Skip to main content

Gamepad Tester

AnsweredVerified By Gamepad TesterVerified By Gamepad Tester

What Does Delta E Mean In Monitor Colour Accuracy Reviews?

Asked by Cornelius T.0 views

Monitor reviews keep quoting Delta E values like 0.8 or 2.5. What does it actually measure, and what number is good enough? Can your colour accuracy test show it?

Brand
Various
Model
General question
Connection
Not Sure
System
Windows 11
Browser
Chrome 144
Short Answer

Delta E measures how far a displayed colour is from the colour it should be. Lower is better: under about 1 is essentially invisible, under 2 is very good, and around 3 or more can be noticeable to trained eyes. Measuring it needs a colorimeter; a browser test lets you judge colours by eye, not measure Delta E.

Verified By Gamepad TesterVerified By Gamepad Tester
Arjun Mehta
Arjun MehtaVerified Gamepad Tester team memberGamepad Tester Team
Calibration And Signal Processing Programmer · Answered Jan 30, 2026

Delta E, written as ΔE, is a single number for colour error: how different the colour the monitor shows is from the colour it was asked to show. Reviewers measure many colours with a colorimeter and report the average and the worst case.

As a rough guide: below about 1, the difference is effectively invisible. Below 2 is very good and suitable for most colour work. Around 2 to 3 is good for general use and visible mainly to trained eyes side by side. Above about 3 to 5, differences become noticeable, such as skin tones looking slightly off.

A few points help when reading reviews. Check which mode was measured, since an sRGB mode may score far better than the monitor's default vivid mode. Look at the maximum as well as the average. And note whether it was measured before or after calibration.

A browser test cannot measure Delta E, because the browser does not know what your eyes or a sensor see. What our colour accuracy test does is show reference colours, skin tones and greys so you can judge by eye whether anything looks clearly off, such as oversaturated reds or tinted greys. For actual numbers, a hardware colorimeter is needed.

Step By Step Fix
  1. Check reviews for the average and maximum Delta E in the mode you will use.
  2. Treat under 2 as very good and under 1 as excellent.
  3. Use the colour accuracy test to spot obvious problems by eye.
  4. Use a hardware colorimeter if you need measured accuracy.

Tested on: General explanation of Delta E as used in display reviews. Browser tests support visual checks, not measurement.

Checked by Rebecca Wright on . How we verify answers

Did this fix your controller?
Was this answer helpful?
Share this guide

Community Replies 3

  • Accepted Solution
    Imelda RowcroftCommunity Member

    Reviews measuring the sRGB mode separately helped me pick a monitor with good accuracy out of the box.

  • Cornelius TateCommunity Member

    So under 2 is what I want for photo editing. And the browser test is for spotting obvious issues. Clear, thanks.

  • Prasanna KumarCommunity Member

    Max Delta E matters, one bad colour can annoy you more than a good average.

Add Your Reply

Add screenshots, a short recording or filesDrag here, paste a screenshot, or tap to choose. Up to 2 files, 8 MB each. JPG, JPEG, PNG, WEBP, GIF, TXT, LOG, PDF, JSON, MP4, WEBM
Arjun Mehta
Written and tested by

Arjun MehtaVerified Gamepad Tester team member

Calibration And Signal Processing Programmer at Gamepad Tester

Arjun writes the maths between a controller and the screen. A raw axis value is noisy, unscaled and centred imperfectly, so his filters handle the parts that decide whether a test is useful: removing sensor noise without hiding a genuine fault, normalising ranges across controllers that report differently, and plotting the result as a clean graph where real drift is visible and jitter is not mistaken for it. On Gamepad Tester he maintains the calibration maths in the deadzone and drift tests, and explains in answers what a given reading does and does not prove.

Signal filteringaxis normalisationcalibration mathsdrift versus noisedata visualisation
  • 22 answers on Gamepad Tester
  • Maintains the calibration and filtering maths behind the deadzone, drift and trigger readings shown on this site.
  • Reviewed by Rebecca Wright

The Team Behind These Answers

All 40 specialists

Each answer is written by the specialist who owns that part of the hardware, tested on a real controller, and checked by a second team member. How we verify answers

Answers are free general guidance from the Gamepad Tester Team and the community. Opening a controller or replacing a thumbstick module can void your warranty, so check the maker's support or warranty first. Battery and soldering work carries a real risk of damage or injury.

Free Controller Tests

Every test runs in your own browser with the Gamepad API. No sign up, no download, and your controller data never leaves your device.

All tools

Read Next On The Gamepad Tester Blog

All articles

Latest From The Community

The newest replies from players and the Gamepad Tester Team.

All guides