How to Tell a Software Input Delay From a Hardware One
A shot fired half a second after I pulled the trigger, the same delay I had been chasing for two weeks, faulting…
I only use my DualSense on PC, no PS5. A calibration tool told me the firmware is out of date. Is there a way to update the controller firmware from Windows?
Yes. Sony provides a firmware updater app for Windows that updates the DualSense, and the DualSense Edge, over a USB cable. Download it from Sony's official site, connect the controller by USB and follow the prompts without unplugging.
You do not need a PS5. Sony provides an official firmware updater for Windows that updates the DualSense and the DualSense Edge.
Download it only from Sony's official PlayStation website, not from third-party download sites. Install it, then run it and connect the controller with a USB-C cable that carries data when the app asks. The app checks the controller's firmware and offers the update if one is available.
The important rules during the update: keep the cable connected, do not close the app, and let it finish. Make sure the controller has some charge, and do the update on a stable USB port rather than through a hub.
Afterwards, unplug, reconnect, and check the controller in our gamepad tester to make sure every button and stick behaves normally. Tools that rely on current firmware, such as the DualShock Calibration GUI, should then allow their features.
If the updater cannot find the controller, close Steam, DS4Windows and other controller software, which can hold the device, and try another USB port and cable.
Tested on: Applies to DualSense and DualSense Edge on Windows 11. Update requirements per Sony's controller support information.
Checked by Tyler Vance on . How we verify answers
Embedded Systems And Firmware Programmer at Gamepad Tester
Alistair is an embedded systems programmer. He writes custom firmware for third-party PC gamepads and builds input-parsing test rigs on microcontrollers such as the Arduino and Raspberry Pi Pico, which means he can see what a controller is sending at the wire level rather than guessing from what the operating system reports. That is usually the fastest way to settle whether a fault is in the pad, the driver or the browser. On Gamepad Tester he answers the firmware and driver questions, including the ones where an update has broken a working controller.
Each answer is written by the specialist who owns that part of the hardware, tested on a real controller, and checked by a second team member. How we verify answers
Answers are free general guidance from the Gamepad Tester Team and the community. Opening a controller or replacing a thumbstick module can void your warranty, so check the maker's support or warranty first. Battery and soldering work carries a real risk of damage or injury.
Every test runs in your own browser with the Gamepad API. No sign up, no download, and your controller data never leaves your device.
A shot fired half a second after I pulled the trigger, the same delay I had been chasing for two weeks, faulting…
It is frustrating when the controller disconnects during the most exciting parts of a game - no one enjoys that. A…
Born from the passion of competitive gamers, SCUF controllers are the pinnacle of precision and performance…
The newest replies from players and the Gamepad Tester Team.