Skip to main content

Gamepad Tester

AnsweredVerified By Gamepad TesterVerified By Gamepad Tester

How Do I Set Brightness And Contrast Correctly With The Greyscale Test?

Asked by Philippa R.0 views

I never know what to set brightness and contrast to. Your greyscale test has steps from black to white. Is there a simple method to set both properly with it?

Brand
Not stated
Model
Monitor
Connection
HDMI
System
Windows 11
Browser
Chrome 150
Short Answer

Use contrast to set the white end: lower it until the lightest steps are all distinguishable. Use brightness for comfort: on most monitors it controls the backlight, so set it to suit your room. Then check the darkest steps are visible; if not, check colour range and gamma rather than raising brightness too far.

Verified By Gamepad TesterVerified By Gamepad Tester
Fiona Gallagher
Fiona GallagherVerified Gamepad Tester team memberGamepad Tester Team
Technical Content Strategist · Answered Jul 24, 2026

A simple routine with the greyscale test works for most monitors.

Start in the monitor's standard or sRGB mode, with dynamic contrast and eco modes off.

Contrast first. Look at the lightest steps near white. Lower contrast until each of the last few steps is just distinguishable from its neighbour and from pure white. If they merge, contrast is too high. Many monitors look best slightly below maximum contrast.

Brightness next. On most monitors, brightness controls the backlight strength rather than the black level. Set it for comfort in your room: the white of the test should look bright but not glaring. Lower in a dim room, higher in a bright one. Many people find around a third to a half of maximum comfortable indoors.

Check the dark end. The darkest steps should be just visible above black. If they are not, the cause is usually a colour range mismatch or a dark gamma setting, not brightness. Fix those first, then use the monitor's black level or shadow setting if it has one.

Recheck in different lighting, such as day and evening, and adjust brightness only. Contrast usually stays set.

Step By Step Fix
  1. Use standard or sRGB mode with dynamic contrast off.
  2. Lower contrast until the lightest steps are distinguishable.
  3. Set brightness for comfort in your room.
  4. Check the darkest steps are visible; fix colour range or gamma if not.
  5. Adjust only brightness for different times of day.

Tested on: Applies to LCD and OLED monitors. Visual adjustment guidance using standard greyscale test patterns.

Checked by Gabriel Silva on . How we verify answers

Did this fix your controller?
Was this answer helpful?
Share this guide

Community Replies 3

  • Accepted Solution
    Hartley BrennanCommunity Member

    Contrast was at 100 and crushing my whites. 80 and every step shows.

  • Philippa RawdonCommunity Member

    Followed the steps. Contrast down a bit, brightness at 40 for my room, all steps visible now. Eyes are happier too.

  • Raunak MehtaCommunity Member

    Dark steps were hidden by limited range on mine, fixing that was the key.

Add Your Reply

Add screenshots, a short recording or filesDrag here, paste a screenshot, or tap to choose. Up to 2 files, 8 MB each. JPG, JPEG, PNG, WEBP, GIF, TXT, LOG, PDF, JSON, MP4, WEBM
Fiona Gallagher
Written and tested by

Fiona GallagherVerified Gamepad Tester team member

Technical Content Strategist at Gamepad Tester

Fiona writes the technical guides. Controller diagnostics carry a lot of vocabulary that means nothing to the person holding the pad, from circularity error and polling rate to deadzone tolerance, and a reading nobody can interpret is not a diagnosis. Her work is explaining those concepts in plain language, in the order a player actually needs them, without softening the numbers into vagueness. On Gamepad Tester she edits the guides and the Q&A answers for clarity before they are published.

Technical writingexplaining measurement conceptsguide structureeditorial clarity
  • 15 answers on Gamepad Tester
  • Edits the guides and Q&A answers on this site for accuracy and plain language before publication.
  • Reviewed by Gabriel Silva

The Team Behind These Answers

All 40 specialists

Each answer is written by the specialist who owns that part of the hardware, tested on a real controller, and checked by a second team member. How we verify answers

Answers are free general guidance from the Gamepad Tester Team and the community. Opening a controller or replacing a thumbstick module can void your warranty, so check the maker's support or warranty first. Battery and soldering work carries a real risk of damage or injury.

Free Controller Tests

Every test runs in your own browser with the Gamepad API. No sign up, no download, and your controller data never leaves your device.

All tools

Read Next On The Gamepad Tester Blog

All articles

Latest From The Community

The newest replies from players and the Gamepad Tester Team.

All guides