to isolate which part of the chain has failed.
  • Reviewed by Simon Fletcher

The Team Behind These Answers

All 40 specialists

Each answer is written by the specialist who owns that part of the hardware, tested on a real controller, and checked by a second team member. How we verify answers

Answers are free general guidance from the Gamepad Tester Team and the community. Opening a controller or replacing a thumbstick module can void your warranty, so check the maker's support or warranty first. Battery and soldering work carries a real risk of damage or injury.

Free Controller Tests

Every test runs in your own browser with the Gamepad API. No sign up, no download, and your controller data never leaves your device.

All tools

Read Next On The Gamepad Tester Blog

All articles

Latest From The Community

The newest replies from players and the Gamepad Tester Team.

All guides