Skip to main content

Gamepad Tester

AnsweredVerified By Gamepad TesterVerified By Gamepad Tester

What Controller Deadzone Settings Should I Use In Rocket League?

Asked by Oscar P.0 views

Rocket League has controller deadzone and dodge deadzone settings and I don't know what to set. My stick rests at 0.02 on your drift test. What do these do and what values make sense?

Brand
Microsoft
Model
Xbox Wireless Controller Model 1914
Connection
USB-C Cable
System
Windows 11
Browser
Chrome 152
Detected Controller
Xbox Wireless Controller
Buttons And Axes
17 buttons, 6 axes
Test used in this questionJoystick Deadzone TestMeasure and calibrate the deadzone on both analog sticks
Open Free Test
Short Answer

Controller deadzone ignores small stick movements near centre; set it just above your measured resting value so drift is ignored but small inputs work. Dodge deadzone decides how far you push the stick before a jump becomes a flip; a moderate value reduces accidental flips. Start from your drift test result.

Verified By Gamepad TesterVerified By Gamepad Tester
Elena Rostova
Elena RostovaVerified Gamepad Tester team memberGamepad Tester Team
Hardware Diagnostics Engineer · 7+ years experience · Answered Sep 21, 2026

Your 0.02 resting value is a great starting point, because it tells you how low you can safely go.

Controller deadzone. This is the area around the centre where the game ignores stick movement. Too high, and small steering adjustments are lost, which makes aerial control feel sluggish. Too low, and drift or noise makes the car creep. Set it just above your measured resting value. With 0.02 at rest, a small deadzone a little above that removes any creep without hiding small inputs. If the drift test later shows a higher value, raise the deadzone to match.

Dodge deadzone. This decides how far you must push the stick for a second jump to become a flip or dodge instead of a straight double jump. Low values make flips trigger easily, which helps quick flips but causes accidental flips when you meant to double jump. Higher values make flips more deliberate. Many players use a moderate value and adjust after practice.

The joystick deadzone test helps here: push the stick slowly and see at what value small movements begin. Combine that with practice in free play and adjust one setting at a time.

Step By Step Fix
  1. Run the stick drift test and note your resting value.
  2. Set the controller deadzone just above that value.
  3. Start the dodge deadzone at a moderate value.
  4. Practise aerials and flips in free play and adjust one setting at a time.
  5. Re-test your stick monthly and raise the deadzone if the resting value grows.

Tested on: Applies to Xbox and PlayStation controllers with Rocket League on Windows 11. Readings per our joystick deadzone and drift tests.

Checked by Nadia Brooks on . How we verify answers

Did this fix your controller?
Was this answer helpful?
Share this guide

Community Replies 3

  • Accepted Solution
    Callum BeresfordCommunity Member

    Measuring my stick first and setting deadzone just above it was so much better than copying pros.

  • Oscar PendletonCommunity Member

    Set deadzone just above 0.02 and raised dodge deadzone a bit. No more accidental flips.

  • Advait KulkarniCommunity Member

    Remember to recheck as the controller ages, mine needed a bump after a year.

Add Your Reply

Add screenshots, a short recording or filesDrag here, paste a screenshot, or tap to choose. Up to 2 files, 8 MB each. JPG, JPEG, PNG, WEBP, GIF, TXT, LOG, PDF, JSON, MP4, WEBM
Elena Rostova
Written and tested by

Elena RostovaVerified Gamepad Tester team member

Hardware Diagnostics Engineer at Gamepad Tester

Elena is a hardware diagnostics engineer working on competitive gaming peripherals. She designs test benches that put a number on the faults players usually describe by feel: outer deadzone error, circularity variance, uneven travel between the left and right stick, and the drift that appears only after a pad has warmed up. Her work covers custom and pro-tier hardware such as the Xbox Elite range and SCUF-style builds, where small geometry errors decide whether a shot lands. On Gamepad Tester she writes and checks the answers about deadzone readings and stick accuracy, and confirms a fix on real hardware before it is published.

Outer deadzone errorstick circularitycontroller test benchespro and custom controllersmechanical tolerance
  • 16 answers on Gamepad Tester
  • 7+ years experience
  • Designs and runs the bench tests used to verify deadzone and stick accuracy answers on this site.
  • Reviewed by Nadia Brooks

The Team Behind These Answers

All 40 specialists

Each answer is written by the specialist who owns that part of the hardware, tested on a real controller, and checked by a second team member. How we verify answers

Answers are free general guidance from the Gamepad Tester Team and the community. Opening a controller or replacing a thumbstick module can void your warranty, so check the maker's support or warranty first. Battery and soldering work carries a real risk of damage or injury.

Free Controller Tests

Every test runs in your own browser with the Gamepad API. No sign up, no download, and your controller data never leaves your device.

All tools

Read Next On The Gamepad Tester Blog

All articles

Latest From The Community

The newest replies from players and the Gamepad Tester Team.

All guides