Skip to main content

Gamepad Tester

AnsweredVerified By Gamepad TesterVerified By Gamepad Tester

My Mouse Drops Things When I Drag, The Click Lets Go By Itself

Asked by Toby G.0 views

When I drag files or hold left click in games, the click sometimes lets go on its own even though I'm still holding it. Files drop in the wrong folder and I stop firing in games. On your mouse test, holding left click shows little gaps where it releases and presses again. What is it?

Brand
Not stated
Model
Gaming mouse
Connection
USB Receiver
System
Windows 11
Browser
Chrome 151
Short Answer

That is the left button switch failing to hold contact, usually from wear or dust. It is the same fault that causes double clicks. Compressed air sometimes helps; the lasting fix is a switch replacement, warranty or a new mouse.

Verified By Gamepad TesterVerified By Gamepad Tester
Venom’s Tech (Abhishek)
Venom’s Tech (Abhishek)Verified Gamepad Tester team memberGamepad Tester Team
Peripheral Reviewer And Tech Journalist · 8+ years experience · Answered Aug 4, 2026

The gaps you see in the mouse test are exactly the fault. When you hold the button, the switch should stay closed the whole time. A worn or dirty switch can briefly lose contact while held, so the computer sees release then press. During a drag, that release drops the file; in a game, firing stops.

It is the same family of fault as unwanted double clicks, and often appears alongside it. Mouse switches have a finite life, and the left button wears first.

Try the quick things first. Blow compressed air into the gap around the left button while clicking it repeatedly; dust is sometimes the cause. For wireless mice, also make sure the receiver is close, since signal drops can look similar, though they usually affect movement too.

To confirm, hold left click for 10 seconds in the mouse test a few times. Any gap means the switch is not holding. Then try the mouse on another computer. If it follows the mouse, it is hardware.

The lasting fixes are warranty, replacing the switch if you are comfortable soldering, or a new mouse. Mice with optical switches avoid this type of wear.

Step By Step Fix
  1. Hold left click for 10 seconds in the mouse test several times and look for gaps.
  2. Blow compressed air around the left button while clicking it.
  3. For wireless mice, move the receiver closer and test again.
  4. Test on another computer to confirm the fault follows the mouse.
  5. Use the warranty, replace the switch, or consider a mouse with optical switches.

Tested on: Applies to wired and wireless mice on Windows 11 with Chrome or Edge. Button events per standard browser mouse events.

Checked by Oliver Sterling on . How we verify answers

Did this fix your controller?
Was this answer helpful?
Share this guide

Community Replies 3

  • Accepted Solution
    Harvey LintonCommunity Member

    Same symptoms on my old mouse, double clicks started a week later. Switch was done.

  • Toby GrimshawCommunity Member

    Gaps every few seconds in the hold test, and it follows the mouse. Warranty claim accepted with a screenshot.

  • Kunal ThakurCommunity Member

    Optical switch mouse since then, no issues in two years.

Add Your Reply

Add screenshots, a short recording or filesDrag here, paste a screenshot, or tap to choose. Up to 2 files, 8 MB each. JPG, JPEG, PNG, WEBP, GIF, TXT, LOG, PDF, JSON, MP4, WEBM
Venom’s Tech (Abhishek)
Written and tested by

Venom’s Tech (Abhishek)Verified Gamepad Tester team member

Peripheral Reviewer And Tech Journalist at Gamepad Tester

Abhishek, known to his audience as Venom's Tech, is a tech journalist and peripheral reviewer who works at the budget end of the market, where quality control varies the most. He specialises in granular teardowns and comparisons of mobile clip-on controllers, cheap third-party pads and the stick modules inside them, which is where drift tends to appear first and earliest. On Gamepad Tester he covers the reviews and buying topic for mobile and budget hardware, and checks answers about third-party pads that behave differently from a first-party controller.

Mobile controllersbudget and third-party padsstick drift in clone hardwareperipheral teardowns
  • 15 answers on Gamepad Tester
  • 8+ years experience
  • Tests and reviews mobile and budget controllers hands-on, including teardowns of their stick modules.
  • Reviewed by Oliver Sterling

The Team Behind These Answers

All 40 specialists

Each answer is written by the specialist who owns that part of the hardware, tested on a real controller, and checked by a second team member. How we verify answers

Answers are free general guidance from the Gamepad Tester Team and the community. Opening a controller or replacing a thumbstick module can void your warranty, so check the maker's support or warranty first. Battery and soldering work carries a real risk of damage or injury.

Free Controller Tests

Every test runs in your own browser with the Gamepad API. No sign up, no download, and your controller data never leaves your device.

All tools

Read Next On The Gamepad Tester Blog

All articles

Latest From The Community

The newest replies from players and the Gamepad Tester Team.

All guides