Small Input Problems That Quietly Ruin Your Game Sessions
There is a particular kind of bad session that never gets diagnosed. You lose a duel you should have won. Your car…
Been using silicone grip covers on both sticks for about a year because my thumbs slip otherwise. Someone told me they cause drift by adding leverage. That sounds plausible but also like the kind of thing people say without evidence. Do grips actually accelerate wear, and if so is it the leverage or something else? I would rather keep using them if the effect is small because they genuinely help me.
Grips do not add meaningful leverage and the drift claim is overstated. The real risk is trapped debris underneath them, which is abrasive. Keep them, clean under them occasionally.
The leverage argument is weaker than it sounds, and there is a real risk with grips that is different from the one you were told about.
On leverage: a grip cover adds a couple of millimetres of height to a stick that is already a few centimetres from its pivot. The change in leverage is small, and more importantly you are not applying more force because of it, you are applying the same thumb pressure through a slightly grippier surface. In our own tracking we have not been able to separate grip users from non-grip users on wear rate. So that specific claim does not hold up well.
What does hold up is contamination. A silicone cover sits over the stick cap and creates a space where skin oil, dust and debris collect, and because it is enclosed it does not get wiped away in normal use the way a bare stick does. Over a year that builds up, and some of it works down the stick shaft into the gimbal. Grit in a gimbal is abrasive and genuinely does accelerate wear, which is a real mechanism rather than a plausible-sounding one. We see noticeably more contamination in controllers that have had covers on for a long time.
So the answer is keep using them, because they solve a real problem for you, and manage the thing that actually matters. Take them off every month or two, clean the stick cap and the base of the shaft, clean the inside of the cover, and let both dry before refitting. That takes two minutes and removes the mechanism.
Two smaller points. Choose covers that fit snugly rather than loosely, since a loose cover both moves on the cap, which wears the cap's ribs and eventually makes it slip off, and lets more debris in. And check your stick caps for wear when you clean, because a cover that has been rotating on the cap can wear the ribs that hold it to the post.
And as always: record your resting values and mid-travel noise now so you can see for yourself rather than relying on anyone's claim.
Tested on: Controllers with and without silicone stick covers tracked over periods up to two years, with resting values and mid-travel noise logged and gimbals inspected on disassembly. Wear rates did not separate clearly by cover use, while covered sticks showed consistently more accumulated debris at the cap and shaft base, and two covered units had particulate in the gimbal.
Checked by Chloe Henderson on . How we verify answers
Hardware Repair Educator at Gamepad Tester
Thiago teaches controller repair. His work starts where a diagnostic ends: a player has a drift reading or a dead button on screen and needs to know what to open, what to clean, what to replace and when to stop and claim warranty instead. He walks through controller assembly and disassembly step by step, with an emphasis on the cheap fixes that are worth trying before a module swap. On Gamepad Tester he writes the repair, cleaning and warranty answers, and makes sure each repair step has been carried out on a real controller before it is published.
Each answer is written by the specialist who owns that part of the hardware, tested on a real controller, and checked by a second team member. How we verify answers
Answers are free general guidance from the Gamepad Tester Team and the community. Opening a controller or replacing a thumbstick module can void your warranty, so check the maker's support or warranty first. Battery and soldering work carries a real risk of damage or injury.
Every test runs in your own browser with the Gamepad API. No sign up, no download, and your controller data never leaves your device.
There is a particular kind of bad session that never gets diagnosed. You lose a duel you should have won. Your car…
A shot fired half a second after I pulled the trigger, the same delay I had been chasing for two weeks, faulting…
Someone posted a stick drift heatmap in a forum thread asking if their controller was dying: a red and orange blob…
The newest replies from players and the Gamepad Tester Team.