Skip to main content

Gamepad Tester

AnsweredVerified By Gamepad TesterVerified By Gamepad Tester

Is Replacing My Joy-Con Stick Myself Worth It, Or Should I Send It To Nintendo?

Asked by Elliot P.0 views

My original Joy-Con has bad drift and calibration doesn't help anymore. I've seen cheap replacement stick kits and even Hall effect ones. Is it a hard repair, and is it better than sending it to Nintendo?

Brand
Nintendo
Model
Joy-Con (L) HAC-015
Connection
Bluetooth
System
Windows 11
Browser
Chrome 152
Detected Controller
Joy-Con (L)
Test used in this questionStick Drift TestDetect unwanted stick movement while you keep your hands off
Open Free Test
Short Answer

Original Joy-Con sticks connect with a ribbon cable rather than solder, so replacement is a doable small-screw repair. Hall effect replacements avoid future wear drift. Check Nintendo's repair options in your region first, since they may be cheaper or free for drift.

Verified By Gamepad TesterVerified By Gamepad Tester
Chloe Henderson
Chloe HendersonVerified Gamepad Tester team memberGamepad Tester Team
Hall Effect And Thumbstick Analyst · 9+ years experience · Answered Sep 19, 2026

It is one of the more approachable controller repairs, with a couple of fiddly moments.

Original Joy-Con sticks are modules connected by a thin ribbon cable, not soldered. The repair involves opening the Joy-Con with a small tri-point screwdriver, carefully moving the battery aside, unclipping the ribbon cable, removing the old stick and fitting the new one. The fiddly parts are the tiny screws and handling the ribbon cable gently. Kits usually include the right screwdrivers.

On which stick to fit: standard replacement sticks are cheap but use the same kind of sensor, so they can drift again in time. Hall effect replacement modules for Joy-Cons avoid that wear and are popular for exactly this reason, though they cost a little more and may need calibration afterwards.

Before you start, check Nintendo's repair options in your region. Nintendo has handled Joy-Con drift repairs, and depending on where you live and the controller's history, that may be cheaper or free. Opening the Joy-Con yourself rules that out.

After any repair, calibrate the stick in the console's settings, then check it rests centred with the stick untouched.

Step By Step Fix
  1. Check Nintendo's repair options for Joy-Con drift in your region.
  2. If you repair it yourself, get a kit with a tri-point screwdriver and a replacement stick, standard or Hall effect.
  3. Open the Joy-Con, move the battery aside carefully and unclip the ribbon cable.
  4. Fit the new stick, reconnect the ribbon and reassemble.
  5. Calibrate the stick in the console settings and check it rests centred.

Tested on: Applies to original Joy-Con (L) HAC-015 and (R) HAC-016. Calibration per Nintendo's controller calibration guidance.

Checked by Thiago Alves on . How we verify answers

Did this fix your controller?
Was this answer helpful?
Share this guide

Community Replies 3

  • Accepted Solution
    Robbie GalbraithCommunity Member

    Did a Hall effect swap in about 25 minutes. Tiny screws are the hardest part.

  • Elliot PenningtonCommunity Member

    Checked and Nintendo would repair mine free in my region, so sending it in. Good tip to check first.

  • Mansi AroraCommunity Member

    Standard replacement stick drifted again after a year for me. Hall effect next time.

Add Your Reply

Add screenshots, a short recording or filesDrag here, paste a screenshot, or tap to choose. Up to 2 files, 8 MB each. JPG, JPEG, PNG, WEBP, GIF, TXT, LOG, PDF, JSON, MP4, WEBM
Chloe Henderson
Written and tested by

Chloe HendersonVerified Gamepad Tester team member

Hall Effect And Thumbstick Analyst at Gamepad Tester

Chloe is a hardware modder who works specifically on thumbstick modules. Her testing compares hall effect sticks with the carbon potentiometers they replace, across the things that actually matter to a player: resting accuracy out of the box, how the reading changes after months of use, and the magnetic interference errors that hall effect sensors can introduce when a module is fitted badly or sits too close to a motor. On Gamepad Tester she answers the questions about whether a hall effect pad or a hall effect mod is worth it, and verifies drift fixes on modules she has fitted herself.

Hall effect thumbstickspotentiometer wearstick module replacementmagnetic interferencecontroller modding
  • 13 answers on Gamepad Tester
  • 9+ years experience
  • Fits and tests hall effect and potentiometer stick modules by hand, then confirms the readings on this site's drift tests.
  • Reviewed by Thiago Alves

The Team Behind These Answers

All 40 specialists

Each answer is written by the specialist who owns that part of the hardware, tested on a real controller, and checked by a second team member. How we verify answers

Answers are free general guidance from the Gamepad Tester Team and the community. Opening a controller or replacing a thumbstick module can void your warranty, so check the maker's support or warranty first. Battery and soldering work carries a real risk of damage or injury.

Free Controller Tests

Every test runs in your own browser with the Gamepad API. No sign up, no download, and your controller data never leaves your device.

All tools

Read Next On The Gamepad Tester Blog

All articles

Latest From The Community

The newest replies from players and the Gamepad Tester Team.

All guides