Skip to main content

Gamepad Tester

AnsweredVerified By Gamepad TesterVerified By Gamepad Tester

My USB Headset Stopped Working After The September 2026 Windows Update

Asked by Lauren H.0 views

After the latest Windows 11 update in September my USB headset either shows up with no sound or doesn't start at all. The mic test also gets nothing from it. It worked fine before the update. Is this a known problem?

Brand
Not stated
Model
USB headset
Connection
USB-A
System
Windows 11
Browser
Chrome 152
Short Answer

Yes. Microsoft confirmed that the September 2026 Patch Tuesday updates caused some USB Audio Class 1.0 devices to fail to start or play no sound. Some users reported success switching the device to 2-channel mode. Check for newer updates, since Microsoft said it was working on a fix.

Verified By Gamepad TesterVerified By Gamepad Tester
Alistair Thorne
Alistair ThorneVerified Gamepad Tester team memberGamepad Tester Team
Embedded Systems And Firmware Programmer · 9+ years experience · Answered Sep 17, 2026

You are not alone, and it is not your headset. After the September 2026 Patch Tuesday updates for Windows 11, Microsoft confirmed an issue where some USB audio devices, specifically those using the older USB Audio Class 1.0 standard, fail to start or produce no sound. Some people also reported microphones on affected devices stopping.

At the time it was reported, Microsoft said it was working on a fix and had no official workaround, but some users had success switching the device to 2-channel mode in its audio settings.

Things to try now. Check Windows Update for newer updates, since fixes for issues like this usually arrive in a later update. Try the 2-channel setting: in the device's properties, set the speaker configuration or format to a standard stereo option. Try the headset on another PC to confirm it still works there.

If you need it working urgently and nothing helps, uninstalling the problem update is an option in Windows Update's update history, though it means going without its security fixes until a corrected update arrives.

Once sound returns, use our sound test and mic test to check both directions.

Step By Step Fix
  1. Check Windows Update for newer updates and install them.
  2. Set the headset to a standard 2-channel stereo configuration in its properties.
  3. Test the headset on another PC to confirm the hardware works.
  4. Only if urgent, uninstall the problem update from update history, understanding the security trade-off.
  5. Run the sound test and mic test once it works.

Tested on: Applies to USB audio devices on Windows 11 after the September 2026 updates. Issue details per HotHardware's report on Microsoft's confirmation; check Microsoft's release notes for current status.

Checked by Tyler Vance on . How we verify answers

Did this fix your controller?
Was this answer helpful?
Share this guide

Community Replies 3

  • Accepted Solution
    Owain ProtheroCommunity Member

    2-channel mode got my old USB headset working again until the fix arrived.

  • Lauren HeathcoteCommunity Member

    Good to know it's not me. A newer update came through this week and the headset works again. Sound and mic tests both fine.

  • Aryaman GuptaCommunity Member

    Works on my other PC that hadn't updated, which confirmed it was the update.

Add Your Reply

Add screenshots, a short recording or filesDrag here, paste a screenshot, or tap to choose. Up to 2 files, 8 MB each. JPG, JPEG, PNG, WEBP, GIF, TXT, LOG, PDF, JSON, MP4, WEBM
Alistair Thorne
Written and tested by

Alistair ThorneVerified Gamepad Tester team member

Embedded Systems And Firmware Programmer at Gamepad Tester

Alistair is an embedded systems programmer. He writes custom firmware for third-party PC gamepads and builds input-parsing test rigs on microcontrollers such as the Arduino and Raspberry Pi Pico, which means he can see what a controller is sending at the wire level rather than guessing from what the operating system reports. That is usually the fastest way to settle whether a fault is in the pad, the driver or the browser. On Gamepad Tester he answers the firmware and driver questions, including the ones where an update has broken a working controller.

Controller firmwaremicrocontroller input parsingHID descriptorsdriver-level debugging
  • 22 answers on Gamepad Tester
  • 9+ years experience
  • Reads controller input at the wire level on custom test rigs to confirm whether a fault is hardware, driver or browser.
  • Reviewed by Tyler Vance

The Team Behind These Answers

All 40 specialists

Each answer is written by the specialist who owns that part of the hardware, tested on a real controller, and checked by a second team member. How we verify answers

Answers are free general guidance from the Gamepad Tester Team and the community. Opening a controller or replacing a thumbstick module can void your warranty, so check the maker's support or warranty first. Battery and soldering work carries a real risk of damage or injury.

Free Controller Tests

Every test runs in your own browser with the Gamepad API. No sign up, no download, and your controller data never leaves your device.

All tools

Read Next On The Gamepad Tester Blog

All articles

Latest From The Community

The newest replies from players and the Gamepad Tester Team.

All guides