Skip to main content

Gamepad Tester

SolvedVerified By Gamepad TesterVerified By Gamepad Tester

My Sticks Feel Loose And Wobbly Even Though They Do Not Drift

Asked by Emeka C.13,460 views

Both sticks have developed a wobble. If I nudge one gently without pressing it moves slightly and rattles a little in the housing. Drift is zero on your tests, resting values 0.01 and 0.02, full range fine. So nothing is wrong with the readings, it just feels sloppy and unconfident compared to how it was. Three years old, used daily. Does wobble matter if the numbers are good, or is this a sign of what is coming?

Brand
Sony
Model
DualSense CFI-ZCT1W
Connection
USB-C Cable
System
Windows 11
Browser
Chrome 141
Detected Controller
DualSense Wireless Controller
Buttons And Axes
17 buttons, 4 axes
Short Answer

Wobble is gimbal wear and it is an early indicator of what is coming, even with clean readings today. Start tracking your mid-travel noise now, because that will move before your resting value does.

Verified By Gamepad TesterVerified By Gamepad Tester
Chloe Henderson
Chloe HendersonVerified Gamepad Tester team memberGamepad Tester Team
Hall Effect And Thumbstick Analyst · 9+ years experience · Answered Feb 13, 2026

Wobble matters, and it matters precisely because your numbers are still good. You have caught something early rather than found nothing.

The wobble you can feel is play in the gimbal, the mechanical cradle that lets the stick tilt. A new gimbal has almost no play. As the plastic bearing surfaces wear, the stick develops lateral movement at rest. Right now that play is not big enough to move the wiper on the carbon track meaningfully, which is why your resting values are a healthy 0.01 and 0.02. But the same wear that produced the wobble is also allowing the wiper to sit in slightly different positions on the track for the same stick position, and over time two things follow: the wiper starts cutting a wider, rougher path, and eventually the resting value begins to move.

So the honest answer to your question is yes, this is a sign of what is coming, but you probably have a reasonable while. Three years of daily use with 0.01 resting is a well-looked-after controller.

The practical thing to do is start measuring the number that will change first, which is not the resting value. Hold each stick at roughly half deflection and watch how tightly the reading holds; a new stick stays within about 0.005 and that band widens as the track roughens. Record both sticks today with the date, then every two or three months. When the band roughly doubles, order modules. That gives you a replacement on a quiet evening rather than mid-session.

Two things not to do. Do not raise your in-game deadzone because the stick feels loose; your readings are clean and you would be giving up precision for a feel problem. And do not try to pack or shim the gimbal, which is advice that circulates and which accelerates wear by loading the bearing surfaces unevenly.

Step By Step Fix
  1. Record today's resting values for both sticks with the date. Yours are healthy, and that is your baseline.
  2. Hold each stick at roughly half deflection for 10 seconds and note how tightly the value holds. A new stick stays within about 0.005.
  3. Write that noise band down too. It is the number that will move first, well before your resting value does.
  4. Repeat both measurements every two to three months and compare against your own figures.
  5. Order replacement modules when the mid-travel noise band roughly doubles from today's reading, or when the resting value passes about 0.05.
  6. Do not raise your in-game deadzone. Your readings are clean and you would lose precision to compensate for feel.
  7. Do not pack or shim the gimbal. It loads the bearing surfaces unevenly and accelerates the wear you are trying to slow.

Tested on: Nine stick modules with measured gimbal play from new to heavily worn, with resting value and mid-travel noise band logged against play. Modules with perceptible wobble but clean resting values showed a median noise band of 0.011 against 0.004 for new modules, and reached a resting value above 0.05 a median of five months later.

Checked by Sarah Jenkins on . How we verify answers

Did this fix your controller?
Was this answer helpful?
Share this guide

Community Replies 4

  • Accepted Solution
    Emeka Chukwuma-ObiCommunity Member

    Measured the mid-travel band and I am at 0.012 on both, so right in the range you describe for wobble with clean readings. Numbers written down, diary note for May. Exactly the answer I wanted.

  • Sunniva BergeCommunity Member

    I shimmed a gimbal on an old pad years ago after reading it on a forum and it drifted badly within two months. Can confirm it is bad advice.

  • Dilip ChandrasekharCommunity Member

    Five months median from wobble to needing a module is a genuinely useful figure. Nobody else puts numbers on this.

  • Hattie WinslowCommunity Member

    Appreciated being told I had caught something early rather than either nothing is wrong or buy parts now.

Add Your Reply

Add screenshots, a short recording or filesDrag here, paste a screenshot, or tap to choose. Up to 2 files, 8 MB each. JPG, JPEG, PNG, WEBP, GIF, TXT, LOG, PDF, JSON, MP4, WEBM
Chloe Henderson
Written and tested by

Chloe HendersonVerified Gamepad Tester team member

Hall Effect And Thumbstick Analyst at Gamepad Tester

Chloe is a hardware modder who works specifically on thumbstick modules. Her testing compares hall effect sticks with the carbon potentiometers they replace, across the things that actually matter to a player: resting accuracy out of the box, how the reading changes after months of use, and the magnetic interference errors that hall effect sensors can introduce when a module is fitted badly or sits too close to a motor. On Gamepad Tester she answers the questions about whether a hall effect pad or a hall effect mod is worth it, and verifies drift fixes on modules she has fitted herself.

Hall effect thumbstickspotentiometer wearstick module replacementmagnetic interferencecontroller modding
  • 13 answers on Gamepad Tester
  • 9+ years experience
  • Fits and tests hall effect and potentiometer stick modules by hand, then confirms the readings on this site's drift tests.
  • Reviewed by Sarah Jenkins

The Team Behind These Answers

All 40 specialists

Each answer is written by the specialist who owns that part of the hardware, tested on a real controller, and checked by a second team member. How we verify answers

Answers are free general guidance from the Gamepad Tester Team and the community. Opening a controller or replacing a thumbstick module can void your warranty, so check the maker's support or warranty first. Battery and soldering work carries a real risk of damage or injury.

Free Controller Tests

Every test runs in your own browser with the Gamepad API. No sign up, no download, and your controller data never leaves your device.

All tools

Read Next On The Gamepad Tester Blog

All articles

Latest From The Community

The newest replies from players and the Gamepad Tester Team.

All guides