Best Controllers and Setups for Playing JRPGs
Nobody ever talks about controller ergonomics when they recommend JRPGs, and honestly, that is a mistake. These are…
Set up a 5.1 speaker system on my PC with three 3.5mm cables. In games the voices seem to come from the subwoofer and the centre speaker rumbles. Your speaker test plays the channels but centre and sub seem mixed up. What did I do wrong?
Centre and subwoofer swapped is very common with 5.1 on three 3.5mm cables, because both share one cable. Check each cable goes into the correct colour-coded jack, set Windows to 5.1, and use the speaker test to confirm each channel. Some audio apps also have a swap option.
You have hit one of the most common 5.1 setup issues. With three 3.5mm cables, one carries front left and right, one rear left and right, and one carries centre and subwoofer together. If anything in that chain is reversed, voices meant for the centre come out of the sub, and bass goes to the centre.
Check the cables first. PC jacks are usually colour-coded: green for front, black for rear, orange for centre and subwoofer. Make sure each cable goes to the matching input on the speaker system.
Then Windows. Open the classic Sound control panel, select the speakers, choose Configure, and set 5.1 Surround. The configuration screen has its own test that plays each speaker.
Then use our speaker test to play channels one at a time. If centre and sub are still swapped, look in your audio app for a centre and subwoofer swap option, which exists for exactly this reason. Some speaker systems also have a swap switch.
Finally, check the rear speakers are not swapped left and right, which is also easy to miss.
Tested on: Applies to analog 5.1 speaker systems on Windows 11. Steps per Microsoft's sound troubleshooting guide.
Checked by Gabriel Silva on . How we verify answers
Embedded Systems And Firmware Programmer at Gamepad Tester
Alistair is an embedded systems programmer. He writes custom firmware for third-party PC gamepads and builds input-parsing test rigs on microcontrollers such as the Arduino and Raspberry Pi Pico, which means he can see what a controller is sending at the wire level rather than guessing from what the operating system reports. That is usually the fastest way to settle whether a fault is in the pad, the driver or the browser. On Gamepad Tester he answers the firmware and driver questions, including the ones where an update has broken a working controller.
Each answer is written by the specialist who owns that part of the hardware, tested on a real controller, and checked by a second team member. How we verify answers
Answers are free general guidance from the Gamepad Tester Team and the community. Opening a controller or replacing a thumbstick module can void your warranty, so check the maker's support or warranty first. Battery and soldering work carries a real risk of damage or injury.
Every test runs in your own browser with the Gamepad API. No sign up, no download, and your controller data never leaves your device.
Nobody ever talks about controller ergonomics when they recommend JRPGs, and honestly, that is a mistake. These are…
Content creators, marketers, and businesses are finding creating images and videos more and more effortless via AI. As…
Bilibili Gaming defeated G2 Esports 3-1 in São Paulo on March 22, 2026, to win an international League of Legends…
The newest replies from players and the Gamepad Tester Team.