Why Sports Games Feel Better With a Controller
Ask a room full of sports gamers what they play with, and most will hold up an imaginary controller. Ask them why, and…
My L2 on the DualSense has started squeaking and feels a bit gritty, especially in games with adaptive trigger resistance. The trigger test shows it still goes from 0 to 1 smoothly. Is it damaged? Can I fix the noise?
If the trigger test still shows a smooth 0 to 1, the sensor is fine. Squeaks and grit come from dust or worn plastic on the trigger pivot or the adaptive trigger gears. Cleaning around the trigger often helps; avoid spraying oils or WD-40 into it.
Your trigger test result is reassuring: a smooth sweep from 0 to 1 means the trigger sensor is working properly. The noise is mechanical.
The DualSense triggers have more moving parts than most, because the adaptive trigger mechanism uses a small motor and gears to push back against your finger. Dust, crumbs or worn plastic around the trigger pivot or in that mechanism can cause squeaking and a gritty feel, and it shows most when resistance is active.
Start with the gentle fixes. Blow compressed air into the gaps around the trigger while working it through its full travel. If you are comfortable opening the controller, clean the trigger pivot and visible plastic surfaces with isopropyl alcohol.
Do not spray WD-40 or other oils into the trigger. They attract dust, can damage some plastics and can reach the sensor and the motor gears. If a lubricant is truly needed, a tiny amount of plastic-safe grease on the pivot only, applied with the controller open, is the safer route.
If the grit gets worse or the trigger starts catching, have the adaptive trigger mechanism checked; worn gears are a known repair.
Tested on: Applies to DualSense CFI-ZCT1W on Windows 11 with Edge or Chrome. Trigger values per the analog button values reported through the Gamepad API.
Checked by Camila Ferreira on . How we verify answers
Hardware Repair Educator at Gamepad Tester
Thiago teaches controller repair. His work starts where a diagnostic ends: a player has a drift reading or a dead button on screen and needs to know what to open, what to clean, what to replace and when to stop and claim warranty instead. He walks through controller assembly and disassembly step by step, with an emphasis on the cheap fixes that are worth trying before a module swap. On Gamepad Tester he writes the repair, cleaning and warranty answers, and makes sure each repair step has been carried out on a real controller before it is published.
Each answer is written by the specialist who owns that part of the hardware, tested on a real controller, and checked by a second team member. How we verify answers
Answers are free general guidance from the Gamepad Tester Team and the community. Opening a controller or replacing a thumbstick module can void your warranty, so check the maker's support or warranty first. Battery and soldering work carries a real risk of damage or injury.
Every test runs in your own browser with the Gamepad API. No sign up, no download, and your controller data never leaves your device.
Ask a room full of sports gamers what they play with, and most will hold up an imaginary controller. Ask them why, and…
There is a particular kind of bad session that never gets diagnosed. You lose a duel you should have won. Your car…
World of Warcraft Classic is built around smart decisions. Your class, spec, talents, gear, keybinds, and reaction…
The newest replies from players and the Gamepad Tester Team.