Skip to main content

Gamepad Tester

AnsweredVerified By Gamepad TesterVerified By Gamepad Tester

Why Does My Stick Drift Reading Look Different On My Phone And My PC?

Asked by Imogen F.0 views

I tested my PS4 controller on your drift test on my PC and the left stick rests at 0.05. On my Android phone over Bluetooth it shows 0.02 or sometimes 0.00. Which one is right?

Brand
Sony
Model
DualShock 4 CUH-ZCT2
Connection
Bluetooth
System
Android 16
Browser
Chrome Mobile 146
Detected Controller
Wireless Controller
Buttons And Axes
18 buttons, 6 axes
Test used in this questionStick Drift TestDetect unwanted stick movement while you keep your hands off
Open Free Test
Short Answer

Both can be right. Different devices and connections can process stick data differently, and some apply small deadzones or rounding before the browser sees it. The higher reading on PC is the more revealing one for tracking wear.

Verified By Gamepad TesterVerified By Gamepad Tester
Elena Rostova
Elena RostovaVerified Gamepad Tester team memberGamepad Tester Team
Hardware Diagnostics Engineer · 7+ years experience · Answered Mar 13, 2026

It is reasonable to see small differences, and neither device is lying.

A browser shows what the operating system passes on from the controller. Different systems and connections handle controller data a little differently. Some Android versions and drivers apply their own small deadzone or round tiny values to zero before the browser sees them. USB and Bluetooth reports can also differ slightly in how the same controller's values are packaged.

So when the phone shows 0.00 to 0.02 and the PC shows 0.05, the phone is probably hiding some of the offset, not showing a healthier stick.

For tracking wear, pick one setup and stick with it: the same device, the same connection, the same browser. The setup that shows more detail, here your PC, is better for spotting early drift. Compare readings over weeks on that same setup rather than between devices.

At 0.05 you are in the early stage. It is not a problem in most games yet, but worth a clean and a monthly check.

Step By Step Fix
  1. Choose one device, connection and browser for regular drift checks.
  2. Use the setup that shows the most detail, often a PC over USB.
  3. Run the drift test untouched for 30 seconds and log the value monthly.
  4. Clean the stick if it reads above about 0.04 and re-test.
  5. Compare readings over time on the same setup, not across devices.

Tested on: Applies to controllers tested on Android, Windows and other platforms in Chrome. Values per the W3C Gamepad specification.

Checked by Arjun Mehta on . How we verify answers

Did this fix your controller?
Was this answer helpful?
Share this guide

Community Replies 3

  • Accepted Solution
    Jonty GravesCommunity Member

    Same here, my phone always shows less. PC is my official drift checker now.

  • Imogen FairweatherCommunity Member

    Makes sense. Sticking with PC over USB for monthly checks. Cleaned it and it's 0.03 now.

  • Rishi VyasCommunity Member

    Bluetooth versus cable also changed mine slightly on the same PC.

Add Your Reply

Add screenshots, a short recording or filesDrag here, paste a screenshot, or tap to choose. Up to 2 files, 8 MB each. JPG, JPEG, PNG, WEBP, GIF, TXT, LOG, PDF, JSON, MP4, WEBM
Elena Rostova
Written and tested by

Elena RostovaVerified Gamepad Tester team member

Hardware Diagnostics Engineer at Gamepad Tester

Elena is a hardware diagnostics engineer working on competitive gaming peripherals. She designs test benches that put a number on the faults players usually describe by feel: outer deadzone error, circularity variance, uneven travel between the left and right stick, and the drift that appears only after a pad has warmed up. Her work covers custom and pro-tier hardware such as the Xbox Elite range and SCUF-style builds, where small geometry errors decide whether a shot lands. On Gamepad Tester she writes and checks the answers about deadzone readings and stick accuracy, and confirms a fix on real hardware before it is published.

Outer deadzone errorstick circularitycontroller test benchespro and custom controllersmechanical tolerance
  • 16 answers on Gamepad Tester
  • 7+ years experience
  • Designs and runs the bench tests used to verify deadzone and stick accuracy answers on this site.
  • Reviewed by Arjun Mehta

The Team Behind These Answers

All 40 specialists

Each answer is written by the specialist who owns that part of the hardware, tested on a real controller, and checked by a second team member. How we verify answers

Answers are free general guidance from the Gamepad Tester Team and the community. Opening a controller or replacing a thumbstick module can void your warranty, so check the maker's support or warranty first. Battery and soldering work carries a real risk of damage or injury.

Free Controller Tests

Every test runs in your own browser with the Gamepad API. No sign up, no download, and your controller data never leaves your device.

All tools

Read Next On The Gamepad Tester Blog

All articles

Latest From The Community

The newest replies from players and the Gamepad Tester Team.

All guides