Skip to main content

Gamepad Tester

AnsweredVerified By Gamepad TesterVerified By Gamepad Tester

Is HDR400 Worth Turning On, Or Should I Leave HDR Off?

Asked by Augustin L.0 views

My monitor is HDR400 certified. When I turn on HDR, your HDR test looks only slightly brighter and games look dull or washed out. Is HDR400 worth using or is it better off?

Brand
Not stated
Model
Monitor
Connection
DisplayPort
System
Windows 11
Browser
Edge 149
Short Answer

HDR400 is an entry-level HDR certification. Many HDR400 monitors lack the brightness and local dimming needed for convincing HDR, so SDR often looks better. Try HDR with the Windows HDR Calibration app; if games still look flat, leave HDR off and use SDR.

Verified By Gamepad TesterVerified By Gamepad Tester
Devon Miller
Devon MillerVerified Gamepad Tester team memberGamepad Tester Team
Low Latency And Input Timing Engineer · 9+ years experience · Answered Jun 13, 2026

Many people with HDR400 monitors reach the same conclusion, so you are not doing anything wrong.

HDR needs two things to look impressive: high peak brightness for highlights, and deep blacks or local dimming for contrast. HDR400 means the monitor reaches around 400 nits, which is only modestly above many SDR monitors, and many HDR400 monitors have no local dimming. So HDR content does not get much extra punch, while tone mapping and the way Windows maps SDR content can make things look flatter.

That is why your HDR test looks only slightly brighter.

Try it properly once. Run the Windows HDR Calibration app so Windows knows your monitor's real limits, adjust the SDR content brightness slider in HDR settings, and test a few HDR games. Some games look better, especially with a good in-game HDR calibration screen.

If games still look dull compared with SDR, leave HDR off. A well set SDR picture is better than weak HDR. You can toggle HDR quickly with Windows key plus Alt plus B when you want to try a specific game.

For HDR that really stands out, look for higher certifications with local dimming, mini-LED or OLED in a future purchase.

Step By Step Fix
  1. Run the Windows HDR Calibration app.
  2. Adjust the SDR content brightness slider in Windows HDR settings.
  3. Test a few HDR games using their own HDR calibration screens.
  4. Compare with SDR and keep whichever looks better.
  5. Toggle HDR with Windows key plus Alt plus B when needed.

Tested on: Applies to HDR400 monitors on Windows 11. HDR settings per Microsoft's HDR settings guidance.

Checked by Calder Wright on . How we verify answers

Did this fix your controller?
Was this answer helpful?
Share this guide

Community Replies 3

  • Accepted Solution
    Mirabel StantonCommunity Member

    HDR400 looked worse than SDR on my monitor. I leave it off and I'm happier.

  • Augustin LemaireCommunity Member

    Calibration app helped a bit, but SDR still looks better in most games. HDR off, shortcut for the odd game.

  • Ritwik BanerjeeCommunity Member

    Upgraded to OLED later, then HDR finally made sense.

Add Your Reply

Add screenshots, a short recording or filesDrag here, paste a screenshot, or tap to choose. Up to 2 files, 8 MB each. JPG, JPEG, PNG, WEBP, GIF, TXT, LOG, PDF, JSON, MP4, WEBM
Devon Miller
Written and tested by

Devon MillerVerified Gamepad Tester team member

Low Latency And Input Timing Engineer at Gamepad Tester

Devon is a low latency engineer. On a browser-based latency test the easiest mistake is measuring the wrong thing: network round trips, render queues and browser throttling can all add milliseconds that have nothing to do with the controller. His work is isolating the input path so that what the test reports is the hardware delay, and documenting the conditions under which the reading is trustworthy. On Gamepad Tester he owns the latency test and the input lag topic, and checks any answer that quotes a millisecond figure.

Input latency measurementdata path isolationwired versus wireless delaybrowser timing accuracy
  • 27 answers on Gamepad Tester
  • 9+ years experience
  • Owns the input timing path behind this site's latency test and verifies the millisecond figures quoted in answers.
  • Reviewed by Calder Wright

The Team Behind These Answers

All 40 specialists

Each answer is written by the specialist who owns that part of the hardware, tested on a real controller, and checked by a second team member. How we verify answers

Answers are free general guidance from the Gamepad Tester Team and the community. Opening a controller or replacing a thumbstick module can void your warranty, so check the maker's support or warranty first. Battery and soldering work carries a real risk of damage or injury.

Free Controller Tests

Every test runs in your own browser with the Gamepad API. No sign up, no download, and your controller data never leaves your device.

All tools

Read Next On The Gamepad Tester Blog

All articles

Latest From The Community

The newest replies from players and the Gamepad Tester Team.

All guides