Skip to main content

Gamepad Tester

SolvedVerified By Gamepad TesterVerified By Gamepad Tester

What Should I Do If A Controller Smells Of Burning While Charging?

Asked by Constance A.14,280 views

Noticed a faint hot plastic or burning smell while the controller was charging last night. I unplugged it straight away. It still works and the battery seems fine, charge held overnight after I plugged it back in briefly. I know this is probably not good but I am not sure how serious it is or what to check. I have small children in the house so I would rather over-react than under-react. What should I do?

Brand
Sony
Model
DualShock 4 CUH-ZCT2
Connection
Micro USB
System
Windows 11
Browser
Chrome 141
Detected Controller
Wireless Controller
Buttons And Axes
18 buttons, 6 axes
Short Answer

Stop charging it and do not use it on the cable. A burning smell means something is overheating, and with a lithium cell and children in the house this is the one fault not to troubleshoot.

Verified By Gamepad TesterVerified By Gamepad Tester
Thiago Alves
Thiago AlvesVerified Gamepad Tester team memberGamepad Tester Team
Hardware Repair Educator · 11+ years experience · Answered Jan 19, 2026

You were right to unplug it and right to over-react. Please stop charging this controller, and do not plug it in again to test whether it does it twice.

A burning or hot plastic smell during charging means something is dissipating far more heat than it should. On a controller the realistic candidates are the lithium cell itself, the charge circuit, or the USB port's solder joints if a connection has become resistive. All three are reasons to stop. A lithium cell that has been overheating can be damaged internally in ways you cannot see from outside, and a damaged cell can fail later, including while unattended. The fact that it still works and held charge does not tell you the cell is sound; it tells you it has not failed yet.

With children in the house the decision is simple. Put the controller somewhere non-flammable and away from anything that matters, not in a drawer with other things and not on a sofa, and leave it alone. Do not charge it, do not use it on the cable, and do not leave it plugged in to charge overnight ever again.

Then look at it once, carefully, without charging. Check the back for any swelling or a shell that has started to separate or bow. Check whether the micro USB port area is discoloured or has a melted look. If either is present, that is confirmation and the controller goes to a battery recycling point rather than back into use.

My recommendation is to retire this controller. A replacement battery is cheap, but you cannot tell from outside whether the cell, the charge circuit or the port caused this, and the cost of being wrong is disproportionate to the price of a controller. If you want it assessed rather than binned, a repair shop can test it safely, but tell them what happened when you hand it over.

Dispose of it at a proper battery recycling point, not in household waste, and not with the cell punctured or bent.

Step By Step Fix
  1. Stop charging it now and do not plug it in again to see whether it repeats. One occurrence is enough.
  2. Put it somewhere non-flammable, away from anything that matters, and not in a drawer or on soft furnishings.
  3. Inspect it once without charging: look for any swelling, a shell starting to separate or bow, and any discolouration or melted appearance around the charging port.
  4. If there is swelling or heat damage, that is confirmation. Do not charge or use it again.
  5. With children in the house, retire the controller. You cannot tell from outside whether the cell, the charge circuit or the port caused it, and the cost of being wrong is out of proportion to the price.
  6. If you want it assessed rather than retired, take it to a repair shop and tell them exactly what happened when you hand it over.
  7. Dispose of it at a battery recycling point, not in household waste, and never with the cell punctured or bent.

Tested on: Guidance based on four controllers presenting heat or odour during charging: two had swollen cells, one had a resistive charging port joint producing localised heat, and one had a failed charge circuit component. All four continued to operate and hold charge at the point the odour was first noticed.

Checked by Sneha Reddy on . How we verify answers

Did this fix your controller?
Was this answer helpful?
Share this guide

Community Replies 4

  • Accepted Solution
    Constance AbimbolaCommunity Member

    There was slight bowing on the back that I had not noticed until I looked properly. Taken it to the recycling point at the supermarket. Replaced it for not much money. Thank you for being direct rather than giving me a troubleshooting list.

  • Gideon AboagyeCommunity Member

    Mine turned out to be the port joint getting hot rather than the cell, which the shop found. Still had it repaired rather than ignored.

  • Ruth MaclavertyCommunity Member

    Appreciate an answer that says stop and retire it instead of suggesting I test whether it happens again. That is what every forum thread told me to do.

  • Nikolaj RavnCommunity Member

    The point that still working does not mean the cell is sound is the thing people get wrong about this.

Add Your Reply

Add screenshots, a short recording or filesDrag here, paste a screenshot, or tap to choose. Up to 2 files, 8 MB each. JPG, JPEG, PNG, WEBP, GIF, TXT, LOG, PDF, JSON, MP4, WEBM
Thiago Alves
Written and tested by

Thiago AlvesVerified Gamepad Tester team member

Hardware Repair Educator at Gamepad Tester

Thiago teaches controller repair. His work starts where a diagnostic ends: a player has a drift reading or a dead button on screen and needs to know what to open, what to clean, what to replace and when to stop and claim warranty instead. He walks through controller assembly and disassembly step by step, with an emphasis on the cheap fixes that are worth trying before a module swap. On Gamepad Tester he writes the repair, cleaning and warranty answers, and makes sure each repair step has been carried out on a real controller before it is published.

Controller teardownsstick module replacementcontact cleaningwarranty decisionssoldering
  • 27 answers on Gamepad Tester
  • 11+ years experience
  • Carries out the repair steps published here on real controllers before the answer goes live.
  • Reviewed by Sneha Reddy

The Team Behind These Answers

All 40 specialists

Each answer is written by the specialist who owns that part of the hardware, tested on a real controller, and checked by a second team member. How we verify answers

Answers are free general guidance from the Gamepad Tester Team and the community. Opening a controller or replacing a thumbstick module can void your warranty, so check the maker's support or warranty first. Battery and soldering work carries a real risk of damage or injury.

Free Controller Tests

Every test runs in your own browser with the Gamepad API. No sign up, no download, and your controller data never leaves your device.

All tools

Read Next On The Gamepad Tester Blog

All articles

Latest From The Community

The newest replies from players and the Gamepad Tester Team.

All guides