Skip to main content

Gamepad Tester

AnsweredVerified By Gamepad TesterVerified By Gamepad Tester

My Xbox Controller Keeps Flashing And Will Not Connect To My Xbox

Asked by Megan H.0 views

My Xbox Series controller's Xbox button just keeps flashing and never connects to my Xbox Series S. It used to work. I used it on my PC over Bluetooth last week. How do I get it back on the console?

Brand
Microsoft
Model
Xbox Wireless Controller Model 1914
Connection
Xbox Wireless Adapter
System
Xbox Series S
Browser
Chrome 149
Detected Controller
Xbox Wireless Controller
Buttons And Axes
17 buttons, 6 axes
Test used in this questionConnection Stability TestWatch for dropouts and check wireless signal stability
Open Free Test
Short Answer

A flashing Xbox button means the controller is searching for the device it was last paired with. Connect it to the console with a USB cable, or press the pair button on the console and then hold the controller's pair button until they sync.

Verified By Gamepad TesterVerified By Gamepad Tester
Tyler Vance
Tyler VanceVerified Gamepad Tester team memberGamepad Tester Team
QA And Test Automation Lead · Answered Jun 19, 2026

The flashing means the controller is looking for a device it knows and cannot find it. Since you last used it on your PC, it may be searching for the PC.

The quickest fix is a USB cable. Plug the controller into the console with a USB-C cable and press the Xbox button. The console pairs it again, and you can unplug the cable afterwards.

The wireless way works too. Press the pair button on the console; on the Series S it is on the front. The console's light flashes. Then hold the small pair button on top of the controller until the Xbox button flashes quickly. When they find each other, the Xbox button stays lit.

If you switch often between the console and PC Bluetooth, double tapping the controller's pair button switches between the last console connection and the last Bluetooth device, which avoids re-pairing.

If it still keeps flashing, try fresh batteries, since a low battery can stop it connecting, and update the controller's firmware once it is connected.

Step By Step Fix
  1. Connect the controller to the console with a USB-C cable and press the Xbox button.
  2. Or press the console's pair button, then hold the controller's pair button until it flashes quickly.
  3. Wait for the Xbox button to stay lit.
  4. Double tap the pair button in future to switch between the console and your PC's Bluetooth.
  5. If it keeps flashing, try fresh batteries and update the firmware.

Tested on: Applies to Xbox Wireless Controller Model 1914 with Xbox Series X|S consoles. Pairing per Xbox support's controller connection guide.

Checked by Liam Davies on . How we verify answers

Did this fix your controller?
Was this answer helpful?
Share this guide

Community Replies 3

  • Accepted Solution
    Kyle RennieCommunity Member

    USB cable and press the Xbox button, done in five seconds.

  • Megan HaverstockCommunity Member

    Plugged it in and it paired straight away. Using the double tap trick now for PC. Thanks!

  • Sagar KulkarniCommunity Member

    Low batteries stopped mine pairing once. Fresh ones and it connected.

Add Your Reply

Add screenshots, a short recording or filesDrag here, paste a screenshot, or tap to choose. Up to 2 files, 8 MB each. JPG, JPEG, PNG, WEBP, GIF, TXT, LOG, PDF, JSON, MP4, WEBM
Tyler Vance
Written and tested by

Tyler VanceVerified Gamepad Tester team member

QA And Test Automation Lead at Gamepad Tester

Tyler leads test automation. Before each change to the tools here goes live, his pipelines drive simulated inputs through the pages across multiple browsers and desktop environments and compare the readings against known-good baselines. It catches the regressions manual testing misses: a button index that shifts, an axis that stops updating, a layout that breaks at one viewport. On Gamepad Tester he signs off releases of the test tools and handles the answers where the tool itself, rather than the controller, is behaving oddly.

Browser test automationregression baselinessimulated input pipelinescross-environment QA
  • 25 answers on Gamepad Tester
  • Runs the automated regression suite that every change to these test tools passes before release.
  • Reviewed by Liam Davies

The Team Behind These Answers

All 40 specialists

Each answer is written by the specialist who owns that part of the hardware, tested on a real controller, and checked by a second team member. How we verify answers

Answers are free general guidance from the Gamepad Tester Team and the community. Opening a controller or replacing a thumbstick module can void your warranty, so check the maker's support or warranty first. Battery and soldering work carries a real risk of damage or injury.

Free Controller Tests

Every test runs in your own browser with the Gamepad API. No sign up, no download, and your controller data never leaves your device.

All tools

Read Next On The Gamepad Tester Blog

All articles

Latest From The Community

The newest replies from players and the Gamepad Tester Team.

All guides