Seedance 2.5 Flash: A New Way to Create AI-Powered Videos
Content creators, marketers, and businesses are finding creating images and videos more and more effortless via AI. As…
I never know what to set brightness and contrast to. Your greyscale test has steps from black to white. Is there a simple method to set both properly with it?
Use contrast to set the white end: lower it until the lightest steps are all distinguishable. Use brightness for comfort: on most monitors it controls the backlight, so set it to suit your room. Then check the darkest steps are visible; if not, check colour range and gamma rather than raising brightness too far.
A simple routine with the greyscale test works for most monitors.
Start in the monitor's standard or sRGB mode, with dynamic contrast and eco modes off.
Contrast first. Look at the lightest steps near white. Lower contrast until each of the last few steps is just distinguishable from its neighbour and from pure white. If they merge, contrast is too high. Many monitors look best slightly below maximum contrast.
Brightness next. On most monitors, brightness controls the backlight strength rather than the black level. Set it for comfort in your room: the white of the test should look bright but not glaring. Lower in a dim room, higher in a bright one. Many people find around a third to a half of maximum comfortable indoors.
Check the dark end. The darkest steps should be just visible above black. If they are not, the cause is usually a colour range mismatch or a dark gamma setting, not brightness. Fix those first, then use the monitor's black level or shadow setting if it has one.
Recheck in different lighting, such as day and evening, and adjust brightness only. Contrast usually stays set.
Tested on: Applies to LCD and OLED monitors. Visual adjustment guidance using standard greyscale test patterns.
Checked by Gabriel Silva on . How we verify answers
Technical Content Strategist at Gamepad Tester
Fiona writes the technical guides. Controller diagnostics carry a lot of vocabulary that means nothing to the person holding the pad, from circularity error and polling rate to deadzone tolerance, and a reading nobody can interpret is not a diagnosis. Her work is explaining those concepts in plain language, in the order a player actually needs them, without softening the numbers into vagueness. On Gamepad Tester she edits the guides and the Q&A answers for clarity before they are published.
Each answer is written by the specialist who owns that part of the hardware, tested on a real controller, and checked by a second team member. How we verify answers
Answers are free general guidance from the Gamepad Tester Team and the community. Opening a controller or replacing a thumbstick module can void your warranty, so check the maker's support or warranty first. Battery and soldering work carries a real risk of damage or injury.
Every test runs in your own browser with the Gamepad API. No sign up, no download, and your controller data never leaves your device.
Content creators, marketers, and businesses are finding creating images and videos more and more effortless via AI. As…
Bilibili Gaming defeated G2 Esports 3-1 in São Paulo on March 22, 2026, to win an international League of Legends…
Most gaming setup advice stops at the desk. The room around it gets ignored, which is strange when the room decides…
The newest replies from players and the Gamepad Tester Team.