How To Protect A Basement Gaming Setup From Storm Flooding
The basement is the obvious place to put a gaming room. It is cooler, it is quieter, nobody complains about the noise…
Found my spare DualSense after about 6 months in a drawer and it's completely dead. No light when I press PS, no light when plugged in. Tried two cables. Is the battery ruined from sitting? Your tester obviously sees nothing.
A controller stored for months can drain so far that it shows no light at first. Leave it on a known-good USB port or the PS5 for at least 30 to 60 minutes, then try the reset button. Most recover; a battery that never takes charge needs replacing.
Do not give up on it yet. Lithium-ion batteries slowly self-discharge in storage, and a controller left for months can drop so low that its charging circuit takes a while to wake up. During that time there may be no light at all, which looks exactly like a dead controller.
The fix is patience with the right power source. Plug it into the PS5 itself or a computer USB port, not a weak phone charger or a hub, and leave it for at least 30 to 60 minutes before judging. Use a cable you know carries data and charges other devices properly.
If it still shows nothing, press the reset button in the small hole on the back near the Sony logo for about 5 seconds with a pin while it is plugged in, then press PS.
Most controllers come back this way. If it lights up but dies quickly afterwards, the battery has lost capacity during the deep discharge and a battery replacement is the repair. If it never shows a light on any port after a long charge, the battery or charging board has failed.
For next time, store spare controllers part-charged and top them up every few months.
Tested on: Applies to DualSense CFI-ZCT1W on PS5 and Windows PCs. Reset procedure per Sony's DualSense troubleshooting page.
Checked by Thiago Alves on . How we verify answers
Hardware QA Lead at Gamepad Tester
Sneha leads manual hardware QA. Her lab takes controllers that arrive with no published specifications, mostly budget and mobile pads, and puts each one through the same fixed set of checks: every button and axis registers, deadzones are inside tolerance, rumble motors both run, the battery holds its claimed runtime, and the pad still passes after a charge cycle or two. Pads that fail are documented rather than quietly dropped. On Gamepad Tester she reviews the answers about cheap controllers behaving unpredictably and about battery and charging faults.
Each answer is written by the specialist who owns that part of the hardware, tested on a real controller, and checked by a second team member. How we verify answers
Answers are free general guidance from the Gamepad Tester Team and the community. Opening a controller or replacing a thumbstick module can void your warranty, so check the maker's support or warranty first. Battery and soldering work carries a real risk of damage or injury.
Every test runs in your own browser with the Gamepad API. No sign up, no download, and your controller data never leaves your device.
The basement is the obvious place to put a gaming room. It is cooler, it is quieter, nobody complains about the noise…
Long gaming sessions quickly expose controller flaws like fatigue, stick drift, wireless latency, and inconsistent…
Whether you're a casual gamer or a competitive player, a malfunctioning controller can ruin your gaming experience…
The newest replies from players and the Gamepad Tester Team.