Skip to main content

Gamepad Tester

AnsweredVerified By Gamepad TesterVerified By Gamepad Tester

GameCube Controller On PC Through An Adapter, The Test Sees It In One Mode But Not The Other

Asked by Jacob W.0 views

I have a 4 port Mayflash GameCube adapter with a switch on the back. In PC mode your tester sees it but the buttons are in weird places and the triggers show up as axes instead of buttons. In Wii U mode, which is what everyone says to use for Dolphin, the tester sees nothing at all. Is my adapter faulty? I want to check all the buttons on my old GameCube controllers before I use them for Melee in Dolphin.

GameCube Controller On PC Through An Adapter, The Test Sees It In One Mode But Not The Other.GameCube Controller On PC Through An Adapter, The Test Sees It In One Mode But Not The OtherGameCube Controller On PC Through An Adapter The Test Sees It In One Mode But Not The Other
Brand
Mayflash
Model
GameCube Controller Adapter (4 port)
Connection
USB-A
System
Windows 11
Browser
Chrome 151
Detected Controller
GameCube Controller Adapter
Test used in this questionGamepad TesterLive test of every button, stick, trigger and axis on any controller
Open Free Test
Short Answer

Your adapter is behaving correctly. In PC mode it acts as a generic game controller with a non-standard layout, which browsers can read. In Wii U mode it imitates Nintendo's own adapter and talks to Dolphin through a WinUSB driver, which browsers cannot read. Test in PC mode, play in Wii U mode.

Verified By Gamepad TesterVerified By Gamepad Tester
Graham Norton-Smith
Graham Norton-SmithVerified Gamepad Tester team memberGamepad Tester Team
Retro And Adapter Hardware Specialist · 17+ years experience · Answered Aug 9, 2026

Nothing is wrong with the adapter. The switch genuinely changes what kind of device it is.

In PC mode it presents itself to Windows as an ordinary game controller using the built-in HID driver. Anything that reads standard controllers can see it, browsers included. Because a GameCube pad does not match the modern layout the Gamepad API expects, the browser reports it as a non-standard device, so the button numbers look scrambled. The triggers appearing as axes is correct too: GameCube L and R are analog with a click at the end of their travel, and that click usually shows up as a separate button.

In Wii U mode it imitates Nintendo's official GameCube adapter for Wii U and Switch. Dolphin talks to that device directly over USB, which needs the WinUSB driver assigned with Zadig. At that point it is no longer a game controller as far as Windows is concerned, so browsers and joy.cpl see nothing. That is expected, and it is exactly why Dolphin's direct mode feels faithful.

So use each mode for what it is good at. Switch to PC mode to test buttons, sticks and triggers in the browser. Switch back to Wii U mode, unplug and replug, and play in Dolphin with the GameCube adapter option.

Step By Step Fix
  1. Set the switch to PC mode with the adapter unplugged, then plug it in and connect a controller to port 1.
  2. Open the gamepad tester, click the page and press A. It should appear as a non-standard device.
  3. Press every button and note which number lights. Write the map down once; it is the same for every controller on that adapter.
  4. Move the main stick and the C-stick, and pull L and R slowly. The triggers should sweep smoothly and register a click at the bottom.
  5. Test each controller in port 1 the same way, so port faults do not muddle the result.
  6. When finished, unplug, switch to Wii U mode, plug back in, and choose the GameCube adapter option in Dolphin. Use Zadig only if Dolphin reports no adapter.

Tested on: Applies to the Mayflash 4-port GameCube adapter on Windows 11 with Chrome or Edge. Mode behaviour per Dolphin community guidance on WinUSB and Zadig and the W3C Gamepad specification's non-standard mapping.

Checked by Vikram Singh on . How we verify answers

Did this fix your controller?
Was this answer helpful?
Share this guide

Community Replies 3

  • Accepted Solution
    Noah SinclairCommunity Member

    This confused me for years. PC mode for testing, Wii U mode for Dolphin. Should be printed on the box.

  • Jacob WhitmanCommunity Member

    PC mode test found a sticky Z on one controller and a C-stick that doesn't reach the edge on another. Good thing I checked before a session.

  • Yaw OwusuCommunity Member

    If Dolphin says adapter not detected in Wii U mode, try a rear USB port. The front ports on my case were flaky with it.

Add Your Reply

Add screenshots, a short recording or filesDrag here, paste a screenshot, or tap to choose. Up to 2 files, 8 MB each. JPG, JPEG, PNG, WEBP, GIF, TXT, LOG, PDF, JSON, MP4, WEBM
Graham Norton-Smith
Written and tested by

Graham Norton-SmithVerified Gamepad Tester team member

Retro And Adapter Hardware Specialist at Gamepad Tester

Graham works on legacy input hardware. Older controllers reach a browser through a USB adapter, and the adapter decides what the browser sees: button order changes, axes arrive as buttons, D-pads report as hats, and two adapters for the same console can behave nothing alike. He maps how the common adapters present themselves so that a player with a SNES or Sega pad can read a test result correctly instead of concluding their controller is broken. On Gamepad Tester he answers the adapter and legacy hardware questions.

USB controller adapterslegacy console padsHID button and axis mappingD-pad and hat switches
  • 17 answers on Gamepad Tester
  • 17+ years experience
  • Documents how common USB controller adapters present legacy pads to a browser, adapter by adapter.
  • Reviewed by Vikram Singh

The Team Behind These Answers

All 40 specialists

Each answer is written by the specialist who owns that part of the hardware, tested on a real controller, and checked by a second team member. How we verify answers

Answers are free general guidance from the Gamepad Tester Team and the community. Opening a controller or replacing a thumbstick module can void your warranty, so check the maker's support or warranty first. Battery and soldering work carries a real risk of damage or injury.

Free Controller Tests

Every test runs in your own browser with the Gamepad API. No sign up, no download, and your controller data never leaves your device.

All tools

Read Next On The Gamepad Tester Blog

All articles

Latest From The Community

The newest replies from players and the Gamepad Tester Team.

All guides