Skip to main content

Gamepad Tester

AnsweredVerified By Gamepad TesterVerified By Gamepad Tester

Sound From My TV Soundbar Is Out Of Sync With The Picture

Asked by Holly P.0 views

Voices on my TV come a fraction after people's lips move since I added a soundbar over HDMI. The TV speakers alone were fine. Your sound test can't show sync, but it's very noticeable in films. How do I fix it?

Brand
Not stated
Model
TV with HDMI soundbar
Connection
HDMI
System
Smart TV
Browser
Chrome 149
Short Answer

Lip sync problems with soundbars come from processing delays between the TV and soundbar. Use the TV or soundbar's audio delay or lip sync setting, try PCM output instead of passthrough, and make sure the soundbar is on the ARC or eARC port with the latest firmware.

Verified By Gamepad TesterVerified By Gamepad Tester
Simon Fletcher
Simon FletcherVerified Gamepad Tester team memberGamepad Tester Team
Browser Compatibility Tester · 24+ years experience · Answered Jun 25, 2026

Adding a soundbar adds a processing step, and the TV and soundbar do not always agree on timing. The result is exactly what you see: picture and voices slightly apart.

Most TVs and soundbars have a fix built in. Look in the TV's sound settings and the soundbar's settings for audio delay, AV sync or lip sync. Adjust it while watching someone speak until it looks natural. Usually you want the audio slightly earlier or the picture slightly later, depending on how the setting is labelled.

Check the connection. The soundbar should be on the TV's HDMI ARC or eARC port. eARC handles sync information better on supported equipment.

Try changing the TV's digital audio output format. Passthrough or bitstream sends surround formats for the soundbar to decode, which can add delay. PCM lets the TV decode first, sometimes improving sync at the cost of some surround formats.

Update both the TV and soundbar firmware; sync issues are often fixed in updates. And if a film mode or picture processing setting adds delay to the picture, game or low latency modes change timing too, so set sync after choosing your picture mode.

Step By Step Fix
  1. Connect the soundbar to the TV's HDMI ARC or eARC port.
  2. Find the audio delay or lip sync setting on the TV or soundbar and adjust it while watching dialogue.
  3. Try PCM digital audio output instead of passthrough.
  4. Update the TV and soundbar firmware.
  5. Re-check sync after changing picture modes.

Tested on: Applies to TVs with HDMI ARC or eARC soundbars. Settings names vary by manufacturer.

Checked by Devon Miller on . How we verify answers

Did this fix your controller?
Was this answer helpful?
Share this guide

Community Replies 3

  • Accepted Solution
    Glyn BarrowCommunity Member

    Lip sync setting on my soundbar sorted it in a minute.

  • Holly Pemberton-AshCommunity Member

    PCM output plus a small delay adjustment and voices match now. Thank you!

  • Kartikeya SinghCommunity Member

    Firmware update for my soundbar fixed sync completely.

Add Your Reply

Add screenshots, a short recording or filesDrag here, paste a screenshot, or tap to choose. Up to 2 files, 8 MB each. JPG, JPEG, PNG, WEBP, GIF, TXT, LOG, PDF, JSON, MP4, WEBM
Simon Fletcher
Written and tested by

Simon FletcherVerified Gamepad Tester team member

Browser Compatibility Tester at Gamepad Tester

Simon audits browser compatibility. The Gamepad API is implemented unevenly: a DualSense exposes adaptive triggers and haptics in one browser and not another, button indexes shift between engines, and Safari and Chrome disagree on when a controller becomes visible to a page. He tests each release of the tools here across Chromium and WebKit builds and documents the differences instead of hiding them. On Gamepad Tester he handles the questions where a controller works in one browser but not another, and reviews the rumble and haptics answers.

Browser engine differencesChromium and WebKit testingGamepad API supporthaptics and adaptive triggers
  • 19 answers on Gamepad Tester
  • 24+ years experience
  • Tests each release of these tools across Chromium and WebKit browsers and documents the differences.
  • Reviewed by Devon Miller

The Team Behind These Answers

All 40 specialists

Each answer is written by the specialist who owns that part of the hardware, tested on a real controller, and checked by a second team member. How we verify answers

Answers are free general guidance from the Gamepad Tester Team and the community. Opening a controller or replacing a thumbstick module can void your warranty, so check the maker's support or warranty first. Battery and soldering work carries a real risk of damage or injury.

Free Controller Tests

Every test runs in your own browser with the Gamepad API. No sign up, no download, and your controller data never leaves your device.

All tools

Read Next On The Gamepad Tester Blog

All articles

Latest From The Community

The newest replies from players and the Gamepad Tester Team.

All guides